The chloride stress-corrosion cracking behavior of stainless steels under different test methods

Chloride-induced stress-corrosion cracking (SCC) is one of the failure modes of stainless steels. Highly alloyed austenitic stainless steels S32654, S31254, and N08028, and duplex grades S32750 and S31803 possess much improved resistance to SCC compared with S30400 and S31600 steels. With the development of a database, SSData, experimental data collected from calcium chloride tests, autoclave tests, and drop evaporation tests were evaluated. Stress-corrosion cracking data generated by autoclave tests agreed well with the practical service conditions and can be used to discriminate alloys for SCC resistance in sodium chloride solution. Drop evaporation test data can be used in situations where evaporation may occur and cyclic loading may be involved. The SCC resistance of alloys under each method increased with increasing molybdenum equivalent Mo + 0.25Cr + 0.1Ni. For a given alloy, the testing result depends on the stress state and environment; different test methods can give different ranking orders concerning SCC resistance. The performance of duplex stainless steels in a chloride-containing environment at higher temperatures was not as good as expected when dynamic loading was involved.     

特超稠油污水回掺降粘集输工艺

通过对河南古城油田BQ10区特超稠油乳状液的室内试验分析,指出该种乳状液的实际相突变点为68%左右,当相浓度Φ≥68%时,以W/O型为主的乳状液突变为以O/W型为主的乳状液.乳状液变型后,原油与管道内壁之间的摩擦以及原油之间的摩擦转变为水与管道内壁及水与水之间的摩擦,从而大幅度降低其粘度和摩阻损失;通过对古城BQ10区特超稠油区块单元内部污水回掺降粘集输的现场试验,证明与室内试验分析得出的结论相符合,说明区块单元污水回掺不同于常规的掺热水,也不同于掺联合站处理过的净化污水,它优于单井掺稀油.最后指出该工艺可有效地降低井站回压,方便生产管理,降低开采成本,提高采油效率和经济效益,具有低耗节能的优点.     

电力变压器局放超声传感器及其应用

作者研制成一种带光纤的电力变压器局放超声PZT传感器.文中分析了它的灵敏度与宽频带特性,介绍了原理、结构设计、实验数据及现场成功实例.理论与实验研究表明:具有这种高灵敏传感器的超声定位系统是确定电力变压器绝缘故障部位的一种方法.     

On the Yustova threshold plates

A response to criticism of threshold plates for the study of color vision developed at the Mendeleev All-Russia Research Institute of Metrology and published in 1994 is presented. The critics base their conclusions on colorimetric testing and the examination of the plates. In response to the article by M. V. Danilova and J. D. Mollon [4]. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 37–39, January, 2007.     

低浓度CO合成甲酸甲酯中试研究

进行了低浓度CO合成甲酸甲酯的中试研究,探讨了温度、压力、流速、催化剂浓度等因素对反应的影响,在优化条件下考察了系统的稳定性。结果表明,低浓度CO(体积分数15%)合成甲酸甲酯CO的单程转化率达到50%以上,粗品中甲酸甲酯含量达到7%～9%,可以满足工业浓缩要求,且整个合成系统未发生母液堵塞的问题,与高浓度CO羰基合成甲酸甲酯相比,单位生产成本可降低30%,具有良好的技术先进性。     

用双向扭转圆柱组合螺旋弹簧实现扭矩测试

利用单个圆柱螺旋扭转弹簧扭转原理,给出了一种用双向扭转圆柱组合螺旋弹簧实现扭矩测试的方法。根据扭转弹簧模型,给出了预紧力、加载的证明,并对实验结果进行分析;该结构用于扭矩测试系统既实用可靠,又简单易加工;降低了测试系统的成本,具有很高的实用价值。     

一种新型微处理器功能验证

文中介绍一种新型微处理器的验证方法，并对相关的一些验证策略进行深入的讨论。     

磁悬浮硬盘转子控制系统中时序电路测试技术

为提高磁悬浮硬盘转子控制系统的可靠性，提出了对时序芯片的测试方法：手工测试和计算机辅助测试；及时时序电路逻辑功能的两种检测技术；基于状态表的测试技术和自动检测技术。对于时序芯片，手工测试方法效率较低，计算机辅助测试方法适用范围更广；对于电路逻辑功能，基于状态表的测试技术操作相对困难，但无须增加额外测试电路；自动检测技术操作简单，且测试速度快，但需要增加辅助检测电路。时序电路测试技术对保证悬浮硬盘转子各组成部分协同工作十分重要。     

一种低频 空间定向及高灵敏遥感方法研究

本文提出一种低频、空间定向及高灵敏的遥感方法。文中介绍了传感器及其二次仪表设计原理和关键技术。由作者研制的本检测系统,在空气中的定向接收灵敏度,离1米处高达120mV/μPa,比HP4905A型机的输出信噪比高8倍.     

From the individual element test to finite element templates: Evolution of the patch test

This paper starts a sequence of three articles that follow an unconventional approach in finite element research. The ultimate objective is to construct high-performance elements and element-level error estimators for those elements. The approach takes off from our previous work in high-performance elements and culminates with the development of finite element templates. The present paper concentrates on the patch test and evolved versions of the test that have played a key role in this research. Following a brief review of the historical roots, we present the Individual Element Test (IET) of Bergan and Hanssen in an expanded context that encompasses several important classes of new elements. The relationship of the IET to the multielement forms A, B and C of the patch test and to the single-element test are investigated. An important consequence of the IET application is that the element stiffness equations decompose naturally into basic and higher-order parts. The application of this decomposition to the “sanitization” of the non-convergent BCIZ element is described and verified with numerical experiments. Two sequel papers in preparation are subtitled ‘the algebraic approach’ and ‘element-level error estimation’. These apply the fundamental decomposition to the derivation of templates for specific mechanical elements and to the construction of element-level error estimators, respectively.