Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.     

Development of high‐definition aqueous polyvinylpyrrolidone photoresists for cathode ray tubes

Aqueous photoresists that are capable of higher resolutions than are currently employed by the cathode ray tube (CRT) industry were developed by combining photoactivators, which activate at shorter UV wavelengths with polyvinylpyrrolidone (PVP). Two photoactivators were synthesized: 4,4′‐diazido‐2,2′‐biphenyl disodium disulfonate (DABP), which has a maximum absorbance at 264 nm, and 4,4′‐diazido‐2,2′‐biphenylethane disodium disulfonate (DABPE), which has a maximum absorbance at 258 nm. The PVP/DABP and PVP/DABPE photoresists successfully imaged a pattern with resolution as small as 4.4 μm with photoactivator concentrations greater than 20% of the PVP concentration. Addition of silane and emulgen greatly improved the performance of the photoresists with more uniform coatings of thicknesses of up to 1.4 μm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1637–1644, 2006     

换热器管板厚度的快速计算

在化工生产中，换热器设备是应用最广泛的一种设备，且占主导地位。而在换热器设计过程中，管板厚度设计计算比较复杂。本文的特点是在满足GB151—1999《管壳式换热器》标准要求的前提下，介绍一种快速简便估算管板厚度的计算公式，从而达到快速确定管板厚度的目的。     

SYNTHESIS OF ACICULAR GOETHITE PARTICLES BY OXIDATION OF AQUEOUS FERROUS HYDROXIDE SUSPENSION IN A BUBBLE COLUMN WITH DRAFT TUBE

Acicular goethite particles were synthesized by oxidation of an alkaline suspension of ferrous hydroxide using a bubble column with draft tubes of different diameters at a constant temperature of 40°C. The oxidation rate increased with decreasing draft tube diameter. The mean size based on the major axis of acicular particle decreased with increasing oxidation rate and decreasing draft tube diameter. The major axis was found to grow preferentially compared with the minor axis. The mean size of major axis was correlated well to the modified reaction rate defined as a product of the reaction rate per unit volume of the reactor multiplied by the ratio of the column diameter to the draft tube diameter, irrespective of the draft tube diameter.     

On the examination of recycle on heat (and mass) transfer in concentric tubes

The effect of recycle on heat (and mass) transfer in concentric circular tubes has been investigated by finite difference methods. Theoretical results show that recycle can enhance the heat transfer rate for large Graetz numbers compared with that in an open tube (without an inner tube inserted and without recycle). Competition between a preheating effect and a residence-time effect can be used to explain the heat transfer behavior. The heat transfer rate can be further augmented, with nearly no increase in total pressure drop, by employing flow pattern B instead of flow pattern A.     

考虑初始弯曲矩形薄壁钢管砼柱管壁屈曲分析

实际工程中的钢管都是有初始弯曲的,初始弯曲的存在会降低薄壁钢管混凝土柱的承载力.采用能量法对具有初始弯曲管壁的屈曲性能进行了分析,分析结果表明,初始弯曲的存在会使管壁的宽厚比降低30%左右.     

管板和传热管胀接应力应变的数值模拟及分析

蒸汽发生器是核电厂一回路与二回路的枢纽,传热管和管板的连接处为事故多发区,而机械加工过程残留的应力是引起裂纹的主要原因.应用有限元软件对某型蒸汽发生器中的传热管和管板的胀接过程进行瞬态模拟,得到不同胀接压力下的管板和传热管的残余应力和残余应变值,为传热管和管板最佳胀接参数的确定以及工作过程中应力腐蚀的预防提供理论依据.研究结果标明,管板孔表面的残余径向应力和残余径向应变值都是随胀接压力的增加而增加,且沿着轴向的变化规律相似.     

一种开关磁阻电动机功率变换器故障诊断方法

针对现有开关磁阻电动机功率变换器故障诊断方法存在可靠性不高等问题,提出了一种新型的功率管故障诊断方法。该方法以不对称半桥型功率变换器主电路为研究对象,以常见的功率管开路和短路2种故障情况为诊断对象,通过比较母线电流估算值和实测值来判断故障,结合故障相绕组电流实现故障相的识别,必要时通过中断测试来确定故障点。选取电动机空载、低速度和高速度运行等较难实现故障诊断的工况进行了试验分析,结果表明,该方法均能完成故障类型的定性及故障点的准确定位。     

高精度冷轧不锈钢管生产

介绍了用ＬＤ型冷轧管机生产高精度冷轧不锈钢管的经验和质量保证措施。