Accelerated sintering of PtRh/Al2O3 catalysts in an oxygen periodic pulse flow

PtRh catalysts were prepared by coimpregnation, with chlorine-free precursors of a -alumina. They were sintered at 973 K under a continuous flow of O₂ (1% in Ar or air) or of a flow of Ar into which pulses of O₂ were injected periodically. Under the latter conditions the sintering was significantly accelerated, particularly for a certain value of the period of O₂ pulses.     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

Analysis of the Structure and Biosynthesis of the Lipopolysaccharide Core Oligosaccharide of Pseudomonas syringae pv. tomato DC3000

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, is important for bacterial viability in general and host–pathogen interactions in particular. Negative charges at its core oligosaccharide (core-OS) contribute to membrane integrity through bridging interactions with divalent cations. The molecular structure and synthesis of the core-OS have been resolved in various bacteria including the mammalian pathogen Pseudomonas aeruginosa. A few core-OS structures of plant-associated Pseudomonas strains have been solved to date, but the genetic components of the underlying biosynthesis remained unclear. We conducted a comparative genome analysis of the core-OS gene cluster in Pseudomonas syringae pv. tomato (Pst) DC3000, a widely used model pathogen in plant–microbe interactions, within the P. syringae species complex and to other plant-associated Pseudomonas strains. Our results suggest a genetic and structural conservation of the inner core-OS but variation in outer core-OS composition within the P. syringae species complex. Structural analysis of the core-OS of Pst DC3000 shows an uncommonly high phosphorylation and presence of an O-acetylated sugar. Finally, we combined the results of our genomic survey with available structure information to estimate the core-OS composition of other Pseudomonas species.     

机械活化-湿化学合成LiMn2O4的组成、结构与表征

以MnO2和LiOH·H2O为原料,采用机械活化与湿化学集成的方法,在水溶液中直接合成了结晶态的尖晶石锂锰氧化物.当锂含量介于3.78%～4.35%之间时,所得锂锰氧化物为纳米级球形粉末,以尖晶石结构为主,含极少量的Mn3O4杂相;在300～800℃温度范围内热处理后,Mn3O4杂相消失,尖晶石结构更趋完善.所合成的含锂5.80%的高锂样品则以LiMnO2层状结构为主,含少量Mn3O4杂相,其SEM形貌为片状;在300～700℃下热处理8 h后,层状LiMnO2转变成尖晶石LiMn2O4,Mn3O4杂相峰明显减弱并随热处理温度的升高而消失;当温度升高至700～800℃时,开始出现缺锂的Li1-xMn2O4相.结果表明:该法制备锂锰氧化物可实现锂、锰、氧在原子级水平的均匀混合,所得产物的热稳定性能良好,其化学计量组成与结构易于调整和控制.     

Use of electron microscopy on microstructure characterization of high chromium cast irons

The physical metallurgy underlying the development of cast microstructures in abrasion resistant high chromium cast irons, and their structural modification by thermal treatments is relatively complex. Structural characterisation via electron microscopy therefore has a key role to play in furthering our understanding of the phase transformations that control the microstructures and hence the service performances of these irons as wear parts. This paper shows how both scanning and especially transmission electron microscopy can provide valuable information on the nature of eutectic and secondary carbides and on the matrix structures in these irons. Particular attention is given to current characterisation research on conventionally cast 30%Cr irons that are used for applications involving corrosive wear e.g. slurry pumps and on a semi-solid cast 27%Cr iron that has a potential for applications in industry.     

玻璃包覆纯铜微丝的制备与表征

采用熔融纺丝法制备了玻璃包覆纯铜微丝,对微丝进行了组织观察以及尺寸和缺陷表征,提出了不同冷却条件下的纯铜芯丝凝固过程模型,讨论了制备过程中存在的问题并提出了相应的解决方案.结果表明:在空气中自然冷却凝固的纯铜芯丝内部组织为细等轴晶,加冷却水快速冷却凝固制备的纯铜芯丝内部的晶粒沿着微丝长度方向呈竹节状整齐排列;当微丝外径为45μm、芯丝直径为25 μm时,外径尺寸波动在6%以内,芯丝直径误差小于4%;当原料质量存在问题或制备过程中拉丝速度、冷却速度等工艺参数匹配不合理时,易导致芯丝表面存在凹坑和凹槽等缺陷.     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

Lead recovery from aqueous environment by using porous carbon of citrus fruits waste: equilibrium,kinetics and thermodynamic studies

ABSTRACT

The mixture of citrus fruits (orange, grapefruit, mandarin, and lemon) wastes was utilized to obtain high surface area activated carbon (AC) by H₃PO₄ activation. The production conditions were optimized and the optimum conditions were determined. The optimal-activated carbon (CFWAC) was characterized by various physicochemical techniques. CFWAC was also used as a sorbent for Pb (II) ions from water. Batch experiments were performed to explore the adsorption capacity and mechanism. The Langmuir isotherm and pseudo-second-order kinetic model showed good fitness to the experimental data. The maximum Pb (II) adsorption capacity of CFWAC was found to be 163.93 mg/g.     

配合物Zn(Him)2(OAc)2的室温固相合成及表征

乙酸锌与咪唑 (Him)通过室温固相反应一步合成配合物Zn(Him) 2 (OAc) 2 ,反应不需溶剂 ,2 0min即可完成 ,产率达 96% ,并用元素分析、红外光谱、热重分析、X -射线粉末衍射和X -射线单晶衍射对产物进行了表征。     

二氨基乙腈及三胺的合成及表征

利用加成反应合成了两种新化合物二 ( 2 -腈基乙基 )氨基乙腈及三 ( 2 -腈基乙基 )胺 ,用红外光谱、1 H -NMR核磁共振谱、元素分析、ES -MS质谱及热重分析对其结构和热性质进行了表征。结果证实所制备的两种化合物即为目标化合物 ,这两种化合物热性质相似 ,在 30 0℃以下具有较好的热稳定性。