齿轮精锻的数值模拟与实验研究

本文对空心直齿圆柱齿轮的精锻成形过程进行三维刚塑性有限元模拟和实验研究。通过有限元数值模拟和实验研究 ,得出了直齿圆柱齿轮精锻过程的金属流动规律和变形力学特征 ,揭示了直齿圆柱齿轮精锻过程的变形机理 ,数值模拟结果与实验结果吻合较好     

倾斜冷却体法制备半固态浆料的研究现状

介绍了低成本、高效率的倾斜冷却体法制备半固态浆料的方法，综述了国内外对该方法的研究现状、相关工艺参数对组织形貌的影响及需要解决的关键问题。     

低速走丝电火花线切割加工几种编程方法的探讨

对低速走丝电火花线切割机加工某一类工件的4种编程方法作了详尽的分析、比较，总结出一种最优化的方法，可达到减少差错，降低成本，避免重复劳动，提高生产效率的目的。     

钴纳米颗粒的制备及其表征

采用简单的溶液还原方法，以聚乙烯吡咯烷酮（PVP，MW=58，000）作为高分子表面修饰剂，用水合肼（50％）作为还原剂，经回流处理，成功地制备出了分散性较好的钻纳米颗粒。利用XRD、TEM、SQUID等实验方法对产物的形貌、物相及磁性进行了表征。结果表明，产物为六方结构。其饱和磁化强度为153emu／g-1．62μB／Co，是体相材料的饱和磁矩的95％，其矫顽力为5174A·m^-1。此方法的优点在于反应条件温和、成本较低，重复性强、产率高且宜于控制。     

A backward extrusion analysis by the rigid–plastic integralless–meshless method

The rigid–plastic integralless–meshless method is applied to the analysis of plane strain backward extrusion. The rigid–plastic integralless–meshless method, based on the moving least squares approximation and the partial differential equations of mechanical equilibrium, is a truly meshless method. In addition, since there is no any integration in the formulation of the rigid–plastic integralless–meshless method, this method is also an integralless method. Compared with the conventional rigid–plastic FEMs, the rigid–plastic integralless–meshless method has some advantages that are briefly no mesh generation, no remeshing and no integration. Compared with BEMs and FBEMs, the rigid–plastic integralless–meshless method is found to have some merits such as sparse matrix, no singularity, no integration and no fundamental solution. Contours of the equivalent strain rate, the equivalent strain, the equivalent stress and the shear stress, etc. of the backward extrusion analysis using the rigid–plastic integralless–meshless method are obtained successfully.     

利用铸造CAE技术优化铸造工艺

介绍了铸造商品化软件华铸CAE在优化球铁件铸造工艺中的应用。结果表明，利用铸造CAE技术，可以对不同的工艺方案进行分析、比较及优化，有助于缩短产品试制周期，减少试制损耗，提高企业经济效益和竞争能力。     

Numerically optimal design for the system with coupled complex transport phenomena-application to the Submerged Entry<Emphasis Type="Italic">Nozzle</Emphasis> in continuous slab caster

This study presents a simple and robust algorithm for the optimal design of the system with coupled complex transport phenomena: the transport phenomena comprise fluid flow, heat and mass transfer. The (1+1)-Evolution Strategy method is adopted as the optimization method. In order to analyze the transport phenomena in the complex geometry generated during the optimization procedure, thefinite volume method with a boundary fitted curvilinear coordinate system is used. To confirm the validity of the present method, the optimal design for the inner shape of the simplified two-dimensionalSubmerged Entry Nozzle in the continuous slab caster is conducted. It is shown that the resulting design of the nozzle is consistent with the purpose and constraints of the design.     

基于有限元的大型铝型材拉伸矫直设备设计方法研究

介绍了大型铝型材拉伸矫直设备的研究现状,分析了现有拉伸矫直设备的缺点,提出并设计了新型的大型铝型材拉伸矫直设备。采用有限元数值模拟方法,对大型铝型材拉伸矫直机的关键零部件受力变形状况进行了数值模拟,得到了设备关键零部件如拉伸头、移动横梁等的应力和应变分布情况,并对结构进行了优化。此种方法降低了设备制造成本,提高了设备的精度和刚度。生产实践表明:采用此方法设计的拉伸矫直机运行平稳可靠。     

渗铝304不锈钢不同实验方法的SCC敏感性评价

采用恒载荷试验方法及慢应变速率试验(SSRT)方法研究了渗铝304奥氏体不锈钢在沸腾42％MgCl2溶液中的应力腐蚀破裂(SCC)性能，分析了渗铝不锈钢SCC机理，讨论了不同试验方法对渗铝不锈钢SCC敏感性评价的影响．试验表明：渗铝处理可明显提高304钢抗SCC性能，其机理为渗铝层的环境遮断作用及对基体的电化学保护作用．两种方法在评价各种渗铝钢材料SCC性能方面有统一性：恒载荷试验中SCC敏感性指标σth高的材料，SSRT中SCC敏感性指标δi也相对较高．但两种方法中渗铝试样的断口形态表现出差异：恒载荷试验为穿晶型SCC断口，而SSRT无SCC断口特征，为韧性断口。     

一种新的变轴数控机床标定方法

本文论述了国内外并联数控机床所采用的标定方法，选择了序列法进行了标定试验。但在实际标定过程中，出现了部分数据误差较大的问题，本文针对所面临的问题，提出了数值逼近法，并应用到实际机床的标定中，获得了机床的相关参数。之后，通过数学模型的计算值和实际测量值对比，验证了数据的可靠性，从而验证了方法的可行性和正确性。