三峡永久船闸结构缝渗漏处理技术

在三峡永久船闸结构缝处理过程中，认真分析了结构缝渗漏的原因，通过止水检查槽进行压水检查，确定了渗漏部位。结合渗漏具体情况，采取了结构缝表面嵌填止水材料和廊道周边止水检查槽灌浆相结合的处理方法。在实施过程中，采用了多种新材料和新工艺，取得了良好的效果。     

通用USB接口设备控制器的研究

简要介绍了USB技术的发展与现状；详细论述了USB系统的硬件结构；深入研究了USB系统的特点；探讨了USB系统目前仍在的问题。     

Suppression of void coalescence in thermal aging of tin-silver-copper-X solder joints

Addressing the potential for drop impact failure of Pb-free interconnects, the shear ductility after extensive aging of Sn-Ag-Cu (SAC) solders has been improved radically by Co or Fe modifications. Several other SAC+X candidates (X=Mn, Ni, Ge, Ti, Si, Cr, and Zn) now have been tested. Solder joint microstructures and shear strength results show that new SAC+X alloys also suppress void formation and coalescence at the Cu (substrate)/Cu₃Sn interface (and embrittlement) after aging at 150°C for up to 1,000 h. Microprobe measurements of 1,000 h aged samples suggest that Cu substitution by X is usually accentuated in the intermetallic layers, consistent with X=Co and Fe results.     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

参数强迫激励下非线性振子尖点型奇点的分叉

本文首先研究了不具有Z_2—对称性时的规范形理论和退化向量场的普适开折理论。然后利用这些理论研究了参数激励与强迫激励联合作用下非线性振动系统的尖点型奇点的余维2退化分叉。     

一种新型预应力托换结点的试验研究

针对深圳地铁的桩基托换而进行了一种新型预应力托换结点的试验研究，通过试验，得到了此托换结点的受力特性，为同类的大型托换的理论及实践提供了一种安全可行的方案。     

唐钢第二炼铁厂3#高炉开口机改造及效果

对唐钢第二炼铁厂3#高炉开口机的工作原理及其在工作中存在的问题进行了分析，通过对开口机四连杆机构、十路接头油管的改造，节约了大量的备件费用，具有较好的推广使用价值。     

Detection and modification of confusing color combinations for red‐green dichromats to achieve a color universal design

Color‐vision deficiency is a relatively common genetic condition, which often leads to the obstruction of necessary information in colored images. It is important to minimize such inconvenient effects in communication using colored images from a universal design perspective. The universal design principle stipulates that all environments and products should be usable by all people, regardless of age, physical attributes, and ability. This article proposes a method to detect color combinations in a given image that would confuse color dichromats, and suggests a way in which to modify them to make the image easily distinguishable for both normal and dichromatic observers. Confusing color combinations were detected based on a color‐difference calculation using simulations of how the color would appear to dichromats. The confusing colors were then modified based on the minimization of an evaluation function, which was defined as the sum of the degree of confusion and the degree of color change from the original image. Several colored images obtained by the proposed method were compared with the originals by red–green dichromatic observers who judged them to be clearer, thereby confirming that the proposed method was effective for color rendering for universal design. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 203–211, 2008     

K-230B镗床万向护板的设计

介绍了大型机床地坑移动盖板的一般设计思想,根据机床原有功能和结构特点,设计兼顾防尘防屑和美观大方两大特点的活动盖板,为同类设计提供一些参考。     

不锈钢网架结构试验研究

对奥氏体不锈钢网架结构的物理力学性能、焊接性能加以分析，并进行了不锈钢焊接空心球节点承载力试验，确定了该种节点的受拉和受压承载能力。在此基础上，又做了不锈钢组合扭网壳模型的破坏性试验研究，试验结果与理论计算值比较，吻合较好。