DTS中基于用户自定义的自动装置模拟

在调度员培训仿真器（DTS）中传统的自动装置仿真方法是对不同类型的装置分别建模，其缺点是适应性差、扩展性不强。针对这些问题，对自动装置的动作原理进行分析，建立了1个基于用户自定义的自动装置仿真模型。该模型将自动装置抽象为启动元件、信息综合分析单元及联动元件三部分，实现对不同自动装置的统一处理。其信息综合分析单元采用带自定义符号元素和语法规则的逻辑表达式实现，用特定的表达式解析器进行解析，完成对启动信号的综合分析与判断。在天津DTS的实际应用表明，该模型具有较好的通用性、灵活性和可扩展性。     

Methods for electronic 3-D moving pictures without glasses

Approaches are described for image acquisition and playback for 3-D computer graphics, 3-D television and 3-D theatre movies without special glasses. Projection lamps, spatial light modulators, CRTs and dynamic scanning are all eliminated by the application of an active image array, all static components and a semispecular screen. The resulting picture shows horizontal parallax with a wide horizontal view field (up to 360°), giving a holographic appearance in full colour with smooth, continuous viewing without speckle. Static component systems are compared with dynamic component systems using both linear and circular arrays. Computer graphic systems are shown, which allow complex shaded colour images to extend from the viewer's eyes to infinity. Large screen systems visible by hundreds of people are feasible by the use of low f-stops and high-gain screens in projecttion. Screen geometries and special screen properties are shown.     

集成WAP与SMS的家庭网系统

文中提出一种家庭网系统(HNS)结构，它集成了WAP协议与短信服务，支持家庭网与Internet／GSM间的连接。整个系统包括HNS网关和三个家庭网子系统(家具子系统、安全子系统和消息子系统)，其主要目标是通过便携电脑或GSM移动终端远程控制和监视家庭设备，除了能对远程查询作出反应外，被管理设备还能在非正常情况下主动向移动终端发送警报消息，通过HNS网关，监视与控制信息能发向Internet／GSM。另外，文中还就系统的实现方法给出了一些实用性建议。     

Effects of a base coating used for electropolymerization of poly(3,4-ethylenedioxythiophene) on indium tin oxide electrode

Electropolymerization of poly(3,4-ethylenedioxythiophene) (PEDOT) films on indium tin oxide (ITO), using a very thin PEDOT:poly(styrene sulfonate) (PEDOT:PSS) film as a base coating, was carried out in a non-aqueous solution containing the monomer, an electrolyte and propylene carbonate by a two-electrode system. For comparison, PEDOT film electrodeposited on bare ITO substrate under the same condition was also presented. The PEDOT films deposited on these two substrates were characterized by scanning electron microscopy, energy disperse X-ray spectroscopy and Raman spectroscopy. The results indicate that the PEDOT film electrodeposited on bare ITO was not uniform, while the PEDOT film electrodeposited on PEDOT:PSS/ITO has better uniformity. The compositions of the different regions of PEDOT film electrodeposited on bare ITO and PEDOT:PSS/ITO were studied and discussed. Electrochromic devices (ECDs) based on PEDOT films electrodeposited on bare ITO and PEDOT:PSS/ITO were fabricated and characterized by UV-Vis-NIR spectrophotometric study. The results show that the display contrast of the ECD based on PEDOT film electrodeposited on PEDOT:PSS/ITO was improved over that on a bare ITO substrate.     

Binuclear aluminum complex as an efficient orange emitter in single-layer electroluminescent devices

A binuclear aluminum complex with a chelating anilido-imine conjugated Schiff base ligand, 1,4-{o-C₆H₄[N(2,6-ⁱPr₂C₆H₃)][CH  N]Al(CH₃)₂}₂C₆H₄ (3), was synthesized from the alkane elimination reaction of trimethylaluminum with the free ligand, 1,4-{o-C₆H₄[NH(2,6-ⁱPr₂C₆H₃)][CH  N]}₂C₆H₄ (2), at room temperature. The photophysical properties of complex 3 were briefly examined and it was found that complex 3 displays bright orange luminescence in solution and in solid state. Electroluminescent devices were fabricated by doping complex 3 in polymer blend host of poly(vinylcarbazole) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazol using simple solution spin-coating technique. Efficient orange light emission was obtained from the fabricated single-layer organic light-emitting devices with a maximum current efficiency of 3.2 cd/A.     

