从头算法对甲基磺酸拉曼光谱振动频率指认

对液态的甲基磺酸进行了拉曼光谱测定。采取从头算法用各种不同的基组 (最大的基组为MP2 / 6 -311+G( 2d ,2 p) )对甲基磺酸的结构和光谱进行了计算 ,得到了甲基磺酸的结构参数及稳定构象信息。采用一个具有Ci 对称的二聚体模型解释了甲基磺酸的液态光谱。对单体和二聚体的甲基磺酸进行了简正坐标计算 ,结果表明二聚体结构是液态甲基磺酸聚积态分子的合理模型。     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

Allelopathic effects of giant foxtail on germination and radicle elongation of loblolly pine seed

Water extracts of giant foxtail grass inhibited germination and radicle elongation of loblolly pine seed in a laboratory test. Most of the toxic effects came from extracts of dried foxtail tops, with lesser amounts from fresh tops and roots. Soil texture affected the phytotoxicity of the extracts. Eight chemical compounds known to be phytotoxins inSetaria were identified in extracts of foxtail leaves but could not be found in soil samples under the leaves.     

提高储层预测精度技术思路与对策

采用地质、地震、测井人员协同一体化作业，对地下地质目标进行综合预测与评价，可提高储层预测精度，降低预测结果的多解性。主要方法是针对不同的区块，采用不同的方法和对策，首先从单井储层划分对比入手，建立储层沉积模式，同时对地震数据目的层段进行精细解释，建立地层构造模式，用沉积、构造等地质规律来指导和约束反演；利用测井资料对地震资料进行精细标定，建立各井的单井波阻抗模型，建立井数据和地震数据沟通的桥梁；在严格的测井约束、地质模型约束、层位控制下进行储层反演；充分利用地质、地震反演结果、地震参数提取及分析结果、测井、测试和分析化验等资料对储层预测结果进行综合分析与评价。该方法应用于长庆、大庆、准噶尔等实际区块，取得了较好的效果。     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

舞钢扁钢锭咬边参数的确定

本文根据我公司自产的11.7t及13.34t扁钢锭在4200mm轧机生产过程中,运用正交试验方法,合理应用咬边参数的轧制方案,以此降低金属消耗。此方案使“咬入返回轧制”及“留尾轧制”新技术进一步得到完善,板形更加矩形,使锭一材成材率提高2％左右。     

铜街子工程坝基预裂控制爆破

本文介绍了在复杂地质条件下,通过反复试验、采用预裂爆破技术在玄武岩坝基进行各种坡面角度的全方位、大面积的生产性实践,并对预裂控制爆破提出了一些意见和具体施工方法.     

混合结构楼房爆破拆除倒塌范围的确定

通过对混合结构楼房爆破倾倒过程特点的分析,提出了楼房在倾倒过程中的运动计算模型,并应用体积平衡原理,得到这类楼房爆破爆堆参数计算公式,用该公式计算的结果与实例中爆堆实测数据相比较,相对误差不超过11%.     

The Effect of Stunning Methods on Rigor Mortis and Texture Properties of Atlantic Salmon (Salmo Salar)

Shear force and rigor mortis were used to evaluate the post‐mortem changes of muscle texture in Atlantic salmon (Salmo salar). The fish were either stunned with carbon dioxide (CO₂), electricity, or percussion prior to slaughter. The pre‐mortem stress during CO₂ stunning resulted in an earlier onset and resolution of rigor mortis, and accelerated post‐mortem softening of the muscle tissue as compared to the other stunning methods. No significant differences, either in development of rigor mortis or shear force, were seen between fish that were stunned with electricity or by percussion. Consequently electricity can be used for stunning fish prior to slaughter.     

Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.