偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

Manufacture of carbon fibers from polyacrylonitrile precursors treated with CoSO4

Free‐radical solution copolymerization of itaconic acid and acrylonitrile was carried out in DMSO using azodiisobutyronitrile as an initiator, changing the feed rate of itaconic acid. The resulting polymerization solution was spun to form polyacrylonitrile (PAN) precursors of carbon fibers. The precursors were treated with a CoSO₄ aqueous solution on‐line. The structure and properties of untreated and treated PAN precursors and the resultant carbon fibers were characterized by SEM and TEM, a stabilization process, etc. It is suggested that CoSO₄ acts as a catalyst in the formation of a ladder structure and reduces the temperature of cyclization, and the carbon fibers developed from treated PAN fibers showed improvement in the tensile strength and the Young's modulus. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 153–158, 2002     

IFP连续重整新一代催化剂再生技术的改进

介绍了我国引进的采用法国石油研究院 (IFP)三代催化剂连续再生技术的重整装置 ,分析了第二、第三代技术在原有基础上的改进 ,从再生气循环回路、再生操作参数和再生器内部结构三个方面重点介绍了第三代催化剂连续再生技术的特点和优势 :使催化剂的烧焦气循环回路与氧氯化用气、焙烧气循环回路彼此分开 ,烧焦、氧氯化、焙烧的操作参数可分别得到优化 ,使氧氯化及焙烧在高氧条件下进行 ,有利于催化剂金属的再分散 ,保持催化剂的活性。     

Acceptability of genetically modified cheese presented as real product alternative

European consumers, in general, have negative attitudes towards the use of gene technology in food production. The objective of this study was to examine whether taste and health benefits influence the acceptability of genetically modified (gm) products when they are presented as real product alternatives. Consumers in Denmark, Finland, Norway and Sweden (n=738) assessed two cheeses: one was labelled as genetically modified (preferred in an earlier product test) and the other as conventional (neutral in an earlier product test). A smaller control group received two cheeses with blind codes. Labelling decreased consumers' intentions to buy the originally preferred gm-labelled cheese, but still the intentions were at the same level with the conventionally labelled option. Participants chose two gm cheeses out of five possible when given the option to take cheese home after tasting. Intentions to buy gm cheese could best be explained by respondents' attitudes towards gene technology and perceived taste benefits. General health interest was also a reinforcer of intentions for gm cheese with reduced fat content.     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

纳米二氧化钛的表面修饰与应用的研究进展

介绍了纳米二氧化钛表面修饰的两种主要方法:无机和有机表面包覆,以及进行修饰后的纳米二氧化钛的应用.     

尿素对以硝酸铝和葡萄糖为原料合成氮化铝粉末反应过程中相变及反应速率的影响

以硝酸铝(Al(NO3)3·9H2O)和葡萄糖(C6H12O6·H2O)为原料,利用碳热还原法制备氮化铝粉末,研究了尿素对前驱物的制备及前驱物氮化反应的影响,研究发现添加尿素合成的前驱物和未添加尿素合成的前驱物在氮化反应过程中相变和反应速率存在较大差异。在没有添加尿素合成的前驱物的氮化反应过程中,出现了γ-Al2O3、α-Al2O3、AlON和AIN相,该前驱物的反应速率慢,完全氮化需要在1600℃下才能完成。对于添加尿素合成的前驱物而言,在其氮化反应过程中仅出现了γ-Al2O3和AIN相,没有α-Al2O3和AlON的生成,AIN直接由γ-Al2O3氮化生成,该前驱物的氮化反应速率快,氮化反应温度低,在1400℃下即可实现完全氮化。分析讨论了两种前驱物的氮化反应速率不同的主要原因,并利用XRD、SEM等分析方法对粉末进行了表征。     

含腐蚀凹坑尿素合成塔的安全评定与分析

对尿素合成塔上封头腐蚀凹坑采用中国SAPV-95和美国API579规范分别进行安全评定，给出安全裕度，简略分析安全评定的结果。     

聚丙烯表面改性及与涂料的粘结

讨论了聚丙烯制品喷涂着色的优点及影响聚丙烯制品与涂料之间粘结强度的各种因素。综述和评价了对聚丙烯进行表面改性的必要性及各种表面改性方法。     

Urea briquette applicator for transplanted rice

A plunger-type, completely hand-operated applicator prototype, made of polyvinyl chloride (PVC), for deep placement of urea briquettes (UB), i.e., pillow-shaped urea supergranules with edges, in line transplanted rice has been developed for use by small-scale rice farmers. The field evaluation of the applicator was conducted in the Philippines during the 1989 dry season. The applicator consistently placed UB at proper depth (7 to 8 cm), which resulted in low concentrations of urea N (<7 ppm) in about 4 cm of floodwater 1 day after placement. These findings indicated that the prototype worked properly. Average work output of the applicator was 0.20 ha workday^–1 and may increase with practice. The yields of irrigated transplanted rice in the field trials show that agronomic efficiencies of hand-placed UB and applicator-placed UB were equal and were superior to those of split-applied prilled urea.