水电站月度调度函数的模型制定与模拟结果评价

基于统计学中多元逐步回归原理建立了多年调节水电站分月调度函数模型,并根据水电站优化调度特征确定待选自变量,用以指导电站实际优化调度运行。在考虑电站自身各约束及综合利用要求的前提下,进一步采用程序设计模拟调度函数指导水电站长系列调度运行,通过对模拟结果的全面评价,证实所建立的调度函数具有良好的指导意义和实用价值。     

基于有限体积法的G4-73型离心风机三维流场数值模拟

基于有限体积法,利用Fluent软件对G4-73型离心风机内部流场进行了全三维数值模拟。结果表明:蜗壳内的低能流体区沿轴向朝流动方向推进;叶轮内的静压和动压在叶片吸力面靠近叶轮进口处最低,叶轮流道中动压等值线呈"凸"型分布,在叶片压力面靠近叶轮出口处静压和动压达到最大值,且叶轮出口相对总压损失集中在吸力面和前盘侧。     

Root growth and phosphorus and potassium uptake by two corn genotypes in the field

In a field study P and K uptake by two corn (Zea mays L.) genotypes which differed in root growth was investigated. The effect of differences in root growth on P and K uptake was assessed using a mechanistic-mathematical model which describes nutrient uptake by growing plant roots in soil. Nitrogen was applied at 0 and 227 kg ha^–1 to Pioneer 3732 and B73xMo17 corn grown on Raub silt loam (fine-silty, mixed, mesic Aquic Argiudoll) and at 227 kg N ha^–1 to these two genotypes on Chalmers silt loam (finesilty, mixed, mesic, Typic Haplaquoll). Root growth and P and K uptake by the two corn genotypes was measured 31, 47, 75 and 91 d after planting on the Raub and 31, 47, 61 and 75 d after planting on the Chalmers soil.Root growth and P and K uptake by B73xMo17 was greater than that of Pioneer 3732 on N-fertilized Raub soil. On Chalmers soil the difference in root growth between the two genotypes resulted in an increase in K but not P uptake. The higher soil P level of the Chalmers appears to have offset possible differences in P uptake due to root size. There were no differences between the two genotypes in either the percentage of roots with root hairs, or the density or length of root hairs. Phosphorus and K uptake calculated with the simulation models for both corn genotypes on both soils over each of three growth periods agreed with observed P (Y = 0.68X + 1.71; r = 0.944^**) and K (Y = 0.88X + 15.52; r = 0.928^**) uptake. Differences in P and K uptake between B73xMo17 and Pioneer 3732 resulted primarily from the difference in root growth in the topsoil. A high correlation was found between root surface area and P (r = 0.893^**) and K (r = 0.928^**) uptake by both corn genotypes on both the soils.Journal paper No. 10,316 Purdue Univ. Agric. Exp. Stn., W. Lafayette, In 47906. Contribution from the Dep. of Agron. This paper was supported in part by a grant from the Tennessee Valley Authority.     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.     

一种基于并联机构的航天器姿态模拟装置的设计开发

航天器发射升空前进行地面测试和试验是航天器研制过程中的重要环节。文中针对一种基于并联机构的姿态模拟装置的设计开发,从位置分析、速度分析和虚拟样机的建造和仿真分析等方面对3UPS-PU并联机构进行研究,完成姿态模拟装置的设计,为航天器装配、试验和测试设备的设计提供一种新的思路。     

Influence of depth-thickness ratio of mining on the stability of a bedding slope with its sliding surface in concave deformation

In order to study the influence of depth-thickness ratio on bedding slope stability, whose sliding surface is flexural concave in shape under mining conditions, this paper aims to study the characteristics of deformation and damage of bedding sliding with depth-thickness ratios of 200:1, 150:1, 120:1, 100:1 and 50:1by adopting numerical simulation analysis software combined with laboratory-made ‘‘under the influence of mining variable sliding surface slope similar simulation test bed", and to propose identification methods for slope stability under the influence of mining. The results show that mining activities under the slope reduce slope stability. With a decrease in the mining depth ratio, the influence of mining on the slope increases gradually, and the damage to the slope gradually expands, the stability of the slope gradually reduces, fracture occurs on the slope toe and the central fissure gradually develops to the surface,and reaches slide threshold when the depth-thickness ratio is 50:1.     

