织构对铟凸点剪切强度的影响

制作了2种形式的铟凸点：即直接蒸发沉积的铟柱和将铟柱回流得到的铟球。同时对比了铟柱和铟球2种凸点的剪切强度，测试结果表明铟球剪切强度为5.6MPa，铟柱的剪切强度为1.9MPa，前者约为后者的2.9倍。对铟凸点微观结构的X光衍射分析发现：铟柱剪切强度低是织构弱化所致；铟球剪切强度高是由于回流破坏了铟柱的理想（101）丝织构模式，从而提高了铟球的剪切强度。     

Color Grouping in Space and Time: Evidence From Negative Color-Based Carryover Effects in Preview Search.

Five experiments addressed the role of color grouping in preview search (D. G. Watson & G. W. Humphreys, 1997). Experiment 1 used opposite color ratios of distractors in preview and second search displays, creating equal numbers of distractors in each color group in the final display. There was selective slowing for new targets carrying the majority color of the old items. This effect held when there was no bias in the preview and only the second search set had an uneven color ratio (Experiment 2). In Experiment 3, participants had foreknowledge of the target color, and effects were shown over and above those due to color biases. Experiment 4 demonstrated negative color carryover even when previews changed color. Experiment 5 showed reduced color carryover effects when previews were presented more briefly. Collectively, the results provide evidence for inhibitory carryover effects in preview search based on feature grouping. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

Biases in Social Comparative Judgments: The Role of Nonmotivated Factors in Above-Average and Comparative-Optimism Effects.

Biases in social comparative judgments, such as those illustrated by above-average and comparative-optimism effects, are often regarded as products of motivated reasoning (e.g., self-enhancement). These effects, however, can also be produced by information-processing limitations or aspects of judgment processes that are not necessarily biased by motivational factors. In this article, the authors briefly review motivational accounts of biased comparative judgments, introduce a 3-stage model for understanding how people make comparative judgments, and then describe how various nonmotivational factors can influence the 3 stages of the comparative judgment process. Finally, the authors discuss several unresolved issues highlighted by their analysis, such as the interrelation between motivated and nonmotivated sources of bias and the influence of nonmotivated sources of bias on behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Drug Onset Cues, Conditioned Withdrawal, and Drug Relapse: Comment on McDonald and Siegel (2004).

Previous research has shown that under certain conditions environmental cues associated with morphine administration induce drug-opposite conditioned effects that mimic symptoms of opiate withdrawal. R. V. McDonald and S. Siegel (see record 2004-10475-001) extend these observations by demonstrating that acute exposure to a low dose of morphine induces symptoms of opiate withdrawal in rats previously exposed to a high dose of morphine. They hypothesized that early drug onset cues, repeatedly paired with later, larger drug effects, mediate the paradoxical effect of the low drug dose on behavior. They also hypothesized that conditioned withdrawal symptoms induced by the early drug onset cues may mediate the "priming" effect of drugs on relapse and craving. The authors of this comment discuss the degree to which the literature supports this hypothesis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于延迟捕获功能的血液切变率测量方法

对延迟捕获的基本原理进行了系统的分析,详细介绍了利用延迟捕获功能实现计时计数法测量转速的具体方法和实例.此方法已应用在粘度测试仪器中切变率指标的测量上,经实际使用表明具有软硬件结构简单、成本低、精度较高、运行可靠等优点,对于一些在嵌入式应用中需要测量转速指标时,可谓一种良好的方法.     

非对称型外差激光探针

本文描述用于检测微振动的非对称型外差激光探针系统及实验结果。实验数据表明,系统检测灵敏度为1×10~(-4)nm/(Hz)~1/2将本系统用于检测薄膜电路在交变电热下的微振动以及表面波聚焦换能器的辐射声场分布,得到满意的结果。     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.