一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

基于延迟捕获功能的血液切变率测量方法

对延迟捕获的基本原理进行了系统的分析,详细介绍了利用延迟捕获功能实现计时计数法测量转速的具体方法和实例.此方法已应用在粘度测试仪器中切变率指标的测量上,经实际使用表明具有软硬件结构简单、成本低、精度较高、运行可靠等优点,对于一些在嵌入式应用中需要测量转速指标时,可谓一种良好的方法.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

金属－橡胶硫化粘接过程中分子取向行为的间接证据

对金属－橡胶热硫化粘接复合体的剥离行为进行了研究，同一粘接试样的双向１８０°剥离试验显示出了巨大的差异。本文分析了弹性材料在硫化过程中的分子行为，并提出了相应的新假设，认为这是由于金属－橡胶在硫化粘接过程中分子取向交联行为所致。这种双向１８０°剥离破坏现象可被看作是金属－橡胶硫化粘接过程中分子取向行为的间接证据。     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。     

MOSFET亚阈特性分析与低温按比例缩小理论的研究

器件尺寸按比例缩小是实现超大规模集成电路的有效途径，但寄生和二级效应却将器件限在一定的水平，本文在对比分析常温与低温下小尺寸器件效应的基础上，重点研究了ＭＯＳ器件亚阈特性对器件性能及按比例缩小的影响，并根据低温工作的特点，提出了ＭＯＳ器件一种低温按比例缩小规则，该原则对低温器的优化设计，从而更大程度在提高电路与系统性能具有重要的指导意义。     

水闸闸室化算梯形横截面上不平衡剪力的分配计算

当地弹性地基梁法计算非岩石地基的水闸底板应力时，首先要求解出不平衡剪力，当闸墩截面选择梯形时（主要是边墩），常用方法是作图法，这既有误差又繁琐。所以就此推导出一个公式，可直接求解平衡剪力。     

圆杆弹性和弹—塑性扭转公式的探讨

对圆杆在线弹性阶段，弹－塑性阶段和全塑性阶段的扭转剪应力的计算公式作了分析，并推导了在材料的应力－应变关系（τ－γ关系）不服从虎克定律时，扭转真实剪应力的计算公式。文中对扭转强度计算公式的来源，物理含义及其都作了详细的说明。这对执行和理解国家ＧＢ１０１２８－８８《金属室温扭转试验方法》是有益的，而且对高校中材料力学的教学具有一定的参考价值。     

Off-Optimum Cure of Aerospace Epoxy Adhesives

Four epoxy film adhesives used in aircraft manufacture and repair have been examined to establish the effect of deviation from the cure cycle specified by the manufacturer. In addition to the variation of the cure cycle, two surface preparations of the aluminium adherends (chromic acid etch or grit blast followed by silane treatment) were evaluated. Thermal analysis was used to examine the cure envelope of the adhesive, and its extent of cure and glass transition temperature. The adhesive properties were assessed by shear strength (in both single lap joints and in Iosipescu configuration), durability (Boeing wedge test) and chemical resistance to selected aggressive fluids. The sensitivity of the performance of a particular adhesive to offoptimum cure conditions depends on its composition and needs to be determined, not predicted.     

From the individual element test to finite element templates: Evolution of the patch test

This paper starts a sequence of three articles that follow an unconventional approach in finite element research. The ultimate objective is to construct high-performance elements and element-level error estimators for those elements. The approach takes off from our previous work in high-performance elements and culminates with the development of finite element templates. The present paper concentrates on the patch test and evolved versions of the test that have played a key role in this research. Following a brief review of the historical roots, we present the Individual Element Test (IET) of Bergan and Hanssen in an expanded context that encompasses several important classes of new elements. The relationship of the IET to the multielement forms A, B and C of the patch test and to the single-element test are investigated. An important consequence of the IET application is that the element stiffness equations decompose naturally into basic and higher-order parts. The application of this decomposition to the “sanitization” of the non-convergent BCIZ element is described and verified with numerical experiments. Two sequel papers in preparation are subtitled ‘the algebraic approach’ and ‘element-level error estimation’. These apply the fundamental decomposition to the derivation of templates for specific mechanical elements and to the construction of element-level error estimators, respectively.