BaTiO3基Au纳米颗粒复合薄膜的制备及其光学性质研究

采用溶胶-凝胶（sol-gel）方法，成功的将高体积面分比的Au纳米颗粒复合到BaTiO3的非晶薄膜中，并对其光学性质进行了研究。用XRD、TEM、椭偏仪、吸收光谱、光克尔效应OKE（Optical Kerr Effcet）方法对薄膜进行了表征和测试。从吸收光谱观察到表面等离子体共振SPR（Surface Plasma Resonance)峰随热处理温度升高而红移的现象。光学非线性测试表明薄膜具有高的三阶非线性极化率Χ^(3)和超快的响应时间。     

Effect of Strain Rate on Discontinuous Flow and Mechanical Characteristics of High-Nitrogenous Steel

Experimental study on the effect of strain rate on discontinuous flow and mechanical characteristics of the high-nitrogenous steel Kh23AG19F has been performed. Within the range of strain rates from 4.62 · 10^-5 to 1.85 · 10 ^-4 s^-1, discontinuous flow, reflected by serration on the tensile diagram, is chiefly determined by intergranular deformation mechanisms. Under strain rates over 1.85 · 10^-2 s^-1, combined deformation modes prevail, which cause a change in the character of discontinuous flow and transform a serrated tensile diagram into a wavy graph, with the yield stress of steel increased significantly.     

改性沥青新型磨耗层在高等级路面上的应用

从材料、适用范围、形成机理、经济分析、施工工艺五个方面，介绍了改性沥青新型磨耗层在高等级路面上的应用，并通过试验路的观察表明，改性沥青新型磨耗层具有快速排水、增加摩阻力、愈合原路面微裂缝和较强抗磨耗的功能，是处置高等级路面上常有的龟裂、网裂、脱皮、露骨、抗磨系数不足、渗水等病害较具推广价值的新型施工工艺。     

不同级配对微表处混和料性能的影响

微表处技术是一种性能优良的路面养护技术。首先检验了微表处用原材料的技术指标,在满足规范的要求下选择了三种不同级配,并对三种不同级配的微表处混和料的使用性能进行了比较。     

Effect of select parameters on the properties of edible film from water-soluble fish proteins in surimi wash-water

Edible film from water-soluble fish proteins were developed by casting film solution on leveled trays and effects of pH (9.5, 10.0 and 10.5), heating temperature (60, 70 and 80 °C), and heating time (10, 20 and 30 min) of the film solution on various film properties were determined using Response Surface Methodology (RSM). The impact of pH and heating temperature of film solution was more significant, overall, on the film's properties than heating time. Contour plots of tensile strength and elongation at break was highest at pH of 10.0 at 70 °C (2.75-3.02 MPa) but low in elongation at break (6.35-9.16%), while water vapor permeability and oxygen permeability were at their lowest (58.55-65.96 g mm/m² d kPa and 351.33-624.18 cm³ μm/m² d kPa). There was a direct correlation between the films’ and proteins’ solubility on one hand, and heating temperature of film solution on the other, which reversed with change in pH of film solution. Film color was darker and more yellowish with increase in the pH of film solution.     

油气储层敏感性伤害机理识别方法及应用实例

从油气储层岩石学分析入手,阐述了砂岩储层4类敏感性发生的原因及作用机理,结合几个实例,论述了油气开发实践中,必须针对砂岩储层的非均质性特点,对症下药,在充分掌握储层伤害机理的基础上,研制保护与改造油气层的措施,才能取得实效。本文的研究方法可为陆相复式油气区同类砂岩储集层的勘探、开发提供借鉴。     

新型高K栅介质ZrO2薄膜材料的制备及表征

采用超高真空电子束蒸发法制备了新型高 K栅介质-非晶 ZrO2薄膜. X射线光电子能谱 (XPS) 中 Zr3d5/2 和 Zr3d3/2 对应的结合能分别为 182.1eV和 184.3eV, Zr元素的主要存在形式为 Zr4+,说明薄膜由完全氧化的 ZrO2组成 ,并且纵向分布均一.扩展电阻法( SRP)显示 ZrO2薄膜的 电阻率在 108Ω@ cm以上,通过高分辨率透射电镜( HR- XTEM)可以观察 ZrO2/Si界面陡直,没有 界面反应产物 ,证明 600℃快速退火后 ZrO2薄膜是非晶结构.原子力显微镜( AFM)表征了薄膜的 表面粗糙度,所有样品表面都很平整,其中 600℃快速退火样品 (RTA)的 RMS为 0.480nm.     

MEG钻井液在吐哈油田小井眼侧钻井中的应用

吐哈油田小井眼开窗侧钻井主要采用混原油钻井液,不利于环境保护。从研究MEG单体的作用机理入手,以钻井液润滑性、抑制防塌性为主要评价指标,对MEG钻井液配方进行了优选,并对优选配方钻井液性能进行了评价。该钻井液在4口小井眼开窗侧钻井进行了试验应用。结果表明:应用井无阻、卡现象,平均钻井周期缩短了7.2d;在未混原油的情况下钻井液润滑系数比乳化原油(15%~20%)钻井液降低了34.6%;油层保护效果好,其中温5-41C井日产油14.4t,同比温五区块平均产量提高了128.4%,神218C井是神229区块目前唯一的自喷井。表明优选出的MEG钻井液具有优良的润滑性、抑制防塌性及良好的储层保护效果,特别适合强水敏地层及大斜度井和水平井等特殊复杂工艺井的钻进。     

润滑油用纳米TiO2的表面改性及自修复性能研究

采用油酸对纳米TiO2进行表面改性，使其稳定分散于基础油中。利用HQ-1摩擦磨损试验机考察纳米TiO2的自修复性能，并探讨其自修复机理。试验结果表明，经改性后的纳米TiO2粉体作为润滑添加剂具有良好的分散稳定性、减摩抗磨性和自修复性。     

Progressive damage modelling of SMC composite materials

The present work deals with the modelling of damage behaviour for sheet moulding compound (SMC) composite materials using a finite element analysis package. Specifically, a comparison is made between the results obtained experimentally for a three-point bending test, and those obtained from numerical simulation using a material model already implemented. The simulation has been performed for the material models available within the PAM-CRASH software. The simulation results are compared and validated with respect to experimentation.