Mechanical and morphological properties of carbon fiber reinforced–modified epoxy composites

Epoxy, prepared through aminomethyl 3,5,5‐trimethylcyclohexylamine hardening of diglycidylether of bisphenol‐A (DGEBA) prepolymer, toughened with polycarbonate (PC) in different proportions, and reinforced with carbon fiber, was investigated by differential scanning calorimetry, tensile and interlaminar shear strength testing, and scanning electron microscopy (SEM). A single glass transition temperature was found in all compositions of the epoxy/PC blend system. The tensile properties of the blend were found to be better than that of the pure epoxy matrix. They increased with PC content up to 10%, beyond which they decreased. The influence of carbon fiber orientation on the mechanical properties of the composites was studied, where the fiber content was kept constant at 68 wt %. Composites with 45° fiber orientation were found to have very weak mechanical properties, and the mechanical properties of the blend matrix composites were found to be better than those of the pure epoxy matrix composites. The fracture and surface morphologies of the composite samples were characterized by SEM. Good bonding was observed between the fiber and matrix for the blend matrix composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3529–3536, 2006     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

关于AUTO CAD在图形图像教学领域的多元结合应用

AUTO CAD是一款交互式计算机辅助设计以及绘图的软件,在传统的教学中很多学生都认为这款软件的学习十分困难,所以很难提起学习兴趣,还有一些学生学习了后面的知识就会忘记前面的知识,这就使得教学质量与效率很难提升。为此,教师应积极主动探索有效的教学方式,激发学生的ATUO CAD软件的学习兴趣,提升教学和学习的质量。本文就探讨ATUO CAD在图形图像教学领域的多元结合应用。     

Characterization of pedicel,paper, and larval silk from nest ofPolistes annularis (L.)

The pedicel, nest paper, and larval silk ofPolistes annularis nests were analyzed by high-resolution solid-state [¹³C]NMR. The pedicel was found to have a high nitrogen content (11%), and the NMR spectra indicated that it is a mixture of carbohydrate and protein. The pedicel protein has an amino acid composition that is very rich in glycine, alanine, serine, and proline (67% of identified residues), similar to that of some insect silks. Solid-state [¹³C]NMR indicated that the nest paper is composed predominantly of cellulose. Silk, spun by matureP. annularis larvae, was shown by [¹³C] NMR and amino acid analysis to be a protein very high in serine and alanine (53%), but the amino acid composition is distinct from that of the pedicel protein.     

Studies on crystal morphology and crystallization kinetics of polypropylene filled with CaCO3 of different size and size distribution

Changes in the crystal morphology, crystallinity, and the melting temperature of thermoplastics resulted in significant changes in the mechanical behavior of composites containing them. For this reason, the research of crystal morphology and crystallization kinetics in thermoplastic composites became an important requirement. The thermoplastic filled with the filler of different size gradation was a new method for improving processability of thermoplastic composites. We have previously reported that the melt viscosity of polypropylene (PP) composites, which were filled with 30 wt % CaCO₃ of effective size gradation, could be evidently declined. In this study, two sizes of CaCO₃, 325 meshes and 1500 meshes, were blended by different proportions and filled into PP matrix with 30 wt %. Crystal morphology and isothermal crystallization kinetics of a series of composites were characterized by differential scanning calorimeter (DSC) and polarizing microscope. The results showed that composites filled with CaCO₃ of effective size gradation leaded to a well‐crystalline order and a large crystal size, while their isothermal crystallization kinetics and crystallization rate constant (k) were declined, and their Avrami exponents (n) and crystallization half‐life (t_1/2) were increased compared with the composites filled with single size CaCO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2437–2444, 2006     

Distributions of Crystal Size from DSC Melting Traces for Polyethylenes

Melting curves, obtained by differential scanning calorimetry, are used to estimate crystal size distributions. The proposed theoretical analysis is applied to different types of polyethylene, including high‐density polyethylene (HDPE), metallocene catalyzed linear low‐density polyethylenes (m‐LLDPE), blends of m‐LLDPEs, and Ziegler‐Natta catalyzed LLDPEs (ZN‐LLDPE). Theoretical predictions are in agreement with experimental results. A generalized melting temperature equation successfully predicts the melting temperatures of all the LLDPEs, although it was initially proposed for homogeneous copolymers with excluded comonomers. A new definition of the heat of fusion for pure crystals is proposed. This heat of fusion can be calculated from the average crystal size or the crystal size number distribution.     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Novel nitrogen‐containing epoxy resin. II. Cure kinetics by differential scanning calorimetry

The isothermal and nonisothermal cure behaviors of a novel nitrogen‐containing epoxy resin (XT resin) were studied by differential scanning calorimetry (DSC). Various kinetic parameters and details of cure process were obtained based on the Avrami theory. The results indicated that Avrami method is suitable for calculating the kinetic parameters up to the gel point at least. The apparent activation energy (E_a) for isothermal cure process was in agreement with that for nonisothermal cure process. E_a value in the early stage (78.5–81.0 KJ mol^?1) was about three times than that in the later stage (23.3–26.5 KJ mol^?1). The kinetic results from Avrami theory may present a combined effect of all factors, and which is helpful to understand the cure technique for XT–DDS system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3483–3489, 2006     

New Algorithm for Binary Connected-Component Labeling Based on Run-Length Encoding and Union-Find Sets

Based on detailed analysis of advantages and disadvantages of the existing connected-component labeling (CCL) algorithm, a new algorithm for binary connected components labeling based on run-length encoding (RLE) and union-find sets has been put forward. The new algorithm uses RLE as the basic processing unit, converts the label merging of connected RLE into sets grouping in accordance with equivalence relation, and uses the union-find sets which is the realization method of sets grouping to solve the label merging of connected RLE. And the label merging procedure has been optimized: the union operation has been modified by adding the "weighted rule" to avoid getting a degenerated-tree, and the "path compression" has been adopted when implementing the find operation, then the time complexity of label merging is O(nα(n)). The experiments show that the new algorithm can label the connected components of any shapes very quickly and exactly, save more memory, and facilitate the subsequent image analysis.     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.