Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

向日葵壳水解-氧化-水解法制取草酸新工艺研究

研究了以植物纤维向日葵壳为原料，采用水解-氧化-水解法制取草酸（乙二酸）的新工艺。与用同类原料，其他方法制草酸相比，本工艺在提高产率，降低生产成本以及易于业化方面有很大突破。在H2SO4质量分数为70%，原料浸泡时间3h以上，m(HNO3):m（向日葵壳）=方面有很大突破，在H2SO4质量分数为70%，原料浸泡时间3h以上，m(HNO3):m(向日葵壳）=2.1:1.0；氧化-水解反应时间5h，反应温度65-70℃的条件下，草酸二水合物收率可达78.5%。     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

模糊C-球壳聚类算法及其在血液细胞图像中的应用

文章从经典的模糊C均值算法开始通过改变其中相似性的度量形式，介绍了一种模糊C球壳聚类（FCSS）算法。在将该算法应用于细胞显微图像半径统计时，采用基于形态学的图像预处理措施，可以获得FCSS算法中有关原型模式的知识，加快收敛速度并避免随机初始化造成的局部极小问题。     

粘弹性圆柱壳在轴向恒压下的动力稳定性

基于Timoshenko-Mindlin假设,得到考虑粘弹性的各向同性圆柱壳及纤维增强正交铺设层合圆柱壳在轴向恒压下的动力学方程。文中对两端简支的圆柱壳进行了分析,依Laplace变换,导出动力稳定的特征方程,由Routh-Hurwitz判据建立动力稳定性条件,对两类圆柱壳讨论了横向剪切变形的影响。     

导汽箱产生长裂纹和大面积凹陷原因分析、处理及预防对策

对硫酸废热锅炉锅筒内自然循环的导汽箱产生长裂纹和大面积凹陷的原因作了分析，提出处理该缺陷的方法，确保了锅炉的安全运行，并提高了蒸汽的品质。     

几何非线性复合材料层合固体壳单元

通过定义广义应力,提出了一个改进的刚度矩阵,以克服固体壳元的厚度自锁问题,并能保证沿复合材料层合结构厚度方向上的连续应力分布;将应力插值函数分为低阶和高阶两部分,建议了一个新的非线性变分泛函,推导了一个用于几何非线性分析的九节点固体壳单元,该单元的计算精度和效率基本上与九节点减缩积分单元相当,与同类型其他单元相比,该单元显著提高了计算效率。     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.     

Efficient modeling of panel-like structures in perforation simulations

This paper presents results of numerical simulations for impact effects in panel-like structures using solid and shell element modeling techniques. Three examples from experiments in literature have been numerically analyzed. The nonlinear transient dynamic analysis code, LS-DYNA is used in the simulations to model projectiles and panel-like targets. It is found that models established for panel-like targets using solid shell elements cannot only save significant computational effort, but also produce good results as long as the panel-like targets satisfy certain conditions. A criterion that governs the validity of modeling panel-like targets with shell elements is proposed in the paper.     

机构设计在大型柱面网壳结构施工中的应用

 将机械行业中的机构运动概念应用到大型柱面网壳结构的施工，提出一种“折叠展开式”整体提升施工技
术． 详细阐述了该项施工方法的基本思想，并推导机构运动过程的运动学和动力学公式． 通过一个工程算例的分
析，总结机构运动和动力特性．计算结果证明机构运动过程中产生的动力效应不明显，处于“折叠”状态的网壳能够
承受施工荷载．该项新技术在亚洲最大跨度的柱面网壳结构的施工中得到了成功应用，证明了它的实用性和优越性．