汽车传动轴防尘罩旋转膨胀量测试系统功率计算

本文介绍了汽车传动轴防尘罩旋转膨胀量测试系统，首先对万向节进行力学建模分析，然后对各部分进行了详细计算，最后给出了计算结果。     

The form error prediction in side wall machining considering tool deflection

In this research, an effective method for the form error prediction in side wall machining with a flat end mill is suggested. The form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. The developed model can predict the surface form error accurately about 300 times faster than the previous method. Cutting forces and tool deflection are calculated considering tool geometry, tool setting error and machine tool stiffness. The characteristics and the difference of generated surface shape in up milling and down milling are discussed. The usefulness of the presented method is verified from a set of experiments under various cutting conditions generally used in die and mold manufacturing. This study contributes to real time surface shape estimation and cutting process planning for the improvement of form accuracy.     

Analysis of failed nuclear plant components

Argonne National Laboratory has conducted analyses of failed components from nuclear power- gener-ating stations since 1974. The considerations involved in working with and analyzing radioactive compo-nents are reviewed here, and the decontamination of these components is discussed. Analyses of four failed components from nuclear plants are then described to illustrate the kinds of failures seen in serv-ice. The failures discussed are (1) intergranular stress- corrosion cracking of core spray injection piping in a boiling water reactor, (2) failure of canopy seal welds in adapter tube assemblies in the control rod drive head of a pressurized water reactor, (3) thermal fatigue of a recirculation pump shaft in a boiling water reactor, and (4) failure of pump seal wear rings by nickel leaching in a boiling water reactor. Work supported by Commonwealth Edison Company under ACK 85026.     

钛合金等温锻造进展

等温锻造是一种先进的加工工艺。本文从钛合金高温变形特性、等温锻造参数选择、模具设计、润滑剂摩擦特性等诸方面全面地介绍了这种先进的锻造工艺，它的应用前景及发展方向。     

New method for determination of the pose of the grinding wheel for thinning drill points

Traditionally, twist drills are reconditioned by thinning the web so the correct chisel edge length is restored. Recently, thinning has been included in the original design of drills so as to reduce torque and tool force. Because the International Standards Organization (ISO) has a system which can comprehensively model conventional twist drills but cannot model thinning specifications, this paper presents a system for precise mathematical modeling and CNC control of a 6-axis grinding workstation for drill thinning. The presented method determines the position and orientation of the grinding wheel based on the evaluated rake and clearance angles of ISO standards for 2-flute twist drills. The mathematical model and background are discussed. For verification and demonstration, two experimental drills are produced to the identical ISO standard except that one is thinned. The modeling herein is of value to industry and research if incorporated into computer software for drill design and manufacture. It is suitable for linear notch-type cutting with controlled variable rake angle along the secondary cutting edge for purposes of thinning, notching, dubbing and advanced drill research.     

Chip geometries during high-speed machining for orthogonal cutting conditions

The originality of this work consists in taking photographs of chips during the cutting process for a large range of speeds. Contrary to methods usually used such as the quick stop in which root chips are analyzed after an abrupt interruption of the cutting, the proposed process photographs the chip geometry during its elaboration. An original device reproducing perfectly orthogonal cutting conditions is used because it allows a good accessibility to the zone of machining and reduces considerably the vibrations found in conventional machining tests. A large range of cutting velocities is investigated (from 17 to 60 m/s) for a middle hard steel (French Standards XC18). The experimental measures of the root chip geometry, more specifically the tool-chip contact length and the shear angle, are obtained from an analysis of the pictures obtained with a numerical high-speed camera. These geometrical characteristics of chips are studied for various cutting speeds, at the three rake angles −5, 0, +5° and for different depths of cut reaching 0.65 mm.     

双动压力机多杆机构的计算机辅助运动分析

运用连杆机构分析的基本组法，开发了双动压力机多样机构计算机辅助分析的通用程序包，对于不同形式的多杆机构，通过其主程序与此程序包联结，可方便有效地完成机构运动的分析计算和动态模拟，并且给出了实例说明。     

折板跌落式竖井设计约束条件研究

结合国内深层隧道排水工程-广州市东濠涌深层排水隧道,通过物理模型试验探讨了不同折板间距情况下折板竖井消能规律,并根据竖井中水流在折板间需满足的过流能力及充分消能的约束条件,研究了折板竖井消能的最大过流流量及稳定消能边界,提出了折板竖井设计应同时满足的约束条件以及折板通气孔的推荐位置。研究表明,在折板间距与折板宽度的比值小于0.408时,约束条件只有最大过流能力;当比值大于0.408时,只需考虑充分消能的约束条件。     

底轴翻转闸在支漳河生态整治工程中的应用

为了同时满足蓄水、防洪、通航和城市景观的要求,经过比选确定了底轴翻转闸在邯郸市支漳河生态整治工程中的应用,并阐述了底轴翻转闸在施工过程中的控制重点和技术难点,为类似的水利工程项目提供了借鉴。     

LLC负载超高频谐振逆变器并联特性研究

针对LLC负载1 MHz超高频感应加热电压型谐振逆变器并联运行中,串联不同电感时逆变器的工作特性进行了理论分析,探究逆变器换流角度以及LLC品质因数的变化,对逆变器输出电压存在差异时换流角度的变化进行了研究。得出1 MHz的电压型谐振逆变器在存在电感差异、电压差异时换流角度是较小的,可以保证逆变器工作在小感性换流状态。最后通过MATLAB/Simulink仿真实验验证了理论分析的正确性,并对仿真结果进行了综合分析。