基于卡尔曼滤波SVM图像鉴别方法研究

研究如何区分自然图像和计算机图形判别图像问题。由于人眼难以判别真伪图像,针对传统的图像鉴别方法由于参数的设置而造成识别准确率低,从而无法准确的区分自然图像和计算机图形。提出了一种卡尔曼滤波和支持向量机分类算法相结合的高性能图像真伪鉴别方法。算法首先采用卡尔曼滤波器提取图像的各个级别的分量,求解出各级分量和判别的误差值并作为特征数据,然后采用支持向量机分类算法对特征数据进行训练判别。仿真结果表明,提出的算法可以有效的判别图像的真伪,可以有效的识别出原始自然图像和合成图像,识别率高达99%以上,同时算法的稳定性较高,具有一定的实际应用价值。     

基于叶片形态特征的葡萄品种自动识别

葡萄在全世界种植范围较广,葡萄品种识别对葡萄资源统计、新品种鉴定及遗传资源保护都有重要意义。以成熟叶片为基本材料,不变矩、面积、周长、主叶脉长度和叶柄长度等11维特征向量为基础数据,采用叶片特征选择、图像处理、特征值提取、建立分类模型等方法,运用国际葡萄与葡萄酒组织形态分类方法和改进的欧式距离等技术开发一个基于葡萄叶片数字图像的葡萄品种自动识别软件。共测试17种酿酒和3种野生葡萄,识别率达87%。该方法具有自动化、识别速度快、花费低、省时省力等特点,可应用于葡萄病虫害的识别、杂交新品种双亲的判定等。     

Isochoric specific heat of sulfur hexafluoride at the critical point: Laboratory results and outline of a spacelab experiment for the d1-mission in 1985

The specific heat at constant volume c_v shows a weak singularity at the critical point. Renormalization group techniques have been applied, predicting a universal critical behavior which has to be experimentally confirmed for different systems. In this paper an experiment is presented to measure the specific heat of SF₆ along the critical isochore (_c=0.737 g·cm^–3), applying a continuous heating method. The results cover a temperature span of –1.5×10^–2< <1.70×10^–2 [=(T–T _c)/T _c] and were strongly affected by gravity effects that emerge in the sample of 1-mm hydrostatic height near the critical point. Using regression analysis, data were fitted with functions of the form c _v/R=A × ¦¦^– + B for the one-phase state and c _v/R=A × ¦¦^– + B for the twophase state. Within their error bounds the critical values (==0.098, A/A=1.83) represent the measurements for the temperature span 3.5×10^{–5< ¦¦<2.0×10 –3}, in good agreement with theoretical predictions. In order to exclude density profiles in the specimen, which are unavoidable in terrestrial experiments due to the high compressibility of fluids at the critical point and the gravity force, a space-qualified scanning ratio calorimeter has been constructed, which will permit long-term c_v measurements under microgravity (-g) conditions. The experiment will be part of the German Spacelab mission in October 1985. The significant features of the apparatus are briefly sketched.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Changes in seebeck coefficient of Pt and Pt 10% Rh after use to 1700°C in High-purity polycrystalline alumina

A technique is presented that enables the effects of temperature on the Seebeck coefficient to be assessed for individual wires. The technique, involving a high-resolution thermoelectric scanning rig and a nonuniform conditioning furnace of known temperature profile, was applied to 0.5-mm-diameter wires of Pt and Pt 10% Rh. Changes were observed in Seebeck coefficient when these wires were used in high-purity twin-bore insulation for up to 200 h at temperatures over the range 500 to 1700°C. Contamination from the insulation was found to be transmitted by a vaporization process, having an activation energy of 3 eV. This caused changes of up to 0.14 V · °C^–1 in Pt and 0.01 V · °C^–1 in Pt 10% Rh. Rhodium transfer to the pure Pt wire changed its Seebeck coefficient by up to 5 V · °C^–1. The consequences of both processes for thermocouple pyrometry are presented.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

基于多任务卷积神经网络的虹膜图像质量评估方法

为了自动、准确、高效地评估采集图像的质量,设计了一个名为MTIQA的卷积神经网络。该网络能够输出与主观评价指标保持较高一致性的客观评估结果。MTIQA采用多任务学习策略,包含网络训练质量评估和失真类型分类两个任务,将两个任务的损失融合并构成新的损失函数。为了评估算法所得到的客观指标的可靠性,建立了名为SIR2019的单眼虹膜质量评估数据集,并召集志愿者进行主观实验以得到主观评价指标。在SIR2019和CASIA-Iris-Distance-Lamp数据集上的实验结果表明,该网络在虹膜图像质量评估上具有较好的可行性、准确性和鲁棒性。     

