Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Analytical general results for handoff dwell time distribution in wireless networks

1 Introduction The calling dwell time characteristic is critical for the user network planning and deployment, e.g., global system for mobile communications (GSM), as well as the next generation wireless multimedia networks, such as, the currently standar…     

Non‐reflecting artificial boundaries for transient scalar wave propagation in a two‐dimensional infinite homogeneous layer

This paper presents an exact non‐reflecting boundary condition for dealing with transient scalar wave propagation problems in a two‐dimensional infinite homogeneous layer. In order to model the complicated geometry and material properties in the near field, two vertical artificial boundaries are considered in the infinite layer so as to truncate the infinite domain into a finite domain. This treatment requires the appropriate boundary conditions, which are often referred to as the artificial boundary conditions, to be applied on the truncated boundaries. Since the infinite extension direction is different for these two truncated vertical boundaries, namely one extends toward x →∞ and another extends toward x→‐ ∞, the non‐reflecting boundary condition needs to be derived on these two boundaries. Applying the variable separation method to the wave equation results in a reduction in spatial variables by one. The reduced wave equation, which is a time‐dependent partial differential equation with only one spatial variable, can be further changed into a linear first‐order ordinary differential equation by using both the operator splitting method and the modal radiation function concept simultaneously. As a result, the non‐reflecting artificial boundary condition can be obtained by solving the ordinary differential equation whose stability is ensured. Some numerical examples have demonstrated that the non‐reflecting boundary condition is of high accuracy in dealing with scalar wave propagation problems in infinite and semi‐infinite media. Copyright © 2003 John Wiley & Sons, Ltd.     

ACCELERATION AMBIGUITY FUNCTION OF RADAR SIGNALS AND ITS APPLICATION

High acceleration of radar targets is analyzed using Acceleration Ambiguity Function(AAF). The acceleration resolution based on AAF is defined. The AAF and acceleration resolution of rectangle pulse signal are derivated and the conclusion that its acceleration resolution is in inverse proportion with the square of its duration is drawn. In the end, these conclusions are applied to the parameter designing and performance evaluation for a certain type of pulse Doppler radar.     

转换波延迟时静校正

为了克服传统转换波静校正方法应用效果不佳的缺点,本文介绍一种转换波延迟时静校正方法,此法根据转换波勘探时垂直分量记录的纵波近地表模型及水平分量记录的初至时与纵波分量的初至时之差,求取转换波延迟时,并根据转换波延迟时建立横波的近地表模型,从而求取接收点的横波静校正量。文中给出了转换波延迟时静校正量的计算公式,并用实际地震数据进行了检验。结果表明此法应用效果较好,可以推广应用。目前该静校正方法已经集成到KLSeis采集软件中。     

"Temporal encoding in fear conditioning revealed through associative reflex facilitation": Correction to Lindquist and Brown (2004).

Reports an error in "Temporal Encoding in Fear Conditioning Revealed Through Associative Reflex Facilitation" by Derick H. Lindquist and Thomas H. Brown (Behavioral Neuroscience, 2004[Apr], Vol 118[2], 395-402). The article contained several errors. On page 396, second paragraph, the sentence beginning on line 6 should read as follows: "Having a stable baseline is critical for studies of reflex facilitation because the experimental designs invariably entail repetitive CR testing, if only to achieve reasonable statistical power (see Choi et al., 2001b; Lindquist & Brown, 2004)." On page 400, the first heading should read as follows: "Comparison of New and Old Reflex Facilitation Procedures." On page 400, the first sentence under the abovementioned heading should read as follows: "We decided not to use the original measure of reflex facilitation, developed by J. S. Brown et al. (1951), because it suffers from severe interpretational limitations, elaborated in detail elsewhere (Choi et al., 2001b; Leaton & Cranney, 1990; Lindquist & Brown, 2004)." (The following abstract of the original article appeared in record 2004-12681-016.) Temporal encoding in Pavlovian fear conditioning was examined through conditional facilitation of the short-latency (Rl) component of the rat eyeblink reflex. Rats were fear-conditioned to a tone conditional stimulus (CS) with either a 3- or 9-s interstimulus interval (ISI) between CS onset and the onset of the grid-shock unconditional stimulus (US). Rl facilitation was tested over 2 days, in counterbalanced order, at a latency of 3 s and 9 s from CS onset. CS-produced Rl facilitation, the conditional response (CR), was 3-4 times larger when the test latency equaled the conditioning ISI. These results, coupled with the known neurophysiology of Rl facilitation, suggest that this CR could disclose differences in the time course of CS-generated output from the amygdala when driven by cortical versus subcortical CS-CR pathways. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

频域吸收边界条件的构造理论

在频域中推导了适用于差分类数值方法的吸收边界条件的构造方法，并通过选取不同参数导出了几种现有的吸收边界条件。在计算了一般形式的吸收边界条件的反射系数之后，提出了一种简单实用的自适应吸收边界条件。     

抗生素生产过程补料时机的Fuzzy识别与预报

本文就抗生素发酵生产过程,提出了一种补料时机的Fuzzy识别、预报的建模方法,并根据20m~3发酵罐工业数据的分析,选取了以总糖、总糖变化率、氨基氮和氨基氮变化率四个主要参数作为输入集因素,运用本文提出的方法,建立了一个实际的抗生素发酵生产过程补料时机的 Fuzzy 识别、预报模型。经现场调试效果良好,与富有经验的行家相比,准确率达90%以上。     

具有常数收获率的竞争—扩散问题解的性态

讨论牛曼边界条件下具有常数收获率的竞争—扩散问题解的性态,得到当收获率满足当条件时,种群u将在有限时刻被消灭。     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.