非饱和黏性土直剪强度特性及其修正分析

为研究非饱和黏性土的直剪强度特性,采用非膨胀土及两种不同干密度的弱膨胀土进行了包含低应力状态下8种不同上覆压力的直剪试验。试验结果表明,随着上覆压力的增大,最大剪应力及所对应的剪切位移逐渐增大,试验中低应力状态下测定的土体凝聚力小于高应力状态,且试验中的上覆压力对膨胀性土凝聚力的影响大于非膨胀性黏土;而低应力状态下测定的土体内摩擦角大于高应力状态。对直剪试验中上下盒接触面积减小对抗剪强度参数测定的影响进行了分析,分析表明,接触面积减小对抗剪指标有影响,但极其微小。提出对膨胀土边坡浅层破坏进行稳定性分析时应采用低应力下的抗剪强度参数。     

花岗岩残积土-土工格栅界面的后循环剪切行为研究

花岗岩残积土在华南、东南沿海、南岳、新疆等地区广泛分布,前人的研究多集中在结构性及微观特性上,后循环加载、位移演化、土壤密度等因素对筋-土界面的剪切特性及加筋作用效果的影响评估研究较少。从循环试验剪切刚度这一重要参数入手,以加载次数、加载频率值、位移振幅值、土壤重度值为自变量,应用控制变量法,通过设计循环直剪试验,得到加筋花岗岩残积土的剪切应力与剪切位移、垂直位移与剪切位移关系曲线进行观察对比,结果表明:花岗岩残积土土工格栅界面剪切刚度受位移半振幅、土壤干重度影响很大,受加载频率影响很小,循环加载并没有弱化后循环界面剪切强度,剪切位移与位移半振幅呈负相关关系。     

泄水建筑物下游冲刷坑二维数值模拟

对巨亭水电站泄水建筑物下游局部冲刷过程进行了二维数值模拟。采用RNG k-ε湍流模型封闭N-S方程、有限体积法在计算网格上离散求解、VOF方法追踪自由水面;采用C语言编写用户自定义函数,以泥沙起动切应力作为床面泥沙起动判别标准,通过分析比较水流剪切力与泥沙起动切应力大小,用以控制冲刷坑底部边界变化;采用局部重构模型和弹簧光顺模型更新计算区域和网格质量,藉以模拟和追踪局部冲刷坑边界变化。研究表明,模拟结果与实测资料符合良好。在冲刷坑的冲刷过程中,床面剪切应力随着冲刷的进程急剧减小,湍动能随着冲刷的进程减小缓慢;床面剪切应力和湍动能沿程变化均较为剧烈,床面剪切应力沿程先增大后减小,床面湍动能则沿程减小。冲刷坑的纵向平衡形态或床面泥沙起动主要决定于床面剪切应力,床面湍动能对泥沙起动也具有重要影响。     

潮汐双向流条件下丁坝水流特性研究

以长江口南支河段为原型,概化并建立水槽数学模型,研究径潮双向流条件下丁坝附近的水流结构。研究表明:丁坝一侧河岸,丁坝下游潮差远大于上游,在丁坝上游潮差小于对岸侧,下游潮差大于对岸侧;落潮时,丁坝回流区与壅水区长度大于涨潮,转流时刻,丁坝坝头附近流速相对较大;河床底部剪切应力变化在涨落急时刻最大,且落潮大于涨潮,转流时刻坝头及坝身迎水侧剪切应力增加明显。     

合成气中氨含量测定方法的改进

用快速测定仪测定气体中的氨含量，采气量为50ml，可准确测出高含量氨体积百分比含量为80%-100%和低含量氨体积百分比含量为1%-20%的样气，该仪器结构简单，易于制造，测定过程简单，结果准确，一目了然。     

Mechanical and morphological properties of carbon fiber reinforced–modified epoxy composites

Epoxy, prepared through aminomethyl 3,5,5‐trimethylcyclohexylamine hardening of diglycidylether of bisphenol‐A (DGEBA) prepolymer, toughened with polycarbonate (PC) in different proportions, and reinforced with carbon fiber, was investigated by differential scanning calorimetry, tensile and interlaminar shear strength testing, and scanning electron microscopy (SEM). A single glass transition temperature was found in all compositions of the epoxy/PC blend system. The tensile properties of the blend were found to be better than that of the pure epoxy matrix. They increased with PC content up to 10%, beyond which they decreased. The influence of carbon fiber orientation on the mechanical properties of the composites was studied, where the fiber content was kept constant at 68 wt %. Composites with 45° fiber orientation were found to have very weak mechanical properties, and the mechanical properties of the blend matrix composites were found to be better than those of the pure epoxy matrix composites. The fracture and surface morphologies of the composite samples were characterized by SEM. Good bonding was observed between the fiber and matrix for the blend matrix composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3529–3536, 2006     

Effects of apitong (Dipterocarpus spp.) extractives on bond strength development and curing rate of adhesives

Emulsion polymer isocyanate ( ), polyvinyl acetate ( ) and resorcinol-formaldehyde ( ) adhesives were used to produce single lap shear specimens using resinous and non-resinous apitong (Dipterocarpus spp.) timbers. Tests showed that joints made with highly resinous apitong were about 40% weaker than similar joints made with non-resinous apitong. The resinous apitong was treated with different solvents to yield five different extractives which were characterized by infra-red analysis. Apitong extractives were then added to and adhesives and joints made with buna (Fagus crenata), a timber known to be low in extractives and easy to bond. Joints prepared using extractive-containing adhesives were generally weaker than those made with the unmodified adhesives. RF adhesives containing extractives cured more slowly than unmodified . It is thought that the acidic nature of the extractives changes the pH of the system sufficiently to affect the curing mechanism     

等效剪切刚度的框架结构损伤识别方法

为研究有别于现有侧重于研究结构具体构件(梁、柱及支撑等)的建筑结构损伤识别方法,提出应直接从整体开展框架结构损伤识别方法.将框架结构转换成"等效剪切型"结构,数值分析表明,结构具体构件出现损伤(即刚度发生退化)时,会引起受影响层的等效剪切刚度发生变化,因此,可以采用层等效剪切刚度变化率与层抗侧刚度作为指标来进行结构损伤定位与损伤程度评定.通过大量的框架结构数值模拟计算,归纳出了一套能将损伤定位到结构层及从整体来评定结构损伤程度的方法.     

基于积分法的热非平衡效应下剪切液膜流的表面波演化模型

当液膜表面同时存在热非平衡效应和切应力作用时,引发液膜流动不稳定的扰动及其影响将更为复杂。基于边界层理论,通过建立气液界面受热非平衡效应和切应力耦合作用的液膜流动的理论模型,采用包含弱非线性项的积分法,推导出热非平衡效应下剪切液膜流的表面波积分演化模型,模型中包括了相变强度、切应力、雷诺数和倾斜角度等不同参数的影响,为分析复杂边界条件下的液膜流的演化特征和稳定性提供了一种可借鉴的理论模型。     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.