Synthesis and characterization of new functional poly(urethane‐imide) crosslinked networks

To synthesize new functional poly(urethane‐imide) crosslinked networks, soluble polyimide from 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride, 4,4′‐oxydianiline, and maleic anhydride and polyurethane prepolymer from polycaprolactone diol, tolylene 2,4‐diisocyanate and hydroxyl ethyl acrylate were prepared. Poly(urethane‐imide) thin films were finally prepared by the reaction between maleimide end‐capped soluble polyimide (PI) and acrylate end‐capped polyurethane (PU). The effect of polyurethane content on dielectric constant, residual stress, morphology, thermal property, and mechanical property was studied by FTIR, prism coupler, Thin Film Stress Analyzer (TFSA), XRD, TGA, DMTA, and Nano‐indentation. Dielectric constant of poly(urethane‐imide) thin films (2.39–2.45) was lower than that of pure polyimide (2.46). Especially, poly(urethane‐imide) thin films with 50% of PU showed lower dielectric constant than other poly(urethane‐imide) thin films did. Lower residual stress and slope in cooling curve were achieved in higher PU content. Compared to typical polyurethane, poly(urethane‐imide) thin films exhibited better thermal stability due to the presence of the imide groups. The glass transition temperature, modulus, and hardness decreased with increase in the flexible PU content even though elongation and thermal expansion coefficient increased. Finally, poly(urethane‐imide) thin films with low residual stress and dielectric constant, which are strongly affected by the morphological structure, chain mobility, and modulus, can be suggested to apply for electronic devices by variation of PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 113–123, 2006     

Kinetics of microwave‐assisted polymerization of ϵ‐caprolactone

The kinetics of polymerization of ?‐caprolactone (CL) in bulk was studied by irradiating with microwave of 350 W and frequency of 2.45 GHz with different cycle‐heating periods (30–50 s). The molecular weight distributions were determined as a function of reaction time by gel permeation chromatography. Because the temperature of the system continuously varied with reaction time, a model based on continuous distribution kinetics with time/temperature‐dependent rate coefficients was proposed. To quantify the effect of microwave on polymerization, experiments were conducted under thermal heating. The polymerization was also investigated with thermal and microwave heating in the presence of zinc catalyst. The activation energies determined from temperature‐dependent rate coefficients for pure thermal heating, thermally aided catalytic polymerization, and microwave‐aided catalytic polymerization were 24.3, 13.4, and 5.7 kcal/mol, respectively. This indicates that microwaves increase the polymerization rate by lowering the activation energy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1450–1456, 2004     

Preparation and characterization of calcium carbonate/low‐density‐polyethylene nanocomposites

Calcium carbonate/low‐density‐polyethylene (LDPE) nanocomposites have been prepared by melting blend with twin‐screw extruder. The mechanical properties of composites and the dispersion of the nanoparticles were studied. The reinforcement mechanism was discussed. The results show that not only the tensile property but also the flexural modulus of the system have been evidently increased by the addition of calcium carbonate. The calcium carbonate particles have been dispersed in the matrix in the nanometer scale. The reinforcement mechanism of the calcium carbonate lies on that the calcium carbonate particles, acting as hetero‐nuclei, can induce higher crystallinity at the matrix‐particle interface compared to regions away from the interface. Consequently, in the process of the tensile test, the nanocomposites have better tensile yield strength. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of pH‐sensitive poly(vinyl alcohol‐g‐methacrylic acid) and poly(vinyl alcohol‐g‐acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior

A series of pH‐responsive hydrogels were studied as potential drug carriers for the protection of insulin from the acidic environment of the stomach before releasing in the small intestine. Hydrogels based on poly(vinyl alcohol) networks grafted with acrylic acid or methacrylic acid were prepared by a two‐step process. Poly(vinyl alcohol) hydrogels were prepared by gamma ray irradiation (50 kGy) and then followed by grafting either acrylic acid or methacrylic acid onto these poly(vinyl alcohol) hydrogels with subsequent irradiation (5–20 kGy). These graft hydrogels showed pH‐sensitive swelling behavior and were used as carriers for the controlled release of insulin. The in vitro release of insulin was observed for the insulin‐loaded hydrogels in a simulated intestinal fluid (pH 6.8) but not in a simulated gastric fluid (pH 1.2). The release behavior of insulin in vivo in a rat model confirmed the effectiveness of the oral delivery of insulin to control the level of glucose. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 636–643, 2004     

Synthesis of 2‐monoglycerides by alcoholysis of palm oil and tuna oil using immobilized lipases

