基于工作站机群的数字电影计算处理系统

八十年代末,高精度连续图像数字处理技术日渐成熟,在电影制作中被大量采用并形成了完整的体系,即数字电影系统。尽管目前世界上的数字电影系统多种多样,但从功能上讲它们都由三部分组成:透射式胶片扫描输入系统、数据存储及处理系统(计算处理系统)和胶片记录输出系统。计算处理系统作为数字电影系统最重要的组成部分,承担着数字电影全部的数据处理和数据传输工作,其性能的好坏直接关系到整个系统的成败。本文主要介绍了一个基于工作站机群的计算处理系统,它以工作站机群替代昂贵的大型服务器进行连续帧的生成(渲染)工作,使得整个数字电影系统性价比更高,更适     

纳米SiO2—x填充LDPE配复合棚膜的制备及结构和性能表征

以 ＬＤＰＥ为基体制备了纳米ＳｉＯ_(２－ｘ)／ＬＤＰＥ复合棚膜。利用万能拉力试验机测定了棚膜的机械性能。利用红外光谱、紫外光谱研究了棚膜的光学性质;利用ＳＥＭ研究了纳米复合棚膜料的内部结构。结果表明：尽管目前研制的棚膜的力学性能无显著改善,但棚膜中纳米ＳｉＯ_２－ｘ对７～１４μｍ的红外线具有屏蔽作用,对紫外线也有屏蔽作用,可提高棚膜的光学特性,为提高作物品质创造条件。     

A new dynamic hydrogen reference electrode for applications in thin-film sensor systems

The realization and applicability of a new dynamic hydrogen reference electrode (DHRE) within an electrochemical microcell for sensor applications is reported. The electrodes are fabricated in thin-film technology and fixed within a flow-through device. An experimental setup for accurate electrochemical potential measurements is described. Smooth platinum, platinized platinum and pHEMA coated electrodes are investigated with regard to their initialization behavior, stability, reproducibility and interference with electrolytes. It is found that platinized platinum DHREs show excellent stability and reproducibility. For uncoated electrodes, the electrochemical potential is established within seconds. The potential is independent of the pH value within the range of pH 4–10. Interference with sulfate and phosphate is observed. Thus, the platinized platinum DHRE is well suited for bioanalytical sensor applications, where the pH value is buffered and the concentrations of the disturbing anions are constant or very low.     

CVD淀积SiC薄膜SiH4,CH4的分解反应的计算机模拟研究

采用化学气相淀积淀积ＳｉＣ薄膜中ＳｉＨ４、ＣＨ４的分解产物种属进行数学建模,并结合相关热力学数据进行计算机模拟,得出ＳｉＨ４分解产物中以ＳｉＨ２为最多,ＣＨ４以ＣＨ２为最多,表明它们在淀积薄膜中是主要因素。     

几起电脑故障及其排除方法

本文就日常工作中遇到的几起电脑故障进行分析,并提出相应的解决方法供电脑爱好者和遇到类似故障的用产参考。     

Nanoparticle-based lift-off technique for ultra-thin nanoporous film preparation

Ultra-thin membrane with nanoscale through hole has great potential in biomedical applications, where precise controllability of porosity, pore size and film thickness is urgently required. The present work proposed a cost-effective way to prepare the ultra-thin nanoporous film with a promising controllability. Monodispersed nanoparticle, rather than photoresist, is used as the sacrificial material for this new lift-off process. By releasing the particles, holes can be achieved with predeter-mined characters. A 110 nm-thick nanoporous aluminum film with well-controlled pore＇s diameter was successfully fabricated to validate the technique. The technique has wider process window and better applicability than other nanofabrication methods.     

Compact modeling of amorphous‐silicon thin‐film transistors with BSIM3

Abstract— A novel approach of modeling a‐Si:H TFTs with the industry‐standard BSIM3 compact model is presented. The described approach defines the a‐Si:H TFT drain current and terminal charges as explicit functions of terminal voltages using a minimum set of BSIM3 parameters. The set of BSIM3 parameters is chosen based on the electrical and physical characteristics of the a‐Si:H TFT and their values extracted from measured data. By using the selected BSIM3 model parameters, the a‐Si:H TFT is simulated inside SPICE to fit the simulated I‐V and C‐V curves with the measured results. Finally, the extracted BSIM3 model is validated by simulating the kickback voltage effect in an AMLCD pixel array.     

文字设计艺术在电视节目包装中的应用

文字是电视节目包装中的重要元素之一,除了传达信息的基本功能之外,经常起到决定整体效果的关键作用。节目包装文字设计应突出本台文化和本土文化,文字的设计必须与节目相匹配,形成统一整体。     

如何解决义务教育阶段学生跨省流动问题——基于．NET的国家义务教育学籍管理系统建设方案

我国现行的义务教育阶段学生学籍管理制度,不能适应近年来人口流动增加的实际情况。地区与地区之间缺乏必要的衔接,不同系统间的信息交换也没有统一的标准,造成当前电子学籍系统陷入“信息孤岛”的泥潭。B／S下基于．NET的国家义务教育管理系统,实现了省际信息共享．解决了学生跨省流动的难题。     

High-temperature superconducting microwave devices: Fundamental issues in materials, physics, and engineering

High-T _c superconductivity has generated a great deal of interest because of the challenges it presents in the fields of material science, condensed matter physics, and electrical engineering, and because of the potential applications which may result from these research efforts. Thin-film passive microwave components may become the first high-temperature superconducting (HTS) devices available for widespread use and commercialization. In this article, we review aspects of material science, physics, and engineering which directly impact high-T _c superconducting microwave devices and discuss issues which determine the performance of these devices. Methods of growing HTS thin films on large-area substrates, techniques for fabricating single-level HTS passive microwave components, and the relevant properties of high-T _c superconducting films are discussed, with a focus on thin films of the HTS material YBa₂Cu₃O_7–. Several known mechanisms for microwave loss in both the superconductor and the dielectric substrate are presented. An overview of the general classes of superconducting passive microwave devices is given, and representative microwave devices which have been recently demonstrated are described in detail. Examples of a select few HTS active microwave components are also presented. Potential microwave applications are illustrated with comparisons to current technology.