Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

PRO/E在波浪圈成型模制造中的应用

介绍了波浪圈成型模的三维造型与数控加工自动编程的过程 ,并结合实例对PRO E软件的特点进行了分析 ,指出CAD CAM的运用可提高模具加工质量 ,缩短设计制造的周期。     

A new surface characterization technique: RIMAPS (Rotated Image with Maximum Average Power Spectrum)

This work introduces a new imaging technique, Rotated Image with Maximum Average Power Spectrum (RIMAPS), for use in determining orientation and characteristics of surface topography. It consists of computing the maximum value of the averaged power spectrum, given by one step of the two‐dimensional Fourier transform, for each angle of rotation of a digitized image. The basic measurement science of this technique is described and different cases are studied. The characterization of simple geometrical figures explains the meaning of peaks and their angular positions given by RIMAPS analysis. A known surface pattern made on a sample of pure copper, mechanically ground, is used to study reproducibility, dependence on image quality and topography scale relative to pixel size and magnification. Samples of pure zinc, mechanically ground and chemically etched, were used to show the main features of RIMAPS analysis when characterizing a more complicated pattern on a real surface. All the studies performed under different conditions for observation and acquisition of images give strong evidence of the stability and robustness of RIMAPS as a technique for the characterization of topography.     

Effects of brefeldin-A on Golgi morphology in human cultured fibroblasts observed in three-dimensional stereo scanning electron microscopy

Brefeldin A (BFA) has been reported to cause disassembly of the Golgi. We have used three-dimensional (3-D) high-resolution scanning electron microscopy (HRSEM) to investigate these effects in human skin fibroblast cells. The spontaneous reassembly during prolonged exposure to BFA and some effects of forskolin were observed. A BFA concentration of 5μg/ml caused Golgi complexes to become vesicular, resulting in a progressive decrease in the size of the Golgi. Morphologic changes were visible within 2 min of BFA incubation, and by 30 min no identifiable Golgi could be found. Spontaneous reassembly of the Golgi apparatus upon the removal of the BFA or with continued long-term exposure with BFA could not be confirmed. Preliminary experiments with forskolin were not effective in reversing or inhibiting the effects of BFA in human fibroblast cells grown in culture. This inability for spontaneous reassembly and nonreversal by forskolin may reflect a differential effect of BFA in various cell types. HRSEM has proven to be useful for observing 3-D morphologic effects of BFA in Golgi.     

燃气壁挂Combi的市场扫描与投资分析

简要分析了壁挂combi(采暖洗浴两用壁挂燃气炉)的市场与投资情况。     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008