Effects of parameters on rotational fine blanking of helical gear简

The application of fine blanking to the manufacturing of helical gears directly from a strip has been restricted due to the traditional linear cutting stroke of the punch and die. In this work, rotational fine blanking which combined the linear and rotational motion of punch and counterpunch was applied for the forming of helical gears. A three-dimensional （3D） rigid-plastic finite element model was developed on the DEFORM-3D platform. By finite element simulation and analysis, the influences of key parameters on the punch load and cut surface were investigated. It is shown that： 1） with increasing the counterforce or helical angle, the punch load and the depth of die roll increase; 2） with increasing blank holder force, the punch load increases while the depth of die roll decreases; 3） V-ring indenter facilitates an improvement in the quality. The results of this research reveal the deformation mechanism of rotational fine blanking of helical gears, and provide valuable guidelines for further experimental studies.     

“顶岗置换”模式培养高师准幼儿教师的探讨

＂顶岗置换＂模式不仅促进了一线学前教师的职后培训,更有利于高师准幼儿教师的培养;同时,＂顶岗置换＂对高师准幼儿教师的培养提出了相应的挑战：顶岗对学生的高要求——能否从学生变为教师,顶岗对学生的低回报——能否从教中学。提出相应策略,促进＂顶岗置换＂模式下准幼儿教师的培养。     

基于表面反应和扩散迁移控制的灰岩单裂隙渗流—溶解模型及其数值模拟

针对碳酸盐类可溶岩地区水电站坝址流场、化学场以及固相介质属性等随时间发生改变,从而对工程安全运行造成不利影响等问题,研究了灰岩地区地下水运移过程中各物理场间的相互作用,分析了影响灰岩溶解速率的两个因素,即表面反应控制和扩散迁移控制。在此基础上,建立了单裂隙中的渗流—溶解耦合模型,并进行数值求解。模拟结果表明,在垂直裂隙延伸方向,其溶蚀锋面为非齐整平面,而是呈似“虫洞”状非均一变化,而沿裂隙延伸方向即自上游侧向下游方向溶蚀程度逐渐减轻;而通过裂隙的流量呈现随时间逐渐增大的趋势,但变幅不大;根据流量求得的等效水力隙宽,其增幅和增长速率均小于实际平均隙宽;同时,化学场中Ca2+浓度的分布与裂隙开度变化具有相似性,不同时刻下上游侧反应速率R均大于下游侧。就反应机制而言,在初期均受表面反应控制,而随反应进行,位于上游补给区部位转为受扩散迁移控制,但在下游位置仍受表面反应控制。     

Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments

This paper presents a new model for simultaneous diffusion and precipitation of chemical elements in metallic matrices, a scheme for its numerical solution, and several applications to problems of internal oxidation. The model basically stands as an extension of the classical Wagner model for internal oxidation of steels, but is more much general in that it allows for an arbitrary number of diffusing chemical elements, an arbitrary number of precipitate phases with arbitrary compositions, dependence of diffusion coefficients and solubility products upon (time-dependent) temperature, etc., thus allowing for a much broader range of applications. As a counterpart, it is generally impossible to solve the complex, non-linear equations of the model analytically, but this can be done numerically. The simple but efficient numerical scheme proposed is based on explicit 1D finite differences. Experience has shown that this scheme, in spite of its rusticity and the restrictions it imposes on the time-step, is more efficient than more elaborate strategies based on the finite-element method. The applications presented are concerned with internal oxidation of steels during annealing processes. The model and associated numerical scheme allow for evaluation of the amounts of the various oxide precipitates in the external layer of the sheet. This opens the way, through numerical parametric studies of the influence of the process parameters and the chemical composition, to the improvement of existing treatments and the development of new steel grades.