T形柱正反向受剪承载力和变形能力特性研究

由于T形柱特殊的截面形式,正反向受剪时将分别处于腹板受压、翼缘受拉和腹板受拉、翼缘受压两种状态,故其正反向受剪承载力和变形能力与十字形柱相比差异较大。通过对国内T形柱受剪承载力试验进行分析,探讨了T形截面柱正反向受剪承载力特性,并对某一T形柱进行低周反复荷载试验,分析了低剪跨比状态下T形柱正反向加载破坏特征、承载能力和变形能力特性。研究表明,T形柱截面不规则,当狭义剪跨比小于3.0时,正反两个方向受剪承载能力和变形能力存在显著差异,两个方向的抗震性能亦存在差异,腹板受压时,柱脚腹板混凝土破坏严重,降低了异形柱的截面刚度和承载力,成为异形柱结构的薄弱部位。     

改进的基于单片机的无线路灯控制系统

针对目前城市路灯照明系统存在自动化管理水平还不很高、系统可靠性不高等问题,提出了一个改进的路灯集中监控系统。该系统是集自动控制技术、传感器技术、无线通讯技术、监控系统网络技术和软件技术于一体的无线路灯群式控制系统。该系统针对阴雨天气的情况设计了更加完善的控制方案,保证了路灯处于良陛状态,并且能够将故障信息反馈给上位机,减少了以往人工查洵的负担,提高城市道路照明的现代化控制和管理水平。     

控制系统可靠性评估方法

针对控制系统应用的特点,依据国家标准GB/T20438的建模方法,本文提出了一种利用马尔可夫预测的基本原理,将马尔可夫链引入到控制系统可靠性模型建立中,利用状态转移矩阵计算可靠性指标的方法。并提出依据系统状态化简模型的具体方法。该方法可以有效的减少马尔可夫模型的复杂度,有利于可靠性指标的具体计算。     

T400工艺板在飞剪电控系统改造中的应用

本文在起停式飞剪的电控系统改造中,采用基于T400工艺模块的分级分布式计算机控制系统,建立了控制系统的数学模型,并针对该控制系统进行了MATLAB仿真。仿真结果表明,该控制系统设计合理,调节系统的动、静态特性较好。     

结合先天和适应性免疫的蠕虫检测免疫模型

现有的蠕虫检测方法大多通过关闭不安全的端口,切断感染主机与未感染主机之间通信等方法延缓蠕虫传播而达到将损害减少到最低程度的目的.实际上在实施这些方法时往往有许多障碍需要克服,其中的最大障碍就是存在错误检测率高的问题.现将免疫危险理论中的DCs(树突状细胞,Dendritic Cells)-T细胞协同机制用于蠕虫检测,其中DCs属于先天免疫系统细胞,T细胞属于适应性免疫系统细胞.本模型将蠕虫进程触发的系统调用序列当作抗原,将感染蠕虫导致的主机和网络异常当作危险信号.在该模型中,DCs负责危险信号的收集检测并提呈与该危险信号关联的抗原给T细胞检测器进行抗原结构检测.理论分析说明,这样的双重检测方法可以降低伪肯定率和伪否定率,并且记忆T细胞检测器的采用能使系统对类似蠕虫的再次感染反应更加迅速.     

基于Web Services的科技信用信息共享

针对科技信用缺失现象,应健全科技计划和科学基金信用制度,非常重要的一项就是健全信用信息共享机制。利用Web Services可以方便地实现不同系统之间的数据交换和集成。本文提出基于Web Services的科技信用信息共享平台的思想,详细介绍信用信息数据库的建立、信息收集和信息处理,最后探讨信用评估体系的确立。     

基于嵌入式Linux的RF手持设备红外通讯的设计

本文从硬件及软件两个方面介绍了TagmasterAB公司的RF手持设备的红外通讯的实现。硬件方面,结合AT91RM9200对红外接口的支持以及HSDL3602的硬件特性,给出了一个设计方案;软件方面,结合硬件特性,从驱动出发,分别讨论了上位机和下位机应用程序的实现过程。最后给出了该方案的设计结果。     

Tetrabutylammonium Bromide Functionalized Ti3C2Tx MXene as Versatile Cathode Buffer Layer for Efficient and Stable Inverted Perovskite Solar Cells

