ZrO2 和Al2O3支撑的MFI 型沸石分子筛膜:支撑体材料对膜性能的影响

采用水热合成法，以纯SiO2为源物质，在介孔Y2O3掺杂的ZrO2(YZ)及大孔α-Al2O3支撑体上制备出高质量的MFI型沸石分子筛膜，通过H2／n-C4H10气体混合物的渗透分离和p-xylene的蒸发研究了不同支撑体上MFI型沸石分子筛膜分离性能，在较低温度范围，YZ支撑的MFI型沸石分子筛膜中n-C4H10的渗透率比Al2O3支撑的膜高很多，最大n-C4H10与H2的分离率达到500，Al2O3支撑的膜中py-xylene的蒸发流量随时间下降很快，而YZ支撑的膜中的蒸发流量则变化缓慢，用XRD对膜的晶体结构进行分析，通过多种温度下热处理不同支撑体上的膜样品研究了其热稳定性与支持体材料的关系，YZ支撑的MFI型沸石分子筛膜的MFI结构在1000摄氏度后仍能保持，而Al2O3支撑的膜950摄氏度时已完全转变为石英相，研究结果表明，YZ支撑的MFI型沸石分子筛膜比Al2O3支撑的膜表现出更好的厌不性，热稳定性以及抗阻塞性。     

电子陶瓷材料在多芯片组件(MCM)中的应用

论述了电子陶瓷在多芯片组件（MCM）中的应用、性能要求及优点。重，最叙述低温共烧陶瓷基板技术以及A1N陶瓷基板材料的合成与优异性能。     

Si(111)上生长LiNbO_3薄膜的研究

利用射频磁控溅射的方法,在Si(111)衬底上制备了LiNbO3薄膜。采用X射线衍射(XRD)和扫描电子显微镜(SEM)研究了衬底温度、退火温度和溅射气体压强对LiNbO3薄膜结晶和表面形貌的影响,并用椭圆偏振仪测量了薄膜的厚度和折射率。结果表明:衬底温度为450℃时制备的薄膜,退火前后都没有LiNbO3相生成;衬底温度为500～600℃时,LiNbO3薄膜出现(012)、(104)和(116)面衍射峰,经600℃退火后3个衍射峰的强度加强;衬底温度为600℃时,经600～900℃退火得到的LiNbO3薄膜,除出现(012)、(104)和(116)面衍射峰外,还出现(006)面衍射峰;溅射气体压强从0.8 Pa增大到2.4 Pa时,经800℃退火后得到的LiNbO3薄膜表面晶粒团簇变小,而0.8 Pa制备的薄膜经800℃退火后LiNbO3相的结晶程度较其它压强下完善;900℃退火后得到的LiNbO3薄膜折射率为2.25,与LiNbO3晶体相当。     

硅基底上制备纳米镍粒子

采用微波加热法在单晶硅基底上制备纳米镍粒子。考察了镍源、还原剂、表面活性剂、加热方式等实验条件对单晶硅基底上制备纳米镍粒子的影响。对硅基底上纳米镍粒子的成分、结构及表面形态进行了表征。结果表明:以水合肼为还原剂、氯化镍为镍源,微波加热3 min在硅基底上可以制备出直径为30 nm的均匀单一分布的纳米镍粒子。     

Formation mechanism of subtrenches on cone-shaped patterned sapphire substrate

In this paper, the cone-shaped patterned sapphire substrates (PSS) were etched by an inductively couple plasma with BCl 3 as the reacting gas. The influence of the operating pressure and the RF bias power on subtrenches of the cone-shaped PSS and the formation mechanism of subtrenches were investigated. The profiles of patterns were characterized by FESEM (field emission scanning electron microscope). It showed that the subtrench size varied with the operating pressure and the RF bias power. As the operatin...     

ZnO一维纳米结构在金属基底上的原位生长和表征

以Cu—Zn合金片为基底并提供Zn源,在含氧气氛中通过调控反应温度和氧偏压,采用热氧化法直接在Cu-Zn合金片上大面积可控地合成了多种形貌的ZnO一雏纳米材料薄膜（包括纳米带、纳米片、纳米梳和纳米线等）,采用多种分析方法对产物的形貌、结构进行了详细的表征,并对其相应的生长模型进行了讨论。结果表明,反应温度和氧偏压对ZnO纳米结构的生长至关重要,随着反应温度升高或氧含量的减少,气相Zn／O物种的偏压比增加,ZnO纳米结构尺寸变小。     

Hydroformylation of functional alkenes with heterodonor phosphine rhodium catalysts: substrate or ligand directed regioselectivity?

The catalytic activity and selectivity of heterodonor phosphine rhodium catalysts prepared in situ were tested in the hydroformylation of functional alkenes (ethyl acrylate, methyl methacrylate, styrene, 4-vinyl-1-cyclohexene, dicyclopentadiene and cis-1,2,3,6-tetrahydrophthalic anhydride). Systematic variation of the heterodonor atom in the ortho position of the ligand showed that the heterodonor atom has a significant influence on the activities and selectivities of the reaction. However, the activity seems to depend mainly on the modifying ligand, and the regioselectivity mainly on the substrate (i.e., the structure and functionality of the alkene). Nevertheless, regioselective control is only obtained through synergy between the substrate and the catalyst. Clear regiocontrol was observed in the hydroformylation of ,-unsaturated esters and styrene with an in situ formed o-(thiomethylphenyl)diphenylphosphine rhodium catalyst.     

MABP: an optimal resource allocation approach in data center networks

In data center networks, resource allocation based on workload is an effective way to allocate the infrastructure resources to diverse cloud applications and satisfy the quality of service for the users, which refers to mapping a large number of workloads provided by cloud users/tenants to substrate network provided by cloud providers. Although the existing heuristic approaches are able to find a feasible solution, the quality of the solution is not guaranteed. Concerning this issue, based on the minimum mapping cost, this paper solves the resource allocation problem by modeling it as a distributed constraint optimization problem. Then an efficient approach is proposed to solve the resource allocation problem, aiming to find a feasible solution and ensuring the optimality of the solution. Finally, theoretical analysis and extensive experiments have demonstrated the effectiveness and efficiency of our proposed approach.     

用工农业废料配制的两种堆肥培育观赏植物

由工农业废料配制的两种堆肥作为试验用的基质:C1——酿造啤酒等废料(酵母和麦芽)加修剪下的柠檬树枝;C2——橄榄研磨厂废水的固体级分加橄榄树叶。以每种堆肥与泥炭藓泥炭或商品基质(CS)按不同的比例混合,可配制成16种基质。尽管基质的物理和理化特性例如总孔隙度和电导率(EC)都是合适的,但由堆肥提供的养分(氮和钾)释放缓慢,对金盏花发育的影响尤为明显。另一方面,由于对盐分含量敏感,EC和氯化物浓度是影响蒲包草生长的主要因素。为供金盏花发育的适宜的基质可以通过含量高达75?与泥炭或高达50?与CS混合,以及高达50?与泥炭或CS混合使用。对蒲包花来说,基质中堆肥比例应较低,可用50?与泥炭或CS混合,也可以用25?与泥炭或CS混合使用。因此,只要基质至少含有25%的泥炭或CS,源于工农业废料的堆肥可作为培育观赏植物的泥炭和CS的替代品。