Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

Surface Hardening of High-Strength Low Alloy Steels (HSLA) Dual-Phase Steels by Ball Burnishing Using Factorial Design

Burnishing is used increasingly as a finishing operation which gives additional advantages such as increased hardness, fatigue strength, and wear resistance. Experimental work based on 3⁴ factorial design was carried out to establish the effects of ball burnishing parameters on the surface hardness of high-strength low alloy steels (HSLA) dual-phase (DP) steel specimens. Statistical analysis of the results shows that the speed, feed, lubricant and ball diameter have significant effect on surface hardness.     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于TiNi合金的超弹性对其相关磨损机制的FEM研究

本文在重点考虑TiNi合金高弹性变形量的前提下，采用等向强化模型，对不锈钢和超弹TiNi合金在法向接触载荷作用下的六种模型进行了有限元(FEM)分析。结果表明：在相同载荷条件下，超弹TiNi合金产生的von Mises弹性应变要高于不锈钢，但其von Mises应力和塑性应变却恰恰相反，在同一载荷下该合金发生塑性变形的区域要小于不锈钢；此外，超弹TiNi合金发生塑性变形要比不锈钢困难，所需的临界载荷值随其最大弹性变形量(屈服点处的应变值)的增加而增加。最后，基于本文的有限元计算结果对超弹TiNi合金的蘑粒磨损和疲劳磨损机制进行了讨论。     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

Efficient and accurate approach for powder compaction problems

 In this paper, a new approach for powder cold compaction simulations is presented. A density-dependent plastic model within the framework of finite strain multiplicative hyperelastoplasticity is used to describe the highly nonlinear material behaviour; the Coulomb dry friction model is used to capture friction effects at die-powder contact; and an Arbitrary Lagrangian–Eulerian (ALE) formulation is used to avoid the (usual) excessive distortion of Lagrangian meshes caused by large mass fluxes. Several representative examples, involving structured and unstructured meshes are simulated. The results obtained agree with the experimental data and other numerical results reported in the literature. It is shown that, contrary to other Lagrangian and adaptive h-remeshing approaches recently reported for this type of problems, the present approach verifies the mass conservation principle with very low relative errors (less than 1% in all ALE examples and exactly in the pure Lagrangian examples). Moreover, thanks to the use of an ALE formulation and in contrast with other simulations, the presented density distributions do not present spurious oscillations. Received: 20 March 2002 / Accepted: 15 October 2002 The partial financial support of the Ministerio de Ciencia y Tecnología (grant number DPI 2001-2204) is gratefully acknowledged.     

铜镍锰钴应变电阻合金的研究

为解决我国箔式应变计引进生产线用箔材国产化的问题，本所自行设计研制了一种新型的温度自补偿铜镍锰钴合金。该合金具有良好的性能复现性和工艺稳定性，制片后的各项性能十分优异，特别是其平均热输出系数Ｃｔ和对试件材料的适应性明显优于进口箔，是制造高精度箔式应变计的理想材料。     

NiTi形状记忆合金基本驱动特性

研究了预应变ＮｉＴｉ形状记忆合金的基本驱动特性，结果表明，加热和冷却过程回复力存在滞后行为；卸载过程中应力与应变具有与加热、冷却过程相关的非线性关系；卸尖力随卸载应变速率增加而降低，此外研究了预应变ＮｉＴｉ合金丝产生回复力后对外应力的响应行为。