An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

曲边介质波导的有限元分析

本文应用曲边有限元方法有效地计算了曲边质波导的色散特性，编制了相应的计算程序,应用本文方法计算得到的椭圆旬质波导和组合椭圆介质波导的主模和高次模的色散曲线与文献[2],[3]的结果相当吻合。     

浍河水库泄洪洞结构优化研究

根据有限元计算原理，结合山西临汾地区浍河水库泄洪洞，对土坝下的大型软基涵洞分层填土施工过程和蓄水对结构的影响进行了模拟计算，得到了更贴近实际的涵洞结构内力和涵洞土压力分布规律，并根据实际地基条件及现有涵洞的两种常见的结构形态对涵洞结构形式进行了优化，其成果已用于设计和施工，证明了该研究方法的科学性和结论的正确性。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

挠性抗回旋PDC钻头的有限元分析

回旋是导致PDC钻头早期失效的主要原因，介绍了一种基于挠性钻头的构想设计的抗回旋PDC钻头，阐述了其结构和抗回旋原理。对挠性钻头的公、母接头进行了有限元应力分析，说明了模型建立、网格划分以及约束和载荷施加过程中所采用的方法和关键技术。有限元分析结果表明挠性钻头的强度满足要求。     

低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.     

软土地层中盾构法开挖三维有限元模拟

以某条软土地层中开挖的地铁隧道为例,根据非线性有限元法的基本原理,利用大型非线性有限元软件ADINA三维动态模拟地铁隧道开挖过程,计算结果揭示了在盾构推进过程中地表沉降分布以及特点,得到盾构法开挖引起的地表沉降曲线,其形态与Peck计算得出的横向地表沉降槽正态分布曲线的形态基本一致,隧道轴线正上方地表沉降最为明显。     

影响长廊阻抗式调压室配筋的几个因素分析

采用三维非线性有限元方法,对四川天全县干溪坡水电站调压室结构特性进行研究,并对几个影响配筋的因素进行敏感性分析,得出各个因素对配筋结果的影响,为调压室结构设计提供科学依据。     

不规则I型和L型横截面形状薄壁杆件的横向弯曲稳定分析

根据势能驻值原理,采用转换B3样条函数模拟杆件横截面的翘曲位移场,文[8]提出了用于分析在横向荷载作用下薄壁杆件稳定问题的样条有限杆元法。方法适用于任意横截面形状和任意边界条件的薄壁杆件,考虑了杆壁中面上剪切变形的影响,能很好地描述剪力滞后现象。本文讨论了不规则I型截面简支梁和L型截面简支梁的屈曲分析,数值算例的结果表明了方法的灵活性、精确性和有效性。