溶胶-凝胶法制备磷钨酸-硅胶催化合成苹果酯

采用溶胶-凝胶法制备了一系列磷钨酸-硅胶催化剂(PW/SG),考察了该催化剂催化乙酰乙酸乙酯与乙二醇液相缩合制备苹果酯的反应性能。实验结果表明,PW质量分数为40%时的PW/SG催化剂表现出最佳的催化活性;40%PW/SG催化剂制备苹果酯的最佳工艺条件为:n(乙酰乙酸乙酯)∶n(乙二醇)=1∶1.2,催化剂用量占反应物质量的0.36%,带水剂环己烷用量占反应物体积的30%,反应温度383K,反应时间90min;在此条件下,乙酰乙酸乙酯的转化率可达95.5%,苹果酯的选择性大于97%;催化剂稳定性实验表明,经5次重复使用,40%PW/SG催化剂的活性基本保持不变,乙酰乙酸乙酯转化率稳定在95.0%左右。     

Sol—Gel Synthesis of Strontium-Doped Lanthanum Manganite

Strontium-doped lanthanum manganite powders were prepared using a peroxide acetate salt based solution. The stable sol was peptized by reacting ammonium hydroxide with the precursor solution. The amorphous dried gel powders exhibit a high energy level, due to their high cations coordination and small particles, to develop the perovskite phase. This crystalline phase development from powders containing monocarboxylate ligands was characterized by thermal analysis (TG, DTG, DTA), X-ray diffraction, and IR spectroscopy. The transformation from amorphous powders into a crystallized homogeneous oxycarbonate phase in a first stage corresponds to an exothermal DTA peak at 270°C. X-ray diffraction patterns and IR spectra showed similar behavior of the powders after complete organic removal, during the conversion into perovskite phase starting at approximately 630°C and achieved about 700°C and achieved about 700°C, as well as during the sintering process.     

间苯二酚－甲醛有机气凝胶的结构控制研究

以间苯二酚（Ｒｅｓｏｒｃｉｎｏｌ）－甲醛（Ｆｏｒｍａｌｄｅｈｙｄｅ）为原料，用溶胶－凝胶法和超临界干燥工艺制备了纳米多孔ＲＦ有机气凝胶。系统研究了原料配比、催化剂的使用、反应温度及溶剂用量等因素对ＲＦ气凝胶凝结时间和结构的影响，可以实现对该材料的结构进行纳米尺寸上的控制，从而为该材料的应用开发奠定了基础。     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

原料对铁合金冶炼过程的影响

介绍了铁合金冶炼时需要准备的原料，对不合格原料需要进行加工处理，达到合格粒度。并提出了影响铁合金冶炼过程有原料的粒度，配料称量，混合等重要因素。     

纳米塑料研制进展(续)

综述了纳米塑料（包括PE、PP、PVC、PET、PBT、PA）的研制、性能、应用和展望。     

树状大分子/金属纳米复合物的制备与催化作用

综述了一类新的有机/无机杂化纳米材料———树状大分子/金属纳米复合物的制备及其催化作用。树状大分子/金属纳米复合物是以树状大分子为模板或稳定剂,通过还原树状大分子内或树状大分子间螯合金属离子制备。讨论了树状大分子/金属纳米复合物在水、有机溶剂、氟/有机两相溶剂和超临界CO2中的催化作用。     

Enzymatic modification of selected functional properties of myofibril preparation obtained from mechanically recovered poultry meat

The effect of addition of 3 g/L of commercially available transglutaminase preparation to protein extracts obtained from mechanically recovered poultry meat was studied. The content of free thiol groups (–SH), thermal drip and gel texture were determined. After pre-incubation at 7–8 °C for 1, 3, 5 and 24 h, the samples were subjected to one-step heating at 50, 60, 70 and 80 °C and two-step heating at 50/80, 55/80 and 60/80 °C. The addition of preparation and the extension of pre-incubation time led to decrease of free -SH groups content. After heating, the number of thiol groups decreased, the texture was improved, but thermal drip from gels increased. The amount of –SH groups in gel extracts subjected to one-step heating decreased with simultaneous increase of mechanical strength of gels. Protein gels subjected to two-step heating exhibited higher firmness than gels subjected to one-step heating. Thus, the 3 g/L addition of transglutaminase preparation in combination with one-step thermal processing at 70 °C and pre-incubation for 3 h contributed to improvement of texture properties of model gels and low thermal drip.     

制备低硫可膨胀石墨的研究

研究了以过二硫酸铵作氧化剂低硫可膨胀石墨的制备，找到了在较低温度下，制备低硫可膨胀石墨的最佳条件。即过二硫酸铵和石墨的重量比为１５％；反应温度为５５℃；反应时间为４０ｍｉｎ；硫酸浓度为９８％；硫酸与石墨的重量比为４∶１，草酸和硝酸（浓度为６５％）的重量比为７．５％时，所制得的可膨胀石墨含硫量为０．６５％，膨胀容积为２００ｍＬ／ｇ可膨胀石墨。并且，其终端产品柔性石墨具有优良的力学性能和抗氧化性能。     

乳状液膜法制备草酸稀土

系统研究了在乳状液膜内水相直接制备草酸稀土的方法，讨论了内水相草酸浓度、表面活性剂浓度、载体浓度、外水相酸度和外水相稀土浓度对迁移率的影响，找到了制备草酸稀土的最佳条件，草酸稀土经灼烧所得的氧化物含ＲＥ２Ｏ３〉９９．５％，与萃取法相比，此方法具有成本低、能耗少、污染程度低的特点，具有工业化前景。