Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel

According to the stress-strain curves of single-phase martensite and single-phase ferrite steels,whose compositions are similar to those of martensite and ferrite in low Si-Mn-Nb dual-phase steel,the stress-strain curve of the low Si-Mn-Nb dual-phase steel was simulated using the finite element method(FEM).The simulated result was compared with the measured one and they fit closely with each other, which proves that the FE model is correct.Based on the FE model,the microstress and microstrain of the dual...     

IBR技术与应用综述

IBR技术是一种全新的用于产生真实感图像的技术,主要应用于虚拟实景空间建立,虚拟实景空间漫游和虚拟对象展示。与传统的技术相比,IBR技术的优势主要在于图像的真实性,实时性和与用户的交互性。本文主要介绍了几种常用的IBR技术,以及IBR技术的主流应用,并进行一定的分析比较,总结了IBR技术发展的基础和关键问题。     

解代数方程时Halley迭代法的收敛性

讨论同时求解代数方程所有单根时Halley迭代法的收敛性,给出了保证其收敛的初值应满足的一个充分条件,使Halley迭代法的收敛性获得新的表述和证明。     

多孔介质中有效孔扩散系数的试验测量

提出了通过实时测量扩散过程中多孔介质浮重变化,直接测定有效扩散系数的方法.首先建立了联系有效扩散系数和试件浮重变化的数学模型,并求出了该模型的解析解;利用非线性超定方程组优化求解的方法,结合问题的解析解和实测数据,反求出模型中的参数,有效扩散系数和边界层传质系数.用上述参数预测的试件浮重变化与实测浮重变化相差很小.表明该方法的实用性和可靠性.     

Dy_2O_3掺杂对钛酸锶钡陶瓷结构性能的影响

采用草酸盐沉淀法,以硝酸锶、硝酸钡、钛酸丁酯和草酸为原料,Dy2O3为掺杂剂,制得了Ba0.6Sr0.4TiO3粉体,并于1250℃将其烧结成Ba0.6Sr0.4TiO3系电介质陶瓷。利用扫描电镜、X射线衍射及TH2818自动元件分析仪对Dy2O3掺杂量为0.2%~2%的Ba0.6Sr0.4TiO3陶瓷的微观结构和介电性能进行研究。结果表明,Dy2O3的掺杂没有影响到BST陶瓷的主晶相钙钛矿结构,且一定量的Dy3+进入到BST晶格中。BST陶瓷的介电损耗随着掺杂量的增加而逐渐减小,介电常数随着掺杂量的增加呈现先增大后减小的趋势,当掺杂量为0.5%时,介电常数最大,为4 474.48。     

GCr15轴承钢连铸过程中热物性参数的研究

借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明：GCr15轴承钢的液相线温度为1 465.7℃,固相线温度为1 328.4℃,零强度温度为1 380℃左右,零塑性温度为1 330℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.     

A force control high-order single-step-β method (HSM) for substructure pseudo-dynamic testing

This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept of equivalent shear stiffness which can meet the requirement of the HSM algorithm.A study is done to theoretically validate the technique by the numerical analysis of two-storey shear building structure,in comparison of the proposed substructure pseudo-dynamic testing algorithm with the central difference method(CDM).Then,a full-scale SPDT model,the three-storey frame-supported reinforced concrete short-limb masonry shear wall structure,is designed and tested to simulate the seismic response of the corresponding six-storey structure and verify the proposed force control HSM technique.Meanwhile,the techniques of both stiffness correction and force control are suggested to control algorithmic error,control error and measurement error.The results indicate that the force control HSM can be used in the full-scale multi-degree-of-freedom(MDOF)substructure pseudo-dynamic testing before descent segment of structure restoring force properties.     

Improved response surface method based on sample point selection strategies

In the reliability analysis of complex structures,response surface method(RSM)has been suggested as an efficient technique to estimate the actual but implicit limit state function.A set of sample points are needed to fit to the implicit function.It has been noted that the accuracy of RSM depends highly on the so-called sample points.However,the technique for point selection has had little attention.In the present study,an improved response surface method(IRSM)based on two sample point selection techniques,named the direction cosines projected strategy(DCS)and the limit step length iteration strategy(LSS),is investigated.Since it uses the sampling points selected to be located in the region close to the original failure surface,and since it needs only one response surface,the IRSM should be accurate and simple in practical structural problems.Applications to several typical examples have helped to elucidate the successful working of the IRSM.     

基于MATLAB的电路分析程序的设计与实现

对于包含众多元件和结构复杂的线性电路,采用一种系统化的方法加以处理,可以使列方程和求解方程的工作都由计算机完成.采用节点列表法,用MATLAB的脚本语言设计具有通用性的电路仿真程序,对含有电阻、电感、电容、互感、独立电源以及受控源等元件的稳态电路进行了一般性的求解和分析.     

大功率TEM法在锡铁山矿区深边部找矿中的应用效果

锡铁山铅锌矿区大功率TEM法深边部找矿研究发现,除少数异常在老地层上以外,几乎所有的异常均在滩间山群上。03线2 942 m标高走向坑道勘探发现了隐伏Ⅳ矿带片岩型矿床,与2000年发现的TEM异常吻合,从而明确了TEM法在锡铁山深边部找矿的指导意义。TEM响应电位异常曲线反映规则低阻形体的异常特征,如陡产状厚板状低阻体的双峰盖帽特征、缓产状板状低阻体的箱形或似箱形特征等,构成低阻形体的物理模型。勘探验证结果是铅锌矿体与近矿局部炭质层和黄铁矿体组成的宏观低阻形体,可视为矿床的地质模型。这两个模型是客观存在事物的两个侧面表现,它为识别矿致异常提供了科学依据。