Commercial immobilized lipases were used for the synthesis of 2‐monoglycerides (2‐MG) by alcoholysis of palm and tuna oils with ethanol in organic solvents. Several parameters were studied, i.e., the type of immobilized lipases, water activity, type of solvents and temperatures. The optimum conditions for alcoholysis of tuna oil were at a water activity of 0.43 and a temperature of 60 °C in methyl‐tert‐butyl ether for ～12 h. Although immobilized lipase preparations from Pseudomonas sp. and Candida antarctica fraction B are not 1, 3‐regiospecific enzymes, they were considered to be more suitable for the production of 2‐MG by the alcoholysis of tuna oil than the 1, 3‐regiospecific lipases (Lipozyme RM IM from Rhizomucor miehei and lipase D from Rhizopus delemar). With Pseudomonas sp. lipase a yield of up to 81% 2‐MG containing 80% PUFA (poly‐unsaturated fatty acids) from tuna oil was achieved. The optimum conditions for alcoholysis of palm oil were similar as these of tuna oil alcoholysis. However, lipase D immobilized on Accurel EP100 was used as catalyst at 40 °C with shorter reaction times (<12 h). This lead to a yield of ～60% 2‐MG containing 55.0‐55.7% oleic acid and 18.7‐21.0% linoleic acid.     

Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation

Microporous high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) hollow fiber membranes were prepared from polyethylene–diisodecyl phthalate solution via thermally induced phase separation. Effect of the polyethylene density on the membrane structure and performance was investigated. The HDPE membrane showed about five times higher water permeability than the LDPE membrane because it had the larger pore and the higher porosity at the outer membrane surface. The formation of the larger pore was owing to both the initial larger structure formed by spinodal decomposition and the suppression of the diluent evaporation from the outer membrane surface due to the higher solution viscosity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 471–474, 2004     

Resins containing amino and carboxylic acid groups. Synthesis,characterization, and metal ion retention properties

The crosslinked poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide], P(MAPDSA), and poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide‐co‐acrylic acid], P(MAPDSA‐co‐AA), were synthesized by radical polymerization. The resins were completely insoluble in water. Due to the lower metal ion retention of P(MAPDSA), the metal ions investigated under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) ions by batch and column equilibrium procedures were carried out only for P(MAPDA‐co‐AA), particularly for Hg(II). The resin–Hg(II) ion equilibrium was achieved before 15 min. The resin showed a maximum retention capacity value for Hg(II) at pH 2 of 1.89 meq/g. The resin showed a high selectivity to Hg(II) ions. The recovery of the resin was investigated at 25°C with different concentrations of HNO₃ and HClO₄. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 525–530, 2005     

Energy Efficiency of Two‐Phase Mixing in a Modified Bubble Column

Energy efficiency for gas liquid mixing in a modified downflow bubble column reactor has been analyzed in this paper. Efficiencies of the different parts of the bubble column have been assessed on the basis of energy dissipation. Prediction of the energy dissipation coefficient as well as energy utilization efficiency due to gas‐liquid mixing as a function of different physical, geometric and dynamic variables of the system has been done by correlation method. The distribution of energy utilization in the different zones of the column has also been analyzed. Experiments were carried out with air‐water and air‐aqueous solutions of carboxy methyl cellulose with different concentrations.     

Preparation of silk fibroin and polyallylamine composites

Composite films made of silk fibroin (SF) and polyallylamine (PAA) are prepared that contain various compositional ratios. These materials are analyzed to elucidate the resulting physical properties and to assess their potential toward advanced applications as industrial materials. The composite films are obtained from a SF and PAA binary system by dry casting from aqueous solution. These composite films exhibit excellent processability such as film forming capabilities, and the elongation at break is increased in the wet state. The differential scanning calorimetry (DSC) curves of the composites suggest that a mutual interaction takes place between the SF and PAA. This interaction is believed to occur because the endothermic peak, corresponding to the individual polymer, shifts with increasing SF content. The random coil conformation of the SF is present, regardless of the PAA blending, as confirmed by FTIR and DSC measurements. Additionally, living cells from Antheraea pernyi and Bombyx mori insect tissues are shown to grow effectively on the composite films. Maximum growth levels occur when the cultivation flask is coated with the material in SF/PAA ratios of 75:25 to 25:75. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1963–1970, 2002; DOI 10.1002/app.10491     

无隔膜槽中ACF电极成对电解脱色活性艳蓝KN-R

采用恒电流模式,同时以活性炭纤维(ACF)为阳极和阴极,在无隔膜电解槽中研究了不同电流密度下蒽醌染料活性艳蓝KN-R的电化学脱色。结果表明在1.0~1.5mA.cm-2时,电解槽中发生阳极电氧化和阴极电还原同时进行的成对电解脱色。成对电解的发生,可以提高电解槽的工作处理能力。当电流密度为1.1mA.cm-2时,脱色率达到87%。