液位定量式灌装机的灌装精度概率模型与可靠度计算模型

描述了控制液位定量式灌装机的灌装时间与灌装精度的关系，推导出实际灌装时间的理论计算公式。针对实际存在的各种随机变量对灌装时间的影响，建立了灌装时间的概率模型，提出基于灌装时间随机误差的灌状精度以及灌装精度可靠度概念，并相应建立出灌装精度概率模型与灌装精度可靠度计算模型。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

Process Variables, Gelatinized Starch and Moisture Effects on Physical Properties of Mungbean Noodles

The effects of amounts of gelatinized starch and moisture in the final slurry or dough, cooking time, holding time, and holding temperature on physical properties of mungbean noodles were studied. Cooking loss, cutting stress, work to cut, and transparency of noodles were measured. Moisture content of the final slurry or dough, cooking time, and holding temperature were the most important factors that affected physical properties of mungbean noodles. Processing should be done at moisture contents not exceeding 55%, cooking times not longer than 40 set, and holding temperatures not lower than 3° using 5% of total starch as gelatinized starch and holding time of 36 hr.     

方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。     

一种混沌信号去噪方法的研究

以Takens嵌入定理和影子定理为理论依据，提出一种能对混沌信号去噪的局部投影方法。该方法不需潜在动力学系统的先验知识，符合工程实用的要求。通过实验结果表明这种方法对混沌信号去噪很有效。     

Techniques for estimating test length under random test

When a circuit is tested using random or pseudorandom patterns, it is essential to determine the amount of time (test length) required to test it adequately. We present a methodology for predicting different statistics of random pattern test length. While earlier methods allowed estimation only of upper bounds of test length and only for exhaustive fault coverage, the technique presented here is capable of providing estimates of all statistics of interest (including expected value and variance) for all coverage specifications.Our methodology is based on sampling models developed for fault coverage estimation [1]. Test length is viewed as awaiting time on fault coverage. Based on this relation we derive the distribution of test length as a function of fault coverage. Methods of approximating expected value and variance of test length are presented. Accuracy of these approximations can be controlled by the user. A practical technique for predicting expected test length is developed. This technique is based on clustering faults into equal detectability subsets. A simple and effective algorithm for fault clustering is also presented. The sampling model is applied to each cluster independently and the results are then aggregated to yield test lengths for the whole circuit. Results of experiments with several circuits (both ISCAS '85 benchmarks and other practical circuits) are also provided.This work was done while the author was with the Department of Electrical Engineering, Southern Illinois University, Carbondale, IL 62901.     

桩柱式采金船每帮挖方量的理论计算

本文从理论上推导出了桩柱式采金船每帮挖方量计算的数学模型并，可广泛地用于设计与生产中，从而提高采金船设计的准确性，以及对生产矿山进行矿量、回收率和实收品位等采选指标收测的可靠性。     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Analytical general results for handoff dwell time distribution in wireless networks

1 Introduction The calling dwell time characteristic is critical for the user network planning and deployment, e.g., global system for mobile communications (GSM), as well as the next generation wireless multimedia networks, such as, the currently standar…     

ACCELERATION AMBIGUITY FUNCTION OF RADAR SIGNALS AND ITS APPLICATION

High acceleration of radar targets is analyzed using Acceleration Ambiguity Function(AAF). The acceleration resolution based on AAF is defined. The AAF and acceleration resolution of rectangle pulse signal are derivated and the conclusion that its acceleration resolution is in inverse proportion with the square of its duration is drawn. In the end, these conclusions are applied to the parameter designing and performance evaluation for a certain type of pulse Doppler radar.