GLOBAL: A Design for Random Testability Algorithm

1MotivationsIncreasingdensityofVLSIchipsmakesthecostoftestingveryexpensive.Designfortestabilitycantemperthisproblemdrastically.Therearetwokindsofsolutions:(i)localsolutionl3'2]withlowcomputingcomplexity,whichcannotalwaysgetsatisfactoryresults;(ii)globa.lsolutionwithprohibitivecomputingcomplekityl1'5].T.H.Chen'andM.A.Breuer[1lpresentedanILPmodeltoplacetestpointsglobally.Becauseofitscomputingcomplealty,[1lcanonlydealwithsmallormediumscalecircuits.SCOAPisusedin[1],whichisnotaveryaccuratet…     

电动自行车充电器自动检测系统设计

介绍了基于PC虚拟仪器和VB环境的电动自行车充电器自动检测系统，阐述了系统检测原理，硬件结构设计及应用软件的编制方法，文中还给出了一个实用的恒流放电电子负载电路。     

85W／90卡车手动变速箱油的研制

介绍８５Ｗ／９０卡车手动变速箱油的组分和添加剂，提出符合８５Ｗ／９０粘度级别的基础油，讨论影响８５Ｗ／９０卡车手动变速箱油性能的各种因素，给出符合８５Ｗ／９０卡车手动变速箱油规格的油品配方。     

一种无线电引信杆试验升降装置

针对目前广泛使用的无线电引信杆试验升降装置的不足，提供一种先进、简单、实用的升降装置，此装置主要由一体化减速、制动电机和控制电路组成，具有体积小、可靠性高、成本低廉等优点，是解决无线电引信杆试验测试弹升降问题的较好方案。     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

汽车自动传动液的研制

介绍了自动传统液的分类规格、自动传动液的特性和相关的评定方法；研制了无锌和低锌配方的两种产品，经评定试验和实机使用，符合ＤｅｘｒｏｎⅡＤ、Ｍｅｒｃｏｎ和ＡｌｌｉｓｏｎＣ－４的规格要求，达到了国外同类产品的质量水平。     

气体绝缘封闭电器的高速瞬变过程和现场试验

随着ＧＩＳ的工作电压不断提高和发展，一系列新的现象和问题也同时出现。从国外一些科研，设计，制造部门所研究发表的内容看，大致有隔离开关操作和高速瞬变过程，粒子影响和对干扰定位的技术，元件的监督，现场试验等课题，本文对以上问题加以综合介绍。     

核电厂操作人员心理特质的定量研究

在介绍前苏联Ｐｒｏｇｎｏｚ心理研究所和我国台湾省我国内外有关心理特质定量测试研究基础上，介绍了对我国核电厂操作人员运用美国明尼苏达多项个性测试（ＭＭＰ）进行心理特质分析的初步结果，提出了开展我国核电厂操作人员心理物质研究了主要内容，并强调了进行核电厂操作人员心理物质选拔和心理培训的必要性。