用生产废液回收钽制备氟钽酸钾除钨工艺研究

为了从湿法冶金生产钽、铌废液中回收Ta,先用石灰乳对生产废液进行前期处理，获得含7％～12％Ta的磷石灰渣．然后将其在HF-H2SO14-MIBK体系中萃取，得到钨杂质含量高的K2TaF7最后采用重结晶法对K2Taf7进行提纯。结果表明，用HF＋HNO3作溶剂，加热温度在90℃左右，固液比为1：14，重结晶提纯高钨K2TaF7钨杂质含量达到10μg．g^-1，符合生产高比容钽粉用K2TaF7允许钨杂质含量要求。     

Thermal analysis of polymer–water interactions and their relation to gas hydrate inhibition

Gas hydrates formed in oil production pipelines are crystalline solids where hydrocarbon gas molecules such as methane, propane, and their mixtures are trapped in a cagelike structure by hydrogen‐bonded water molecules to form undesirable plugs. Methanol and glycol are currently used to prevent these plugs via thermodynamic inhibition. Small amounts of water‐soluble polymers may provide an alternate approach for preventing gas hydrates. In this study, we expand the fundamental understanding of water–polymer systems with differential scanning calorimetry. Nonfreezable bound water was used to quantify polymer–water interactions and relate them to the chemical structure for a series of polymers, including acrylamides, cyclic lactams, and n‐vinyl amides. For good interactions, the water structure needs to be stabilized through hydrophobic interactions. An increased hydrophobicity of the pendant group also appears to favor polymer performance as a gas hydrate inhibitor. Good inhibitors, such as poly(diethyl acrylamide) and poly(N‐vinyl caprolactam), also show higher heat capacities, which indicate higher hydrophobicity, than poor performers such as polyzwitterions, in which hydrophilicity dominated. The phase behavior and thermodynamic properties of dilute polymer solutions were also evaluated through measurements of the heat of demixing and lower critical solution temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2642–2653, 2007     

Evaluation of oxidative stability of canola oils by headspace analysis

Lipid oxidation is a major factor affecting flavor quality and shelf life of vegetable oils. Oxidative stability is therefore an important criterion by which oils are judged for usefulness in various food applications. In this study a method based on headspace analysis was developed to evaluate relative oxidative stability of canola oils. The method does not require the use of chemicals, involves minimal sample preparation, and can be performed on a relatively small sample size in comparison with traditional wet chemical methods. Canola oils freshly extracted in the laboratory from different seed samples were subjected to accelerated oxidation and analyzed for PV by standard methods and headspace volatiles by solid phase microextraction/GC-MS. Forward stepwise regression analysis of the data revealed a relationship between PV and headspace concentration of the volatile lipid oxidation products hexanal and trans,trans-2,4-heptadienal. The PV calculated using this formula correlated (R ²=0.73) with those measured by conventional methods. Presented in part at the 96th Annual Meeting of the AOCS, 1–4 May 2005, Salt Lake City, UT.     

Binary blends of polyethers with fatty acids: A thermal characterization of the phase transitions

A series of binary blends of poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), and polytetrahydrofuran (PTHF), characterized by similar average molecular weights, with selected fatty acids (capric acid, lauric acid, myristic acid, palmitic acid, and stearic acid) were prepared by melt mixing. Differential scanning calorimetry was applied to characterize the phase transitions of melting and crystallization, and a synergistic effect was found to occur for PEO/fatty acid blends, as evidenced by the values of the enthalpy of the phase transition. This effect was probably due to hydrogen bonding between PEO and the fatty (carboxylic) acids, which facilitated the formation of crystalline structures; an analysis of IR spectroscopy data showed a shift in the absorption bands of OH groups. The morphology development of the PEO/carboxylic acid blends, as observed with polarizing light microscopy, could be described as spherulitic growth with spontaneous selection of the lamellar thickness. The textures of the individual fibrils, consisting of stacks of several tens of lamellae corresponding to PPO and PTHF, were less regular than the texture of PEO and showed large macroscopic heterogeneity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 861–870, 2003     

Effects of substituted aromatic heterocyclic phosphate salts on properties,crystallization, and melting behaviors of isotactic polypropylene

