东营凹陷滚动勘探开发技术研究与应用

东营凹陷已进入勘探开发成熟期 ,滚动勘探开发是增储稳产的主要手段 ,精细油藏描述是其关键。总结滚动勘探开发的 4种方式 (老区扩边、发现新块、发现新层系和新区滚动勘探开发 ) ,对断块复杂程度提出按每平方千米内所有断层的累加长度划分的新方法 ,从构造描述、储集层描述和油藏描述方面介绍了滚动勘探开发的技术方法。以永 8断块为例 ,在层位标定、反射特征分析、构造描述流程、地震地质分析等方面进行深入分析 ,归纳精细油藏描述的具体方法 ,强调了三维地震数据体的相干分析、属性分析等技术的重要作用。应用这一滚动勘探开发技术 ,使东营凹陷每年新增滚动储量近2 0 0 0× 10 4 t。图 3参 10     

Vibrations of stretched damped beams under non-ideal boundary conditions

A simply supported damped Euler-Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deflections and moments. Approximate analytical solution of the problem is found using the method of multiple scales, a perturbation technique.     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

FODA — the formal specification of ODA document structures and its use as a basis for conformance testing

The Office Document Architecture (ODA) is an International Standard which is developed by TC 97/sc 18 of the International Organization for Standardization (ISO) in close collaboration with CCITT's Study Group VIII and with ECMA. This paper describes the current state of a formal specification of the ODA document structures by mathematical means and its use for conformance specification and conformance testing.     

可控环量船用翼的数值模拟和试验研究

本文提出一种可控环量船用翼数值模拟方法,其计算结果与最近Mclachlan的试验数据十分吻合。通过本文的计算,对广泛引用的Kind ＆ Maull的二维试验数据提出了修正。根据本文所作的三维可控环量帆翼的试验结果,与二维计算值的比较,指出它们之间所存在的显著差别。     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

岩性圈闭储层描述技术及应用

本文以高分辨率地震资料为基础，应用测井、钻井等资料，从沉积微相分析入手，建立了以河道砂体、河口坝砂体为主的地质及地震响应模型，并根据地震反射波组特征、地震反演的阻抗值及其他地震属性参数，确定了研究区的砂体变化及其分布规律，总结出一套针对薄互层特点的岩性圈闭识别技术。本文方法在大庆长垣以西古龙和他拉哈西地区的实际应用中取得了明显的效果。     

Simulation of macroscopic material behavior for uniaxial fiber-matrix composites, using a DAE-approach

The macroscopic deformation behavior of a fiber-reinforced aluminum-boron composite is investigated. Different periodic and random arrangements of the microstructure are considered with macroscopic hardening behavior due to the evolution of plastic zones on the microscale being taken into account.

For the solution of the initial boundary value problem, a non-standard algorithm is applied. It consists of the direct solution of the whole set of equations, treating all variables as global quantities. Together with a higher order time integration method (BDF2), an automatic step size control is used in the FEM calculations.