长颗粒(柱状晶)Si3N4陶瓷的研究及进展

Si3N4陶瓷材料由于具有很好的高温性能及高的力学性能，而被广泛地用于结构陶瓷，如切削刀具等。然而，因为其对缺陷很敏感，故易受灾难性的失效。人们发展了多种Si3N4增韧陶瓷，其中自增韧由于一些优异的性能越来越受到人们的重视。在此文中，着重介绍了影响Si3N4陶瓷长颗粒(柱状晶)晶粒生成的因素，并介绍了国内外对长颗粒Si3N4晶的控制研究。     

关于飞行力学的再思考

对多年来国内外有关飞行力学的发展过程、研究范畴、分类，以及问题表述方式等重新进行了一些考察和思考．从学术和实践的观点，对飞行力学的体系结构和问题表述方式等进行了讨论，并提出了个人的一些看法和建议．     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

Effects of mechanical interactions on the hydrostatic stress in randomly distributed rubber particles in an amorphous polymer matrix

The equivalent inclusion method (EIM) assuming linear elasticity is used to calculate the mechanical interactions between spherical rubber particles in an amorphous matrix, as in a rubber toughened polymer. The influences of the various calculation parameters are examined and it is shown that the method can provide reliable results with regard to the level of hydrostatic stress in the particles. Damage of the material is simulated by replacing the most stressed particles by voids. Numerical simulations for several hundreds of interacting particles give information on the kinetics and spatial organisation of the damage. It appears that, as the volume fraction of particles increases from 10 to 20%, the spatial configuration of the damage evolves from a localised to a diffuse mode. These results are discussed in relation to the efficiency of rubber toughening.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

Effects of Trace Zinc on Toughening and Strengthening of Steels

ＥｆｅｃｔｓｏｆＴｒａｃｅＺｉｎｃｏｎＴｏｕｇｈｅｎｉｎｇａｎｄＳｔｒｅｎｇｔｈｅｎｉｎｇｏｆＳｔｅｅｌｓＳｈｉＣｈｏｎｇｚｈｅ①ＡＢＳＴＲＡＣＴＩｍｐａｃｔｂｅｎｄａｎｄｓｔａｔｉｃｔｅｎｓｉｌｅｃｏｍｐａｒｉｓｏｎｔｅｓｔｓａｒｅｃａｒｒｉｅｄｏ...     

砼坝裂缝稳定性分析

通过比较线弹性断裂力学中的两种计算应力强度因子的方法，外推法和奇异单元法，得到相应的结论；并以某砼坝下游部位出现裂缝为例，分析在不利荷载作用下裂缝的稳定性。     

Cohesive stresses and size effect in quasi-brittle materials

A novel approach to the derivation of Bažant’s size effect law is presented. Contrarily to the original Lagrangian derivation which hinged on energetic consideration, a Newtonian approach based on local stress intensity factors is presented. Through this approach, it is shown that Bažant’s size effect law is the first (and dominant) term in a series expansion for the nominal stress. Furthermore, analytical expressions forB are derived for selected specimen geometries.     

Ultrasonic nondestructive evaluation of fibre-reinforced composite materials — a review

A framework is presented for examining the effectiveness of limiting and modelling arguments used in the analysis of fluid flows. It consists of examining the consequences of the arguments on the flow problem as a whole and breaking down the limiting/modelling process into a sequence of steps and associated sequence of flow problems, termed here as ‘lidels’. The notion of validity of lidels is given. Several examples are given to explain the present approach. Invited general lecture at 3rd ACFM, Tokyo, September 1986     

钢纤维混凝土轴拉应力-应变特性的试验研究

本文采用环氧粘接法对4种纤维混凝土材料进行了轴向拉伸试验，成功地获得了材料的应力-应变全曲线。根据其试验曲线是否出现第二峰值，把纤维分为增强与增韧两大类。通过分析表明：不同的纤维形式对混凝土材料的作用机理有较大的差异。在工程应用中，应根据纤维混凝土材料的用途来选择纤维类型。