基于十二烷基衣康酸甘油酯的光电双响应传感器

该文制备了一种利用结构色水凝胶作为导电电极的光电双响应传感器。以十二烷基衣康酸甘油酯(DGI)、丙烯酰胺、十二烷基硫酸钠(SDS)、氯化钠等为原料,通过双分子层自组装的方法,制备了结构色水凝胶。将这种结构色水凝胶与传统电容型传感器相结合,得到了光电双响应传感器。采用SEM、LCR数字电桥、拉力试验机、光纤光谱仪等对器件进行了结构、光学、电学及机械性能的表征。结果表明:传感器在拉伸状态(0～100%)和压缩状态(0～60.9k Pa)下,传感器的电容分别变化了31%和44%,其自身颜色在可见光光谱内可以动态可逆地从红色变化到紫色。经历15000次循环拉伸后,传感器性能依旧保持稳定。利用传感器颜色的刺激响应性,传感器在发生形变时,其表面可以清楚地显示出应变源的位置和形状,这样传感器在检测时就可以实现可视化效果。     

Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

结合形态学的结构化车道线快速识别算法

为解决结构化车道线识别算法中存在的约束条件多,计算过于复杂等问题,提出一种基于形态学的车道线快速识别算法. 该算法首先对道路图像进行中值滤波,Sobel算子增强边缘,利用直方图特征分割图像,然后划分感兴趣区域,接着构造具有车道特征的形态学结构元素去提取车道线,最后概率霍夫变换拟合车道线. 实验对比结果表明,针对结构化道路,该算法简单有效,计算量小,具有良好的实时性.     

The Effect of Moisture Content in Epoxy Film Adhesives on their Performance. III: Bulk Properties

Humidity absorbed by epoxy film adhesives during low temperature storage or exposure to atmosphere may result in reversible changes and irreversible modifications. Vacuum treatment may partially remedy the reversible changes. The consequences of vacuum drying are manifested in enhancement of both the peel and shear properties of bonded joints (Part I and Part II of this series of papers) and the thermal, physical and mechanical properties of the bulk adhesive, characterized in the present study.

Experimental results have shown that the bulk properties of structural epoxy based adhesives are highly correlated with the aging processes caused by water absorption in the prepolymerized adhesive. Applying the vacuum process is harmful to fresh unaged adhesive due to devolatization of low molecular species of the film adhesive.

The characterization of bulk properties for the purpose of following the aging and recovery processes is advantageous, since the bulk is independent of geometrical and interfacial effects which dominate in the case of property evaluation of the adhesive in a bonded joint.     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

建筑结构粘结剂的研究进展

在综合分析国内外文献的基础上,本文简述了粘结剂的发展历史,它在建筑业中的应用现状及在现代建筑业中的地位;研究了建筑结构粘结剂的主要性能指标,粘结剂连接的优点和主要技术检验指标等.此外,对目前广受关注的粘结剂耐久性研究的试验方法做了总结,列举了最新研究进展.在此基础上,指出了目前研究的不足,提出了对研究方向的建议.     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

Application of structural curvature of coalbed floor on CBM development in the Zaoyuan block of the southern Qinshui Basin

Based on controls of structural style and the position in coalbed methane(CBM)development,we used a method of curvatures to study its relations with CBM development parameters.We calculated structural curvatures of contours of the No.3coal seam floor of the Shanxi Formation in the Zaoyuan block of the Qinshui Basin and analyzed its relations with development parameters of coalbed methane wells.The results show that structural curvature is negatively related to coal reservoir pressure,while positively related to permeability.With an increase in structural curvature,the average production of coalbed methane wells increases at first and then decreases,reaching the highest production at 0.02 m-1 of structural curvature.Therefore,structural curvature can be an important index for potential evaluation of coalbed methane development and provide a basis for siting coalbed methane wells.     

考虑品牌影响的建筑企业顾客满意度模型

根据建筑施工项目的特征提出一个考虑品牌影响的建筑施工企业顾客满意度理论模型。在收集建筑施工企业顾客样本数据的基础上,利用结构方程模型软件对理论模型作了检验。研究结果表明：企业品牌对顾客满意度和顾客忠诚度均具有显著性影响;顾客感知质量对顾客满意度、顾客感知价值对顾客忠诚度、顾客期望对顾客抱怨、顾客满意度对顾客忠诚度具有显著性的影响;顾客期望对顾客抱怨、顾客满意度对顾客忠诚度有正面影响。研究结论具有较高的精度,模型对目标建筑施工企业顾客满意度和忠诚度有较好的解释力。     

结构钢缺口板断裂试验及数值分析

通过对25个结构钢缺口板进行的单向拉伸断裂试验,验证了提出的结构钢广义屈服模型和椭球面断裂准则.用ANSYS软件中的参数化设计语言APDL和用户编程功能UPFs,将提出的静水应力型广义屈服模型编制成子程序模块,对结构钢缺口板断裂试验进行了基于广义屈服模型和椭球面断裂准则的数值模拟分析.试验结果表明:裂纹起始于缺口边缘内侧,裂纹在厚度方向贯通后沿宽度发展,试件最终断裂于缺口薄弱断面.缺口板断裂应力场分析表明,提出的椭球面断裂准则对预测结构钢缺口板初始开裂具有广泛适用性和较高精度.