启明星1号装置中子通量能谱与中子平均能量计算

启明星1号装置是我国研究ADS次临界中子学的一个快热耦合系统。本文用离散坐标法的程序TWODANT对启明星1号装置能谱进行分析计算。计算结果表明，启明星1号装置具有比较硬的中子能谱，可用以进行有关ADS的研究。     

Analysis of singular stress fields at multi‐material corners under thermal loading

The scaled boundary finite‐element method is extended to the modelling of thermal stresses. The particular solution for the non‐homogeneous term caused by thermal loading is expressed as integrals in the radial direction, which are evaluated analytically for temperature changes varying as power functions of the radial coordinate. When applied to model a multi‐material corner, only the boundary of the problem domain is discretized. The boundary conditions on the straight material interfaces and the side‐faces forming the corner are satisfied analytically without discretization. The stress field is expressed semi‐analytically as a series solution. The stress distribution along the radial direction, including both the real and complex power singularity and the power‐logarithmic singularity, is represented analytically. The stress intensity factors are determined directly from their definitions in stresses. No knowledge on asymptotic expansions is required. Numerical examples are calculated to evaluate the accuracy of the scaled boundary finite‐element method. Copyright © 2005 John Wiley & Sons, Ltd.     

大机组调峰对锅炉运行的影响及运行优化研究

利用炉膛断面温度场可视化监测系统、节能环保车、炉内三维数值模拟等先进的技术和设备对大机组调峰稳定性和运行方式优化进行试验和理论研究。     

Strain rate sensitivity of tensile properties in high Nb containing TiAl alloys

The effect of strain rate on the yield strength of high Nb containing TiAl alloy was studied. The results show that the strain rate sensitivity varies with the test temperature, and the yield strength is not sensitive to the strain rate at room temperature but significantly sensitive to the strain rate at high temperature. An increase of the strain rate or a decrease of the temperature results in an obvious change of fracture mode. It is found that the strain rate sensitivity of this alloy varying with temperature is due to the dislocation climb generated at high temperature.     

钢包用滑板的热应力有限元分析

连铸钢包使用的滑动激光器是控制连铸生产过程的关键设备之一。为了确定501滑板使用中产生裂纹的原因，抑制裂纹形成，提高滑板使用寿命，本文应用有限元法进行了滑板热应力分析，并与生产中使用的滑板比较，有限元分析显示：在滑板材质一定的情况下，滑板形状以及滑板的预紧能力和固定方式是影响滑板使用寿命的基本因素。     

Low Temperature Phase Transition Behavior of Ca-Doped Lanthanum Chromites

Phase transition of LaCrO3 and doped-LaCrO3 was studied by DSC, TG and XRD, and thermal expansion during the transition was analyzed. It is found that phase transition of LaCrO3 begins at about 240℃ and ends at about 265 ℃. Temperatures of phase transition rise obviously with increasing Ca^2＋ content. The transition of LaCrO3 and Ca-doped LaCrO3 from orthorhombic to rhombohedral is accompanied with endothermic reaction. No obvious change occurs in mass, but remarkable shrinkage occurs during phase transition.     

浅析影响SCR法铸坯质量的因素

分析了SCR连铸连轧工艺生产铜银合金导线时,铸坯凝固的热阻界、铸模的传热条件、铸坯组织的控制对产品质量的影响。     

A Study on the Buckling Behaviour of Strips and Plates with Residual Stresses

During and after rolling or flattening of metal strips and plates the permissible deviations from flatness are described by the permissible absolute wave height and the flatness index. Both values can be determined on a measuring table while the material is not subjected to global tension. Because this procedure is expensive, time‐consuming and allows measurement only at discrete positions along the strip length, on‐line flatness measuring systems are used which can detect the distribution of longitudinal tensile stresses distributed across the strip width allowing for the calculation of the flatness index. This value does not always agree with the value obtained directly by measuring on the table even when the measurement of the longitudinal tensile stress distribution operates perfectly. It can be shown that the measurement of the tensile stress distribution does not give a direct indication on the wave height in the tension‐free state determined on the measuring table. To explain the relationship between tensile stress distribution in the strip and the flatness measurement on the measuring table, the buckling behavior is analysed both with and without dead load for simple symmetrical residual stress distributions resulting, e.g., from the rolling process. Based on the knowledge of the distribution of the longitudinal residual stresses across the strip width, the flatness index and the wave height can be determined by using a specialized finite element model. If the direct measurement is performed under action of dead load, large differences between the directly and indirectly obtained flatness index are observed. Below a certain limit of the intensity of the residual stress distribution the strips and plates lie flat on the measuring table. Above this limit the strip lying on the table exhibits post‐bucking deformations. In the latter case, the wave height increases with strip thickness and intensity of residual stresses.     

强流质子RFQ加速腔热特性分析

利用有限元计算软件ANSYS分析了热效应对加速腔共振频率的影响,计算了RFQ腔体与热效应有关的参数,如水冷系统的冷却水温度、热交换系数等。