Editable Supercapacitors with Customizable Stretchability Based on Mechanically Strengthened Ultralong MnO2 Nanowire Composite

Although some progress has been made on stretchable supercapacitors, traditional stretchable supercapacitors fabricated by predesigning structured electrodes for device assembling still lack the device‐level editability and programmability. To adapt to wearable electronics with arbitrary configurations, it is highly desirable to develop editable supercapacitors that can be directly transferred into desirable shapes and stretchability. In this work, editable supercapacitors for customizable shapes and stretchability using electrodes based on mechanically strengthened ultralong MnO₂ nanowire composites are developed. A supercapacitor edited with honeycomb‐like structure shows a specific capacitance of 227.2 mF cm^?2 and can be stretched up to 500% without degradation of electrochemical performance, which is superior to most of the state‐of‐the‐art stretchable supercapacitors. In addition, it maintains nearly 98% of the initial capacitance after 10 000 stretch‐and‐release cycles under 400% tensile strain. As a representative of concept for system integration, the editable supercapacitors are integrated with a strain sensor, and the system exhibits a stable sensing performance even under arm swing. Being highly stretchable, easily programmable, as well as connectable in series and parallel, an editable supercapacitor with customizable stretchability is promising to produce stylish energy storage devices to power various portable, stretchable, and wearable devices.     

移动会务通系统的设计与实现

随着通信技术和移动终端的发展,会务通系统通过短信、彩信、WAP等移动信息技术,完成对会议过程的服务与管理。介绍了移动会务通系统的组网结构、系统框架、功能模块,并给出了系统的技术实现方法。     

超分辨率重建技术及其在太赫兹图像中的应用

超分辨率重建就是通过相应的算法,重建图像截止频率之外的细节信息,重构出一幅清晰的高分辨率图像。首先介绍了超分辨率重建算法——非均匀内差法,迭代反投影法（IBP）,凸集投影法（POCS）,说明了各算法的概念和应用,并着重介绍了基于最大后验概率（MAP）的图像超分辨率算法,给出了MAP超分辨率复原算法处理实际太赫兹图像的结果。实验表明,超分辨率图像重建具有重建效果好、抗噪声性能强的优点,有效地重建了高分辨率太赫兹图像,在太赫兹成像领域具有良好发展和应用前景。     

基于ATR技术的有机聚合物二次电光系数的测量

二次电光效应是有机聚合物材料一种重要的电光特性,利用这种特性可以制备有机聚合物电光调制器等电光器件.有机聚合物材料的二次电光系数是衡量其二次电光效应的一个重要参数,其可以用一个6×6阶的张量来表示.利用该张量的对称特性、各个元素之间的已知关系以及折射率椭球公式,本文提出了一种基于衰减全反射(ATR)技术的测量有机聚合物二次电光系数的方法.在测量中,通过选用TM偏振光以及TE偏振光作为测量光束,可以分别获得二次电光系数张量中S11以及S12元素.利用已知关系,可以计算得到S44以及直流克尔系数.从而得到二电光系数张量中所有元素的值.     

A Review of Microfluidic Experimental Designs for Nanoparticle Synthesis

Microfluidics is defined as emerging science and technology based on precisely manipulating fluids through miniaturized devices with micro-scale channels and chambers. Such microfluidic systems can be used for numerous applications, including reactions, separations, or detection of various compounds. Therefore, due to their potential as microreactors, a particular research focus was noted in exploring various microchannel configurations for on-chip chemical syntheses of materials with tailored properties. Given the significant number of studies in the field, this paper aims to review the recently developed microfluidic devices based on their geometry particularities, starting from a brief presentation of nanoparticle synthesis and mixing within microchannels, further moving to a more detailed discussion of different chip configurations with potential use in nanomaterial fabrication.