Q195冷轧板材轧制困难原因分析

针对部分Q195冷轧板材存在轧制困难的现象，进行了现场检验与分析。带状组织、混晶现象严重导致变形强化系数偏高是造成轧制困难的主要原因。     

Development of a predictive model for polymer/solvent diffusion coefficient calculations

A new calculation procedure for free‐volume parameters is considered in this work by using viscosity prediction methods and the Levenberg‐Marquardt calculation scheme. All parameters used in the Vrentas–Duda free‐volume theory can be estimated from pure component properties. The prediction results are compared with experimental data for some polymer/solvent systems. The diffusion coefficient calculated by Vrentas–Duda theory can be used in the modeling of membrane separation processes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

橡胶Mooney—Rivlin模型材料系数对轴向刚度影响分析

在橡胶小变形范围内，采用理论推断的方法，得到在相同硬度下橡胶Mooney—Rivlin模型材料系数由C2／C1决定的关系式。并采用ABAQUS有限元软件分析的方法，结合橡胶轴向刚度常规解，分析了C2／C1不同值对橡胶轴向刚度的影响进行，结果显示其影响呈现一定规律性。     

A Broad View of Intelligence: The Theory of Successful Intelligence.

This article reviews the theory of successful intelligence and attempts to construct-validate the theory of successful intelligence. It describes 4 distinct converging operations that have been used in these attempts. Two sets involve internal validation of the structure of the theory and 2 sets external validation of the theory with outside criteria. The internal validation operations involve information-processing (componential) analyses and both exploratory and confirmatory factor analyses. The external validation operations involve correlational analysis and analyses of instructional interventions based on the theory. The results are generally supportive of the theory and suggest that conventional conceptions of intelligence may be too narrow. The theory is of use in consulting because it broadens the scope of skills one looks for in seeking "intelligent" people for hiring, retention, and promotion and in assessing a person's ability to do his or her current job. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A polynomial dynamic system approach to software design for attractivity requirement

Because of the widespread increasing application of Web services and autonomic computing, self-adaptive software is an area gaining increasing importance. Control theory provides a theoretical foundation for self-adaptive software. In this paper, we propose the use of the supervisory control theory of discrete event dynamic systems (DEDS) to provide a rigorous foundation for designing software for reactive systems. This paper focuses in particular on design of software with an attractivity requirement. It studies this problem using the polynomial dynamic system (PDS) model of DEDS. A necessary and sufficient condition for software existence and two algorithms for such software design are presented.     

钻井井架力学性能分析

钻井井架作为钻机系统设备中的关键部分,其力学性能直接关系到整套钻机系统的安全生产。文章推导了常用于分析钻井井架力学性能的理论,即线性屈曲、几何非线性和双重非线性理论。提出同时用这三种理论对钻井井架进行综合比较分析,从而合理地预见井架力学性能的方法。以A形钻井井架为例,进行了详细的分析,得到了井架的失稳形式、极限承载、破坏特征及薄弱部位,为钻井井架的设计、优化与评定提供了参考。     

Combustion of bulk density powder mixtures in a coflow of nitrogen gas: 3. The Ti-(Ti + 0.5C) layered system

Explored is the filtration combustion in Ti-(Ti + 0.5C) layered powder systems in a coflow of nitrogen gas. The presence/absence of nitrogen coflow through the layered system was found to drastically affect the character of wave propagation and structure/properties of product. The obtained data can be regarded as a basis for fabrication of new layered and composite materials in the mode of dynamic filtration combustion.      

The deposition morphology of Brownian/non-Brownian particles within a constricted tube

The deposition morphology of Brownian/non-Brownian particles within a constricted tube is investigated by applying the Brownian dynamics simulation method in the present paper. Two different geometric structures, the parabolic constricted tube (PCT) and the sinusoidal constricted tube (SCT), are adopted. The effect of various types of the total interaction energy curves of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and of the shadow area cast by those deposited particles, on the particles’ collection efficiencies are also examined. For the PCT structure, under the same interaction energy curve, it is found that the non-Brownian particles always own a higher collection efficiency than that of the Brownian particles. Since the deposition location moves closer to the constriction part of the tube, the collection efficiencies of the Brownian/non-Brownian particles increase with the decrease of flow velocity. The SCT behaves differently, it is found that the collection efficiencies of non-Brownian particles are only slightly higher than those of Brownian particles when SCT is adopted. The steep slope of the tube wall near the constriction part of SCT dominates the whole deposition process of Brownian/non-Brownian particles. In comparison with the available experimental data, it is found that the present method can give a good simulation result.     

配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。