2D Ti₃C₂T_x MXene, possessing facile preparation, high electrical conductivity, flexibility, and solution processability, shows good application potential for enhancing device performance of perovskite solar cells (PVSCs). In this study, tetrabutylammonium bromide functionalized Ti₃C₂T_x (TBAB-Ti₃C₂T_x) is developed as cathode buffer layer (CBL) to regulate the PCBM/Ag cathode interfacial property for the first time. By virtue of the charge transfer from TBAB to Ti₃C₂T_x demonstrated by electron paramagnetic resonance and density functional theory, the TBAB-Ti₃C₂T_x CBL with high electrical conductivity exhibits significantly reduced work function of 3.9 eV, which enables optimization of energy level alignment and enhancement of charge extraction. Moreover, the TBAB-Ti₃C₂T_x CBL can effectively inhibit the migration of iodine ions from perovskite layer to Ag cathode, which synergistically suppresses defect states and reduce charge recombination. Consequently, utilizing MAPbI₃ perovskite without post-treatment, the TBAB-Ti₃C₂T_x based device exhibits a dramatically improved power conversion efficiency of 21.65% with significantly improved operational stability, which is one of the best efficiencies reported for the devices based on MAPbI₃/PCBM with different CBLs. These results indicate that TBAB-Ti₃C₂T_x shall be a promising CBL for high-performance inverted PVSCs and inspire the further applications of quaternary ammonium functionalized MXenes in PVSCs.     

Noble Metal Ion-Directed Assembly of 2D Materials for Heterostructured Catalysts and Metallic Micro-Texturing

Assembling 2D-material (2DM) nanosheets into micro- and macro-architectures with augmented functionalities requires effective strategies to overcome nanosheet restacking. Conventional assembly approaches involve external binders and/or functionalization, which inevitably sacrifice 2DM's nanoscale properties. Noble metal ions (NMI) are promising ionic crosslinkers, which can simultaneously assemble 2DM nanosheets and induce synergistic properties. Herein, a collection of NMI–2DM complexes are screened and categorized into two sub-groups. Based on the zeta potentials, two assembly approaches are developed to obtain 1) NMI-crosslinked 2DM hydrogels/aerogels for heterostructured catalysts and 2) NMI–2DM inks for templated synthesis. First, tetraammineplatinum(II) nitrate (TPtN) serves as an efficient ionic crosslinker to agglomerate various 2DM dispersions. By utilizing micro-textured assembly platforms, various TPtN–2DM hydrogels are fabricated in a scalable fashion. Afterward, these hydrogels are lyophilized and thermally reduced to synthesize Pt-decorated 2DM aerogels (Pt@2DM). The Pt@2DM heterostructures demonstrate high, substrate-dependent catalytic activities and promote different reaction pathways in the hydrogenation of 3-nitrostyrene. Second, PtCl₄ can be incorporated into 2DM dispersions at high NMI molarities to prepare a series of PtCl₄–2DM inks with high colloidal stability. By adopting the PtCl₄–graphene oxide ink, various Pt micro-structures with replicated topographies are synthesized with accurate control of grain sizes and porosities.     

Powell–Sabin B‐splines and unstructured standard T‐splines for the solution of the Kirchhoff–Love plate theory exploiting Bézier extraction

The equations that govern Kirchhoff–Love plate theory are solved using quadratic Powell–Sabin B‐splines and unstructured standard T‐splines. Bézier extraction is exploited to make the formulation computationally efficient. Because quadratic Powell–Sabin B‐splines result in ‐continuous shape functions, they are of sufficiently high continuity to capture Kirchhoff–Love plate theory when cast in a weak form. Unlike non‐uniform rational B‐splines (NURBS), which are commonly used in isogeometric analysis, Powell–Sabin B‐splines do not necessarily capture the geometry exactly. However, the fact that they are defined on triangles instead of on quadrilaterals increases their flexibility in meshing and can make them competitive with respect to NURBS, as no bending strip method for joined NURBS patches is needed. This paper further illustrates how unstructured T‐splines can be modified such that they are ‐continuous around extraordinary points, and that the blending functions fulfil the partition of unity property. The performance of quadratic NURBS, unstructured T‐splines, Powell–Sabin B‐splines and NURBS‐to‐NURPS (non‐uniform rational Powell–Sabin B‐splines, which are obtained by a transformation from a NURBS patch) is compared in a study of a circular plate. Copyright © 2015 John Wiley & Sons, Ltd.