高可靠性远程数据传输系统设计

针对飞行器系统测试设备研制的要求,设计了一种基于LVDS串行/解串器架构的远程数据传输系统;系统包括远程数据传输模块和电流/电压信号转换模块,采用双绞线传输与普通并行线传输相结合的方式,实现远程数据传输的功能;系统采用FPGA作为主控芯片,使用电缆驱动芯片和自适应电缆均衡器来增强双绞线驱动能力,使用电流环信号传输方式代替电压信号传输方式来增加低速信号的抗干扰能力,同时对PCB布板和系统软件做可靠性优化设计,大大提高了该系统在恶劣使用环境下远距离数据传输的可靠性;目前该系统可以在恶劣电磁环境下以176Mbps的单线波特率在47米实验双绞电缆上实现无误码数据传输。     

Independent spanning trees vs. edge-disjoint spanning trees in locally twisted cubes

Fault-tolerant broadcasting and secure message distribution are important issues for numerous applications in networks. It is a common idea to design multiple spanning trees with a specific property in the underlying graph of a network to serve as a broadcasting scheme or a distribution protocol for receiving high levels of fault-tolerance and of security. A set of spanning trees in a graph is said to be edge-disjoint if these trees are rooted at the same node without sharing any common edge. Hsieh and Tu [S.-Y. Hsieh, C.-J. Tu, Constructing edge-disjoint spanning trees in locally twisted cubes, Theoretical Computer Science 410 (2009) 926-932] recently presented an algorithm for constructing n edge-disjoint spanning trees in an n-dimensional locally twisted cube. In this paper, we prove that indeed all spanning trees constructed by their algorithm are independent, i.e., any two spanning trees are rooted at the same node, say r, and for any other node v≠r, the two different paths from v to r, one path in each tree, are internally node-disjoint.     

基于数据库的工作数据的磁带备份

本文主要讨论了一个系统在正常工作时所产生工作数据的备份方案 。该备份方案利用数据库的操作,实现了对工作数据存储空间的自动管理。本方案的数据存储结构简单,实现方便,其主要任务是：每天对系统产生的工作数据文件进行备份,备份完毕后,将备份情况通过数据库站,使之修改数据库,备份介质作永久保存;同时,对数据存储空间进行 清理,使其保持足够的可用性。     

Vertex-pancyclicity of twisted cubes with maximal faulty edges

The n-dimensional twisted cube, denoted by TQ _n , a variation of the hypercube, possesses some properties superior to the hypercube. In this paper, we show that every vertex in TQ _n lies on a fault-free cycle of every length from 6 to 2 ⁿ , even if there are up to n?2 link faults. We also show that our result is optimal.     

梯形波带扰流元件对高黏度流体强化传热效率影响的实验研究

在流体介质为高黏度流体下,对管内插入梯形波带强化传热效率进行了实验研究。实验过程中,采用水浴换热器。管壳外为85℃的水浴,管内介质流体为原油。实验在雷诺数Re为15.4～36.9进行测量。实验结果表明,与光滑管比较,插入梯形波带后虽然压差阻力略有增加,但强化传热效果提高显著。通过评价分析得出曲线图表,表明梯形波带内插件适用于高黏度流体。     

高温超导变压器及发展现状

介绍高温超导变压器及其优点．并分析高温超导变压器与传统油浸变压器的区别，对高温超导变压器的发展现状进行总结，其中着重介绍在变压器应用中高温超导线材的性能参数和高温超导变压器的性能参数。探讨高温超导变压器的应用前景。     

Cold Modelling of Slag Splashing in LD Furnace by Oxygen Lance with Twisted Nozzle Tip

The effects of a conventional lance tip with 4 normal nozzles and a lance tip with 4 twisted nozzles on slag splashing were investigated. A cold model for LD converters, Jiuquan Iron & Steel Co., was established and the amount of slag splashed onto the model walls was measured in the cold modelling experiments. The results from the experiments show that at low top gas flow rate the amount of slag splashing for the tip with twisted nozzles is less than that for the conventional tip, whereas at high top gas flow rate the amount of slag splashing for the nozzle twisted lance is greater than that for the conventional lance. For the nozzle twisted lance tip, slag splashing rates increase with increase in slag amount, lance height and top gas flow rate and the maximum amount of slag splashing for the tip with twisted nozzles can be obtained under the process parameters of 47.6 Nm³/h gas flow rate, 12% slag amount and 247 mm lance height. More slag droplets can be directed onto the cone with a nozzle twisted lance tip than with a normal lance tip at high top gas flow rate.     

扭余模代数的一些性质

主要研究了右H-余模代数上的扭的卷积性质，对τ能够作成Hopf代数的扭的充分必要条件，以及扭作用对左H-模代数和右H-余模代数A的结构产生的影响进行了深入探讨。通过严密的推理验证，得出了扭作用的卷积仍旧是扭作用；给出了τ作成Hopf代数(H，△)的扭作用的充分必要条件；证明了(A^H)^τ=(A^τ)^H，(A^coH)^τ=(A^τ)^coH；主要证明了扭的卷积仍是扭，并进一步研究了Hopf代数以及作为左H-模代数和右H-余模代数A的扭性质。     

高压电机用环氧玻璃粉云母带

本介绍了介电强度达45MW／m以上的高压电机用环氧玻璃粉云母带的研制情况及应用。