连续体结构的参数化水平集统一优化

针对传统分步式结构优化设计的不足,提出一种同时进行结构拓扑、形状和尺寸统一优化的设计方法.首先采用水平集函数描述统一的结构优化模型和几何尺寸边界,通过引入紧支径向插值基函数将结构拓扑优化变量、形状优化变量和尺寸优化变量变换为基函数的扩展系数;然后取该扩展系数为设计变量,借助一种参数的变化表达3种优化要素对结构性能的影响,将复杂的多变量优化问题变换为相对简单的参数优化问题,有利于与相对成熟的优化算法相结合提高求解效率;进一步用R函数将其融合为一个整体,构造出统一优化模型,并用最优化准则法进行求解.最后通过数值案例证明了该方法的有效性和精确性.     

Parametric 3D modeling of young women's lower bodies based on shape classification

Three-dimensional (3D) human body modeling is an important research direction in the field of clothing virtual design. On the basis of 3D human body scanning, this paper studied a method to build a 3D parametric lower body model according to body classification. The research includes three main parts. (1) Anthropometry and body shape classification. We randomly selected 333 young women ages 18–25 years old in Northeast China as the experimental sample. Then we divided the lower body shape into three categories using principal component analysis and K-means clustering. (2) Determination of feature cross sections and points, and reconstruction of feature curves. According to the average values of each body type, we obtained the mean reference body by Euclidean distance method. We determined feature cross sections and points, and extracted the 3D coordinates of the feature points of the mean reference body to reconstruct the feature curves. (3) The surface lofting and establishment of parametric 3D lower body model. According to the shape characteristics of the lower body, we constructed the guiding lines for the crotch and lower limbs, and established parametric lower body models for three body types.Relevance to industry3D human modeling is an important part of garment industry digitization. This research provides an effective way to construct a parametric 3D lower body model. The method offers a reference for the parametric virtual human modeling and virtual fitting of trousers.     

双参数Bézier曲线的升二次扩展

本文以二次Bernstein基函数为例,首次提出了含双参数基函数的新扩展——αβQ—Bern-stein基函数,此类基函数具有新的特点,即基函数的扩展次数一次性升高两次,且包含了二次多项式和带一个参数的三次多项式基函数的所有性质。基于这组基函数定义了αβQ—Bézier曲线,该曲线也含有参数,具有形状可调性,当α与β取某些值时曲线能达到C4连续或在某个端点处C0连续。最后与含两个参数的升一次Bézier曲线进行比较,该曲线具有调节范围广、灵活性更强的优势。     

Ti-22Nb-6Zr(at%)合金的超弹性和形状记忆效应

用弯曲法和拉伸法测定Ti-22Nb-6Zr（at％）合金的超弹性和形状记忆效应，研究固溶处理温度对Ti-22Nb-6Zr合金组织结构及性能的影响。结果表明：固溶处理后Ti-22Nb-6Zr合金的室温组织为单一的β相，晶粒尺寸随固溶处理温度升高而增大；合金的静态弹性模量小于30GPa；Ti-22Nb-6Zr合金具有良好的超弹性和一定的形状记忆效应。室温下变形，合金的超弹性和形状记忆效应随固溶处理温度升高而提高。900℃固溶处理后的合金在室温下拉伸变形，应变为5％时，总的最大回复应变达4．12％，其中超弹性回复应变为3．91％，记忆回复应变为0.21％。     

MICROSTRUCTURE AND REVERSE SHAPE MEMORY EFFECT IN A Cu-Zn-Al ALLOY

The bainite structure in a Cu-Zn-A1 alloy related to the reverse shape memory effect hasbeen observed by means of TEM.The reverse memory effect may be improved by up to oneorder of magnitude under applied constraint stress.The widespread propagation of bainite wasconfirmed to be the diffusion controlled shear process by the parabolic configuration of sideinterface of bainite plate and the twisting of intersected bainite plates.     

GRAIN SHAPE EFFECT IN SUPERPLASTIC DEFORMATION

The method controlling grain shape in TMT processing and the effect of grain shape on char-acteristic parameters in superplastic deformation were discussed.The accommodation velocityof grahl boundary sliding,which is the dominant mechanism in superplastic deformation,andthe contribution of each mechanism to the total strain,as influenced by grain shape,were ana-lyzed.Grain shape has been shown to be an essential structural factor for superplasticity.Thenan analysis was made about the effect of grain shape on the region transition strain rate sothat a new concept,critical aspect for superplasticity,was worked out.These predictions werecompared with the measured results in an Al-Zn-Mg alloy.     

Boron Nitride Nanosheets Strengthened PVA/Borax Hydrogels with Highly Efficient Self-Healing and Rapid pH-Driven Shape Memory Effect

Self-healing hydrogels often possess poor mechanical properties which largely limits their applications in many fields. In this work, boron nitride nanosheets are introduced into a network of the poly(vinyl alcohol)/borax (PVA/borax) hydrogels to enhance the mechanical properties of the hydrogel without compromising the self-healing abilities. The obtained hydrogels exhibit excellent mechanical properties with a tensile strength of 0.410 ± 0.007 MPa, an elongation at break of 1712%, a Young's Modulus of 0.860 ± 0.023 MPa, and a toughness of 3.860 ± 0.075 MJ m⁻³. In addition, the self-healing efficiency of the hydrogels is higher than 90% within 10 min at room temperature. Benefiting from the excellent self-healing properties, the shapeability of the hydrogel fragments is observed using different molds. In addition, the hydrogels display rapid pH-driven shape memory effects and can recover to their original shape within 260 s. Overall, this work provides a new approach to hydrogels with integrated excellent mechanical properties, self-healing abilities, and rapid pH-driven shape memory effects.     

速动形状记忆合金元件设计原理

提出了评价速动双程形状记忆元件性能的主要参数,并说明了设计实用速动元件的原理和方法。     

钨尾矿微晶玻璃的形状记忆效应

研究了钨尾矿微晶玻璃的形状记忆效应（ＳＭＥ），并用Ｘ射线衍射法（ＸＲＤ）作了相分析。结果表明，钨尾矿微晶玻璃具有明显的ＳＭＥ；恢复应变随回复保温温度升高而增加；该材料随着变形量的减小，形状恢复率随之上升