分离有机/有机混合物的PVA、CA系列膜及其渗透汽化性能研究(Ⅱ) 成膜条件对渗透汽化性能的影响

用溶剂完全蒸发法制备了PVA复合膜 .经对MTBE/MeOH混合物的分离实验得到了PVA复合膜的最佳成膜条件 ,即 :铸膜液中PVA、马来酸浓度分别为 7%、3% ,热处理温度130～ 15 0℃ .在 1%～ 2 %丙酮水溶液中浸泡处理 4～ 8h ,CTA中空纤维RO膜被改性成渗透汽化膜 .CTA中空纤维膜的分离性能优于其它醋酸纤维素系列膜 ,PVA/CA复合膜的性能优于PVA/PAN复合膜和CA/PAN复合膜     

聚酯纺粘土工布和GCL在垃圾填埋场中的应用

主要介绍了土工布和膨润土防水毯（GCL）在垃圾卫生填埋场应用中的特点和作用，阐述了在卫生填埋场设计中选择土工布和GCL应注意的一些问题。     

A novel integration approach for combining the components to minimize a micro-fuel cell

This work employs porous silicon as a gas diffusion layer (GDL) in a micro-fuel cell. Pt catalyst is deposited on the surface of, and inside, the porous silicon by the physical vapor deposition (PVD) method, to improve the porous silicon conductivity. Porous silicon with Pt catalyst replaces traditional GDL, and the Pt metal that remains on the rib is used to form a micro-thermal sensor in a single lithographic process.     

提高硬质合金工具使用寿命的研究

通过改变硬质合金剩余应力类型和状态，改善了硬质合金的性能，提高了硬质合金工具的使用寿命。     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

凸轮的表面裂纹分析

本文对一凸轮的表面裂纹进行了分析。渗碳后表层残余奥氏体含量过高级网状碳化物导致该凸轮在精磨过程中出现了磨削裂纹，本文还提出了二次回火或冰冷处理等改进措施来防止磨削裂纹的产生。     

有色冶金中的离子交换膜电解技术

离子膜电解技术在有色冶金工业中有重要的应用价值 ,膜的选择透过性和不同的电极过程相结合可完成各种冶金过程。综述了离子交换膜电解技术在高纯金属的制备、无机物的电化合成、多价离子氧化状态的控制及金属离子的分离等冶金领域的研究现状 ,分析了该技术的特点 ,并指出了该技术要实现工业化必须解决的主要问题     

A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC

The feasibility of a new alloy design concept utilizing the principle of ‘tungsten bronze effect’ is critically evaluated for the development of metallic bipolar plates for proton exchange membrane fuel cell (PEMFC). An austenitic stainless steel (ASS) is modified with W and La to improve the stability of the passive film in an acidic environment as well as to reduce the contact resistance by the tungsten bronze effect. The experimental ASS containing W and La was evaluated in a simulated PEMFC environment of H₃PO₄ and H₂SO₄ solutions at 80 °C, and the electrical property was evaluated by performing a contact resistance test. The test results show that the ASS modified with W and La has good passive film stability for corrosion resistance and low contact resistance. The X-ray photoelectron spectroscopy (XPS) analysis clearly suggests the possibility of the tungsten bronze effect from the change in valency state of W⁶⁺ to W⁵⁺ in the passive film formed on the modified ASS. The feasibility of a new alloy design concept utilizing the ‘tungsten bronze effect’ is well demonstrated; however, more study is highly required for the development of metallic bipolar plates of PEMFC.     

Effect of RE on Granulation of Eutectic Carbide in Ledeburite Steel

ＲｅｃｅｎｔｌｙｔｈｅｂｅｎｅｆｉｃｉａｌａｃｔｉｏｎｓｏｆＲＥｏｎｉｒｏｎａｎｄｓｔｅｅｌｓｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄａｒｏｕｎｄｔｈｅｗｏｒｌｄ．ＲＥｃａｎｎｏｔｏｎｌｙｄｅｏｘｉｄｉｚｅａｎｄｄｅｓｕｌｐｈｕｒｉｚｅｔｈｅｍｅｌｔａｎｄｆ...     

Holmium-doped Porous Silicon Prepared by a New Electrochemical Approach and Its Photoluminescence

Ｐｏｒｏｕｓｓｉｌｉｃｏｎ（ＰＳ）ｗａｓｆｏｕｎｄｔｏｅｍｉｔｖｉｓｉｂｌｅｌｕｍｉｎｅｓｃｅｎｃｅａｔｒｏｏｍｔｅｍｐｅｒａｔｕｒｅｂｙＣａｎｈａｍｉｎ１９９０［１］．Ｔｈｉｓｐｈｅｎｏｍｅｎｏｎｉｍｐｌｉｅｄａｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉ...