FP石膏在硫化轮胎模具上的应用

主要阐述FP石膏材料、制芯工艺过程及烘干工艺，阐述了应用硅橡胶母模复制石膏芯表面光洁度高，尺寸精度较好，硫化轮胎的铸造成品率达99％以上。     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

气干型不饱和聚酯树脂

气干型不饱和聚酯树脂是常温交联的热固性树脂。其性能优良，光泽度高，丰满度好，是优良的饰面材料。它的组成的原子灰，是理想的更新换代产品，广泛适合于金属基材的嵌填。     

新一代喷涂聚脲路面标线涂料

简述了国内路标漆的发展概况,介绍了聚天冬氨酸酯聚脲路标漆的原理、配方及应用性能。针对目前国内各种路标漆的优缺点,将聚天冬氨酸酯聚脲路标漆与它们进行比较,发现聚天冬氨酸酯聚脲路标漆具有快干、耐磨、反光效果好、施工速度快、重涂性好等优点,特别适用于路面标线涂料的应用。     

微波真空干燥高粘度的灵芝浓缩液

热敏性、高粘度物料的干燥仍是现代干燥技术中的一个难题。灵芝水提后，由薄膜蒸发器浓缩至含水量70％左右，然后采用微波真空干燥（真空度3000Pa）至水分含量10％左右，改用传统的电热真空干燥（55～60℃）至含水量6％～7％。对干燥产品的主要生物活性成分——灵芝多糖和三萜酸进行了分析检测并与其它干燥方法进行了比较。结果表明：利用微波真空干燥的灵芝产品其灵芝多糖和三萜酸的保留率与冷冻干燥产品十分接近。而比传统真空干燥（60—65℃）的产品要高得多，此外采用微波真空干燥的干燥时间要短得多。     

Ag-ZnO catalysts for UV-photodegradation of methylene blue

High surface area Ag-ZnO catalysts have been made by flame spray pyrolysis (FSP) and characterized by X-ray diffraction (XRD), nitrogen adsorption, UV–vis spectroscopy and electron microscopy (SEM and transmission electron microscopy (TEM)) combined with energy dispersive X-ray spectroscopy (EDXS) for elemental mapping. Silver metal clusters deposited directly on ZnO nanocrystals were obtained from this process. The Ag loading (1–5 at.%) controlled the Ag cluster size from 5 to 25 nm but did not influence the ZnO crystal size. Photodegradation of 10 ppm methylene blue (MB) solution was used to evaluate the performance of these FSP-made Ag-ZnO and was compared to wet-made Ag-ZnO and reference titania photocatalysts. The rate of photodegradation was optimal for Ag loading around 3 at.%. The best photocatalytic performance was exhibited by flame-made Ag-ZnO produced at the longest high-temperature residence times having high crystallinity as determined by XRD and UV–vis.     

喷雾干燥的节能分析

喷雾干燥是能耗较大的单元操作,节能工作十分重要。对喷雾干燥过程中的热量分配作了计算分析,并根据作者对喷雾干燥过程的研究及编制的程序对各种操作因素对干燥过程能耗的影响进行了分析评价,给出了干燥过程的节能措施。     

超长、超大基坑开挖对邻近地铁结构安全影响的数值模拟分析

为了研究超长、超大基坑开挖对邻近地铁结构安全影响,以西安地铁2号线周边某基坑为工程实例,通过运用数值分析软件,结合场地的水文地质和工程地质条件,建立数值模型,进行施工过程的动态模拟,同时进行现场监测,经对比数值模拟结果及监测数据,表明运用PLAXIS软件能有效的模拟基坑开挖过程中的土体变形。同时工程采用的分段、分块开挖,中心岛顺做,周边预留土台反压、使用旋喷锚索的支护方案,对复杂条件下基坑开挖对邻近地铁结构的变形影响能起到有效的控制作用,可对类似工程的设计优化提供有益的参考及借鉴。     

大冶硫酸四系列干吸塔结构特点

以干燥塔为例，介绍大冶公司硫酸四系列干吸塔的结构特点。除捕沫层简体及出气管为316L不锈钢外，其余塔体均为碳钢内衬瓷砖结构。塔底为球形底，中心排酸。采用槽管式分酸器，分酸点密度为43个/m^2，设可调闸板以保证各槽酸量均匀；闸板外设置带孔板的分布板，以消除进口酸的冲击，保证槽内酸液面平稳。比较了该塔与常规塔的不同之处，强调了设备节点的优化设计。