含三嗪环的酸酐固化剂合成及其环氧固化物性能研究

将桐油(TO)经过三(2-羟乙基)异氰尿酸酯(THEIC)改性处理后再引入顺丁烯二酸酐(MA),得到新型含有三嗪环的酸酐固化剂(TTA)。通过红外光谱分析确定了其结构,用TGA分析结果表明,其与E44环氧树脂的固化物耐热指数达到174.5℃,在空气气氛中的热老化性能优于用THEIC和双马来酰亚胺改性的桐油酸酐固化剂的环氧固化物。     

硫化监控系统软件

硫化监控软件采用VB.NET编程语言，具有更强的功能。着重论述了软件的几个主要模块的功能及如何编程来实现这些功能，包括通讯模块、数据库模块、曲线图处理模块、报警监测与控制模块等。该软件已在用户中使用，具有一些新功能。     

高性能环氧树脂涂料的研制

以甲基丙烯酸、丙烯酸丁酯及苯乙烯的聚合为接枝体，在过氧化苯甲酰作用下对E-51环氧树脂进行接枝改性，同时对三乙烯四胺进行曼尼希改性，制得多种改性固化剂，并用其与改性的环氧树脂配制成涂料，实验结果表明，当苯酚、甲醛和三乙烯四胺的物质的量比为3：3：1时固化剂的固化性能最好。     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

A Solder Alloy Filled Z-Axis Conductive Epoxy Adhesive

Epoxy adhesives filled with four different volume fractions of eutectic tin-bismuth solder alloy were prepared and the effect of filler content on the electrical and mechanical properties of these anisotropic electrically conductive adhesives was investigated. The results show that the adhesive containing the lowest amount of the filler alloy had the best combination of conductivity, insulation resistance and shear strength. The DSC-measurements suggested that the filler melts before the cure of the resin begins which allows the filler to wet and bond well to the conductors. This was verified by SEM/EPMA examinations. A temperature cycling test and high humidity, high temperature treatment were conducted on the best composite adhesive. The temperature variation had no effect on conductivity of the joints while humid and hot environment decreased the conductivity.     

Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A

The curing kinetics of bismaleimide modified with diallylbisphenol A were investigated for different ratios of 1,1′‐(methylene di‐4,1‐phenylene) bismaleimide and diallylbisphenol A with differential scanning calorimetry. Multiheating‐rate and isothermal methods were used to study the kinetics of the curing process. The results indicated that the activation energy changed with the extent of conversion. The activation energy obtained by the multiheating‐rate method was higher than that obtained by the isothermal method. Two kinetic models (autocatalytic and nth‐order) were successfully used to model the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2229–2240, 2003     

UV涂料在户外的应用

本文简述了辐射固化技术的发展历史，回顾了我国辐射固化涂料的发展状况，介绍了户外用UV涂料的特点、制备及国外最新进展。     

改性蓖麻油制备UV光固化涂料的研究

研究了改性蓖麻油制备UV光固化涂料。由蓖麻油、环氧丙烯酸树脂UVR6100、光引发剂UVI6990制得的涂料具有优良的光泽、良好的柔韧性、良好的附着力与硬度，且当改性蓖麻油含量为40％时，漆膜性能最为优良。     

榫边扣合管状密闭输送带的制作及其质量优化

对用于制药、精细化工、建材业等输送松散及粉、粒物料不污染环境的榫边扣合管状密闭输送带的结构特点、技术要求、制造工艺和优化制品质量的技术措施及效果进行了实验探讨。     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003