合成工艺对PMN-PNN-PZT 四元系压电陶瓷性能的影响

研究了前驱体合成(又称铌铁矿合成)与传统的氧化物混合合成,对PMN-PNN-PZT四元系压电陶瓷性能的影响。结果表明,前驱体合成工艺能够在合成过程中避免焦绿石相的生成。并且相比较于氧化物混合合成的工艺,它能使得压电陶瓷的压电常数d33由475 pC/N提高到530 pC/N,机械品质因数Qm从96提高到185,介质损耗tanδ也从0.020降低到0.009。综合实验分析结果得出前驱体合成方法是一种更加优异的合成方法。     

一种无人机扩频遥控系统的性能分析

在剖析无人机扩频遥控系统组成的基础上,对无人机扩频遥控系统的处理增益、抗干扰容限及保密性能做了具体的分析,对无人机扩频遥控系统的雷达截获概率做了深入的探讨。     

线型双酚A酚醛树脂的合成

对线型双酚A酚醛树脂的合成工艺及催化剂浓度、种类、反应时间、醛酚比等影响因素进行了研究。结果表明,随着反应物醛酚比的增大,产物中残留的BPA量呈下降趋势,软化点先上升后下降,在1.2左右出现峰值;随反应时间延长,产物的软化点升高,分子质量增大,残留BPA量减少,分子质量分散性增加;催化剂用量增大,分子质量增大,软化点增高,残留BPA含量降低。合理的催化剂用量为m(BPA)∶m(催化剂)=100∶20。以合成的BPAN代替双氰胺(D ICY)作环氧树脂EB454A80的固化剂,在相同的固化工艺条件下,固化物的Tg提高近12℃。     

Comparative Antimicrobial Activity of Silver Nanoparticles Obtained by Wet Chemical Reduction and Solvothermal Methods

The synthesis of nanoparticles from noble metals has received high attention from researchers due to their unique properties and their wide range of applications. Silver nanoparticles (AgNPs), in particular, show a remarkable inhibitory effect against microorganisms and viruses. Various methods have been developed to obtain AgNPs, however the stability of such nanostructures over time is still challenging. Researchers attempt to obtain particular shapes and sizes in order to tailor AgNPs properties for specific areas, such as biochemistry, biology, agriculture, electronics, medicine, and industry. The aim of this study was to design AgNPs with improved antimicrobial characteristics and stability. Two different wet chemical routes were considered: synthesis being performed (i) reduction method at room temperatures and (ii) solvothermal method at high temperature. Here, we show that the antimicrobial properties of the obtained AgNPs, are influenced by their synthesis route, which impact on the size and shape of the structures. This work analyses and compares the antimicrobial properties of the obtained AgNPs, based on their structure, sizes and morphologies which are influenced, in turn, not only by the type or quantities of precursors used but also by the temperature of the reaction. Generally, AgNPs obtained by solvothermal, at raised temperature, registered better antimicrobial activity as compared to NPs obtained by reduction method at room temperature.     

白藜芦醇糖苷类衍生物的设计与合成

以白藜芦醇及其类似物紫檀芪为原料,采用Schmidt成苷法、相转移催化法,分别与溴代糖和乙酰氨基糖反应,得紫檀芪乙酰葡萄糖苷和(E)-5,4'-二叔丁基二甲基硅基-3-(2"-乙酰氨基-3",4",6"-三乙酰葡萄糖二苯乙烯,其结构经红外光谱、核磁共振氢谱和质谱表征.     

羧酸和乙酸酐合成甲基酮的研究

酮是化学化工行业应用广泛的重要中间体,其常见的合成方法这些年来不断有新的报道。文章研究了以常见的羧酸和乙酸酐为起始原料合成甲基酮的方法。该方法实施简单,产物收率62%～89%,为酮提供了一种未见文献报道的合成新方法。     

煅烧温度对环保型莫来石多孔陶瓷结构和性能的影响

莫来石多孔陶瓷因其高强度和耐腐蚀等性能得到广泛地应用。然而,由于合成莫来石的原料高岭土的不可再生性及持续上涨的价格,寻找廉价易得的替代原料对于合成莫来石多孔陶瓷迫在眉睫。建筑废弃物的成分与高岭土相似,可作为高岭土的可行替代品之一。以建筑废弃物和Al₂O₃为主要原料,AlF₃为晶须催化剂,B₂O₃为烧结助剂,成功制备了环保型莫来石多孔陶瓷。通过阿基米德排水法、XRD和SEM等表征手段,深入探究了多孔陶瓷的晶相、微观形貌和物理化学特性。同时,研究了煅烧温度对莫来石多孔陶瓷结构和性能的影响规律及作用机制。结果表明,适当提升煅烧温度有助于莫来石晶须的生成,但过高的温度会导致晶须粗化和晶粒增大。当煅烧温度为1 200 ℃时,莫来石晶须的生长形貌最佳,晶须直径约为0.05—0.1 μm、长度为0.5—1 μm、长径比在15—20之间。随着煅烧温度增加,莫来石多孔陶瓷的开口孔隙率不断降低,抗折强度不断增强。当煅烧温度为1 200 ℃时,样品的开口孔隙率达到（61.78±0.72 ）%,抗折强度达到（3.74±0.46） MPa。因此,以建筑废弃物为主要原料可成功制备具有高气孔率的莫来石多孔陶瓷。本研究为建筑废弃物合成莫来石多孔陶瓷提供了可靠的理论支持,对降低生产成本及推动建筑废弃物资源化再利用等有重要理论价值和实际意义。