一种面向弱纹理图像的特征点描述子

现有的大多数特征点提取算法适用于处理纹理丰富的图像,而对于弱纹理图像则无法提取有效的特征点. 对此,提出了多邻域结构张量特征(MNSTF)算法. 基于一系列固定的邻域和图像结构张量,通过表达局部图像的结构和纹理信息,解决了弱纹理和无纹理场景下特征点提取和匹配等相关问题;同时,通过计算邻域之间的相对方向,实现了MNSTF算法特征描述子的旋转不变性. 实验结果表明,MNSTF算法在经过旋转的弱纹理图像测试集上的特征点匹配准确率达到了99.9%以上,验证了其良好的适用性、旋转不变性和鲁棒性.     

X射线透射成像技术原位追踪混凝土吸水过程

为了表征二维混凝土的传输过程,制备厚度为1 mm的混凝土薄片. 采用X射线透射成像（TXR）技术,联合扫描电镜、背散射和能谱分析技术（SEM/BSE/EDS）原位追踪水在2维混凝土薄片中的毛细自吸过程. 测试不同质量分数CsCl溶液对X射线透射图像的增强效果. 结果表明,CsCl能够提高吸水过程中混凝土薄片的TXR图像对比度,使得水在混凝土中的渗流路径更清晰、可辨. 水泥浆体在吸收CsCl后,扫描电子背散射图像的对比度显著增强. 不同位置铯原子的EDS能谱结果验证了TXR技术确定吸水前锋位置的准确性.     

电子束钎焊温度模糊控制系统

将被焊工件温度模糊控制技术应用于电子束扫描钎焊中,所研发的系统集成了电子束焊接过程控制、电子束扫描轨迹控制、工件温度模糊控制、焊接数据高速采集与存储等多项功能.通过扫描轨迹的编辑与控制,可以适应各种形状曲线钎焊缝的温度场要求;在电子束对工件进行扫描加热的同时,通过温度采集装置实时得到被焊工件的温度信号并与设定值进行对比从而得到温度偏差及偏差的变化率作为模糊控制器的两个输入变量,以模糊控制器输出控制量调节电子束流大小,从而实现钎焊温度的闭环控制.控制系统具有响应速度快、稳定时间短、稳态误差小、超调量小等特点,表明在电子束钎焊过程中采用模糊控制技术可以得到非常理想的控制效果.     

高铝高炉渣系的熔化特性

 为了掌握高Al₂O₃条件下(w(Al₂O₃)为15%以上)高炉渣系的熔化特性,利用差式扫描量热仪分析了不同w(MgO)/w(Al₂O₃)、碱度(R)以及w(Al₂O₃)对高铝高炉渣的熔化温度及熔化热的影响。试验结果表明,炉渣熔化开始温度为1 248～1 291 ℃、熔化结束温度为1 432～1 485 ℃、熔化热为137～211 J/g;当w(Al₂O₃)=15%、高w(MgO)/w(Al₂O₃)时,发生了共晶逆反应,导致高炉炉渣熔化开始温度逐渐降低,但由于高炉炉渣的液相线温度基本未变,所以炉渣熔化结束温度基本未发生改变;w(Al₂O₃)为20%时,随着w(MgO)/w(Al₂O₃)的增加,炉渣中易生成熔点较高的镁铝尖晶石,导致高炉炉渣熔化开始温度逐渐增大,与此同时,炉渣液相线温度逐渐降低,导致炉渣熔化结束温度逐渐降低;随着碱度R的增加,高炉炉渣中生成了具有高熔点的化合物、炉渣的液相线温度升高,使得高炉炉渣的熔化开始温度逐渐增加、炉渣熔化结束温度逐渐升高;随着w(Al₂O₃)的增加,发生了共晶逆反应,故炉渣的熔化开始温度逐渐降低,而随着w(Al₂O₃)的增加,炉渣中键能较大的Al—O键增多,需要在更高温度下才能实现炉渣的最终熔化,即熔化结束温度逐渐增加;随着w(MgO)/w(Al₂O₃)、R以及w(Al₂O₃)的增加,炉渣熔化热逐渐增多。分析认为,随着R的增加,炉渣中有高熔点化合物的生成,熔化热增加;随着炉渣中w(Al₂O₃)的增加,炉渣中Al—O键增多,解聚破坏熔渣结构消耗的热量增多;而随着w(MgO)/w(Al₂O₃)增加,高熔点化合物的生成或熔化开始温度降低,造成熔化热增加。