AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

螺杆泵的检测方法及检测标准制定

螺杆泵检测是避免不合格螺杆泵下井、螺杆泵早期失效和提高螺杆泵使用寿命与采油效益的重要技术手段。重点介绍了模拟不同工况的螺杆泵工作特性检测系统及检测定子通径为10－60mm的定子衬套偏心度检测仪的组成及其检测方法和原理。针对大庆油田的实际情况，在进行大量室内和现场试验的基础上，制定了GLB120－27、GLB40－42和GLB500－14型螺杆泵的检测标准。检测技术及其标准实施以来见到了明显效果。     

悬沙中D〉0．06mm粗粒的粒析级配组成及其改正方法

本文首先简述Ｄ＞０．０６ｍｍ泥沙的粒析沉降特性及其粒径偏粗的原因。继之对悬沙中粒径大于０．０６ｍｍ的粒析级配组成机理，及级配组成不同对标准粒径Ｄｂ与粒析粒径ＤＬ关系的影响进行了详细研究。在以上研究工作的基础上，开展了Ｄｂ与ＤＬ的比较试验，得出了粗、中、细型悬沙的Ｄｂ～ＤＬ关系和对ＤＬ的改正方法。     

制革用水乳型聚氨酯涂饰剂行业标准的制定

本文概述了制定该标准的背景，对标准的主要内容加以科学的阐述。     

On basic definitions of unified fracture mechanics terminology

The adoption of unified fracture mechanics terminology (UFMT) will promote efficient communication between specialists in different fields of fracture research, harmonization of national and international standards relating to fracture mechanics, and last but not least improvement of the existing methodology for teaching and education in fatigue and fracture. In this paper the definitions of some basic and related terms included in different standards on fracture mechanics terminology are confronted with one another. Alternative definitions of the same terms are offered. By this strategy the author tries to show that the definitions of basic and related terms appropriate for the UFMT should emerge as a consequence of harmonizing a crack model with an actual crack and then both taken together with a fracture model, laboratory test methods, and failure assessment codes.Published in Problemy Prochonsti, No. 1, pp. 17–29, January, 1996.This paper is published as a matter of discussion.     

材料研究中系列试样的单标样法 X 射线定量分析

本文提出了用一个标样进行系列试样 X 射线定量相分析的方法.它克服了一般 X 射线定量方法需要混合研磨和手续烦复的缺点以及无标样 X 射线定量方法存在病态方程不易解决的问题.该方法对常规 X 射线定量分析具有普遍的实用性.     

我国车用汽油的发展概况及发展方向探讨

介绍了我国车用汽油的发展轨迹 ,通过与国外先进标准的对比分析了我国车用汽油存在的不足 .指出我国在加入WTO后 ,更应不断升级车用汽油质量标准 ,需要从标准制定、炼油技术等多方面追赶世界先进水平 ,积极研制生产清洁型无污染汽油 ,从根本上消除汽车尾气对环境的污染 .     

浅谈水泥基渗透结晶型防水材料标准及性能指标

针对GB18445-2001《水泥基渗透结晶型防水材料》标准在使用过程中发现的一些问题，对标准中的部分性能指标的确定及试验方法提出修改意见。     

无线局域网技术及应用

无线局域网技术是目前发展迅速的技术，相对于有线局域网有许多优点。随着无线网络产品性能的提高和价格的不断下降，无线局域网技术有着广泛的应用前景。据此对无线局域网的基本概念、特点及其技术作了简单的介绍，提出了无线局域网面向应用的几种解决方案，并对发展前景作了预测。     

三种新型流量计在醋酸装置中的应用

阐述了阿牛巴、超声波、电磁等3种流量计的性能特点、选用原则和安装要点。重点分析了低压甲醇羰基化生产醋酸装置中的各种介质的特点如强腐蚀性、两相流、低电导率等,根据不同介质的特点和工艺要求选用不同类型的流量计,并且总结了这些流量计替代原有孔板、涡街、涡轮流量计的实际使用情况以及经验教训。