物探螺旋钻机钻杆液压夹紧机构的设计计算

利用ANSYS大型有限元分析软件,对新设计的物探螺旋钻机钻杆液压夹紧机构进行了数值模拟分析计算。分析计算结果表明,当钻杆液压夹紧机构的钳体材料选择ZG310-570,所用液压马达的排量为390 mL/r时,该系统在最小驱动压力4.82 MPa、最大驱动压力7.30 MPa时才能正常工作。这种数值模拟分析为进一步改善钻杆液压夹紧机构的受力,改进机构的设计提供了依据。     

基于Luv色度坐标图像分割方法的孔洞参数计算

针对成像测井解释中孔洞参数定量计算的准点，提出用基于Luv色度坐标进行图像分割的方法来定量计算孔洞的面积、面孔率等相关参数。采用该方法得到的孔洞结果目标区域完整，可以方便地计算出孔洞面积和面孔率等参数。     

电厂热力系统耗差分析系统实现的研究与发展

总结了电厂热力系统耗差分析几种实现方式，回顾了国内在该领域的发展过程。电厂热力系统耗差分析实现方式分别经历了独立的耗差分析系统、基于DCS的耗差分析系统、基于MIS的耗差分析系统。并在不同的分析方式上进行了评价，指出了耗差分析系统的发展方向。     

集团变分法(CVM)及其在合金相图计算中的应用

介绍了集团变分法的集团概率变量、配置熵等统计分析的理论基础及Helmholtz自由能的描述模型.提出了巨势及相对化学势的几何分析理论.讨论了应用集团变分法和巨势分析理论进行相平衡计算的过程,并分析了同结构平衡相图计算的若干实例.     

Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

阜新市细河改造工程坝基渗漏计算及处理效果分析

阜新市细河改造工程由四座橡胶坝和两岸防洪大堤组成，由于堤(坝)基第四系冲洪积层广泛发育，存在渗漏同题。合理选择施工处理方案，是工程成功的关键。作者根据场区不同的地质条件环境条件采取有针对性的不同处理方案，既解决了防渗问题又缩短了施工工期，降低工程造价，取得了很好的经济效益和社会效益。     

利用Excel表格进行供暖系统计算

利用Excel表格进行供暖工程设计计算，可以减少工作量，提高工作效率。介绍了房间热负荷和供暖管道水力计算方法。     

破碎流程设计与计算应用程序

利用DELPHI 6.0开发应用功能模块 ,形成破碎流程辅助设计系统 ,可以完成破碎流程及设备的选择计算 ,绘出破碎数质量流程图 ,特点是输入原始数据简单 ,计算速度快。     

First-principles study of the tensile and fracture of the Al/TiN interface

Employing the density functional theory, we investigate the tensile and fracture processes of the Al/TiN(0 0 1) interface. The simulation presents directly the strain–stress relationship, the ideal tensile strength and the process of bond breaking of the system. Through the analysis of deformation, we find that the softer Al layers deform larger than the harder TiN layers during the tensile process. And fracture occurs between the interface and the sub-interface Al layers. In addition, the results show that during the tensile process, the ripple of the interfacial TiN layer decreases gradually with the increment of the strain. Charge transfer was detected from the Al to TiN layers near the interface area during the tensile process by means of charge density and density of states analyses. The charge transfer affects the fracture process. Compared to our previous study of the Al/TiN(1 1 1) interface, the Al/TiN(0 0 1) interface has smaller work of adhesion and larger tensile strength than the Al/TiN(1 1 1) interface. Our investigation shows that the fractures of the Al/TiN(0 0 1) and (1 1 1) interface systems both happen in the Al layers near the interface.