Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions     

水土保持工程施工阶段的设计变更

通过对水土保持工程施工阶段设计变更原因的分析，指出水土保持生态工程施工阶段变更的必要性和建设、监理单位对变更管理的重要性。通过对变更设计的程序和原则进行的分析，阐述了变更设计涉及的几个主要问题。     

Use of climate scenarios to aid in decision analysis for interannual water supply planning

This work addresses the issue of climate change in the context of water resource planning on the time scale of a few years. Planning on this time scale generally ignores the role of climate change. However, where the climate of a region has already shifted, the use of historical data for planning purposes may be misleading. In order to test this, a case study is conducted for a region, the Australian Capital Territory, where long term drought is raising concerns of a possible climate shift. The issue is cast in terms of a particular planning decision; the option to augment water supply in the next few years to hedge against the drought persisting. A set of climate scenarios are constructed for the region corresponding to the historical climate regime and to regimes where progressively greater levels of change are assumed to have already taken place (5%, 10%, 20% reductions in mean rainfall). Probabilities of the drought persisting are calculated for each of the scenarios. The results show substantial increases in the probability of the drought persisting for even moderate reductions in mean rainfall. The sensitivity of the decision to augment supply to the scenario results depends ultimately on the planners tolerable thresholds for the probability of the drought persisting. The use of different scenarios enables planners to explore the sensitivity of the decision in terms of their risk tolerance to ongoing drought and to their degree of belief in each of the scenarios tested.     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

Energetics of Plastic Deformation of Metastable Austenitic Stainless Steel

The change in the internal energy during uniaxial tensile deformation of austenitic stainless steels EN 1.4301 (AISI 304) and EN 1.4318 (AISI 301LN) was determined by measuring the extent of γ→α'‐martensite transformation and the temperature increase of the samples. From the results the fraction of the stored energy of cold work and the free energy change related to the strain‐induced γ→α'‐martensite transformation were determined. The fraction of stored energy varied around 0.4. With the metastable steel grades the free energy change related to the γ→α'‐martensite transformation was found to vary between ‐98 MJ/m³ and ‐206 MJ/m³ depending on the austenite stability of the steel. Furthermore, the magnitude of the mechanical driving force was estimated by comparing the results with the free energy change of thermally induced transformation.     

Phase-change thermal energy storage using spherical capsules: performance of a test plant

The aim of this paper is the study of an industrial process of energy storage usable for air conditioning or refrigeration, investigating a test plant which is a tank with a reduced size, filled with randomly dispersed commercial nodules, placed in a refrigeration loop. The nodules are spherical capsules in which phase change materials (PCM) are encapsulated. This test plant permits the study at length of the behaviour of the tank with, in particular, the charge mode taking into account the undercooling and the discharge mode. A simulation program that considers aspects of both the surrounding heat transfer fluid and the phase-change material packed inside the nodules is developed here in the cases of the charge and the discharge processes. The simulation results are then compared with experimental observations.     

Using airborne laser scanning to monitor tree migration in the boreal-alpine transition zone

The boreal tree line is expected to advance upwards into the mountains and northwards into the tundra due to global warming. The major objective of this study was to find out if it is possible to use high-resolution airborne laser scanner data to detect very small trees — the pioneers that are pushing the tree line up into the mountains and out onto the tundra. The study was conducted in a sub-alpine/alpine environment in southeast Norway. A total of 342 small trees of Norway spruce, Scots pine, and downy birch with tree heights ranging from 0.11 to 5.20 m were precisely georeferenced and measured in field. Laser data were collected with a pulse density of 7.7 m^− 2. Three different terrain models were used to process the airborne laser point cloud in order to assess the effects of different pre-processing parameters on small tree detection. Greater than 91% of all trees > 1 m tall registered positive laser height values regardless of terrain model. For smaller trees (< 1 m), positive height values were found in 5-73% of the cases, depending on the terrain model considered. For this group of trees, the highest rate of trees with positive height values was found for spruce. The more smoothed the terrain model was, the larger the portion of the trees that had positive laser height values. The accuracy of tree height derived from the laser data indicated a systematic underestimation of true tree height by 0.40 to 1.01 m. The standard deviation for the differences between laser-derived and field-measured tree heights was 0.11-0.73 m. Commission errors, i.e., the detection of terrain objects — rocks, hummocks — as trees, increased significantly as terrain smoothing increased. Thus, if no classification of objects into classes like small trees and terrain objects is possible, many non-tree objects with a positive height value cannot be separated from those actually being trees. In a monitoring context, i.e., repeated measurements over time, we argue that most other objects like terrain structures, rocks, and hummocks will remain stable over time while the trees will change as they grow and new trees are established. Thus, this study indicates that, given a high laser pulse density and a certain density of newly established trees, it would be possible to detect a sufficient portion of newly established trees over a 10 years period to claim that tree migration is taking place.     

程控电话交换机过电流保护元件用高性能PTC陶瓷的研制

阐述了高性能ＰＴＣ陶瓷材料制备的基本要点，并以基方固溶体化学组成、原材料选择、复合添加物改性以及特定烧结工艺等方面开展工作，制得了居里温度为９０℃左右、室温体积电阻率为３０Ω·ｃｍ，电阻率突变ρνｍａｘ／ρνｍｉｎ＞１０５、电阻率温度系数α≈１５％／℃、耐电压强度≥１５０Ｖ／ｍｍ的高性能ＰＴＣ陶瓷材料。此材料制得的元件能满足程控电话交换机过电流保护的要求。     

SiH_4－O_2体系LPCVD SiO_2薄膜的工艺及其应用

本文研究了ＳｉＨ４—Ｏ２体系ＬＰＣＶＤＳｉＯ２的工艺及设备。为了得到厚度均匀性好的薄膜，改进了反应气体的进气方式和装片舟的结构，获得了每炉１００片、直径为１００ｍｍ的硅片的膜厚不均匀性≤士５％的结果。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.