Nucleation effects of 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate metal salts as a nucleating agent for isotactic polypropylene (iPP) were investigated with differential scanning calorimeter and polarized optical microscope, and their effects on mechanical, optical, and heat resistance properties of iPP were also studied. The results showed that monovalent metal salts of substituted aromatic heterocyclic phosphate such as sodium salt, lithium salt, and potassium salt had a good performance. With 0.2 wt % of sodium salt, lithium salt, or potassium salt incorporated into iPP, the crystallization peak temperature of iPP could be increased by 13.5, 13.6, and 15.0°C, respectively; the mass fraction of crystallinity of iPP could be increased by about 5%; and crystallization rate was enhanced increasingly. Meanwhile the tensile strength and flexural modulus of iPP could be increased by about 10 and 30%, respectively, and the clarity and heat distortion temperature of iPP could also be improved significantly. But bivalent and trivalent metal salts of substituted aromatic heterocyclic phosphate had little effect on properties of iPP. Meanwhile the morphology study showed that the addition of monovalent sodium salt could decrease the spherulite size of iPP significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4868–4874, 2006     

提高太安堆积密度的结晶工艺研究

以季戊四醇经浓硝酸酯化后的粗制太安为原料，在溶课题上重结晶得精制成品太安，讨论了不同溶剂，结晶速度，结晶溶液pH值对太安堆积密度的影响。     

Studies on crystallization behaviors and crystal morphology of polyamide 66/clay nanocomposites

X‐ray diffraction methods, DSC thermal analysis, and polarized light microscopy (PLM) were used to investigate the structural changes of nylon 66/clay nanocomposites. PA 66/clay nanocomposites were prepared by the method of melt intercalation. The results indicate that the addition of the intercalated organo‐montmorillonite (OMMT) can induce generation of the β‐form crystal of PA 66 and substantially affect the arrangement of molecules in the α‐form crystal, although the crystallinity scarcely changes. Also, the DSC results indicate that the addition of OMMT in the PA 66 matrix leads to increases of crystallization temperatures and the full width at half maximum (FWHM) of the exothermic peaks. Moreover, the viscosity factor is the main influence on FWHM of the exothermic peaks of PA 66/clay nanocomposites. The results of nonisothermal crystallization kinetics show that OMMT has the effect of heterogeneous nucleation and leads to the decrease of the size of the spherocrystal. The heterogeneous nucleation effects of OMMTs influence the mechanism of crystallization and the growth mode of PA 66 crystals. PLM photographs verify that the size of spherocrystal is decreased and visually confirm the theory of crystallization kinetics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 756–763, 2005     

Solid‐state polymerization of poly(ethylene terephthalate). I. Experimental study of the reaction kinetics and properties

The solid‐state polymerization (SSP) reaction kinetics of poly(ethylene terephthalate) were investigated in connection with the initial precursor intrinsic viscosity (IV; molecular weight). Evaluations were performed with otherwise equivalent precursors melt‐polymerized to IVs of 0.50, 0.56, and 0.64 dL/g. The changes in the molecular weight and other properties were monitored as functions of the reaction times at solid‐state temperatures of 160–230°C. Precursors with higher initial molecular weights exhibited higher rates of SSP than those with lower initial values, as discussed in connection with the levels of crystallinity and the carboxyl and hydroxyl end‐group composition. Activation energies decreased at temperatures above 200°C, and this indicated a change in the SSP reaction mechanism. At temperatures of 200–230°C, similar activation energies were required for the polymerization of all three precursors. Lower temperature polymerizations, from 160 to 200°C, required higher activation energies for all precursors, with the 0.50‐IV material requirement almost twice as high as that calculated for the higher IV precursors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 197–212, 2003     

麝香体系结晶分离研究

研究了根据酮麝香、1,3-二甲基-2,4-二硝基-5-叔丁基苯晶体生长速度的不同,从对二者均达到饱和的溶液中分离得到1,3-二甲基-2,4-二硝基-5-叔丁基苯晶体的过程,计算了晶体生长速度并进行了实验验证。     

固相萃取净化-气相色谱-质谱法测定染料中7种指示性多氯联苯

本文建立了以固相萃取(SPE)前处理净化、结合气相色谱-质谱(GC-MS)测定染料中7种指示性多氯联苯的分析方法。该法将染料样品经溶剂萃取后,通过固相萃取(SPE)净化、浓缩,气相色谱-质谱采用选择离子监测模式(SIM)测定,以保留时间和特征离子定性,外标法定量。