Effects of can parameters on canned—forging process of TiAl base alloy（Ⅱ）——Mechanical behavior

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｉＡｌａｌｌｏｙｈａｓｌｏｎｇｂｅｅｎｃｏｎｓｉｄｅｒｅｄａｓａｐｒｏｍｉｓ ｉｎｇｍａｔｅｒｉａｌｆｏｒｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎ ,ｄｕｅｔｏｉｔｓｅｘｃｅｌｌｅｎｔｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ ｐ     

原位反应自发渗透法TiC／AZ91D镁基复合材料及AZ91D镁合金的拉伸变形与断裂行为

利用原位反应自发渗透技术合成了47．5％碳化钛TiC（体积分数，下同）增强AZ91D镁基复合材料，对比研究了该复合材料与铸态镁合金AZ91D基体的室温与高温拉伸变形行为，观察了拉伸断口微观组织形貌，并分析了这两种材料的断裂特征。结果表明，TiC／Mg复合材料具有良好的高温力学性能，在拉伸变形速率为0．001s^-1以及温度为723K，时其拉伸强度可达91．1MPa，而此时相同变形条件下的铸态AZ91D镁合金拉伸断裂强度只有41．1MPa，增幅达120％。而在室温下，镁基复合材料的拉伸断裂强度仅高出基体铸态镁合金23．4％。镁基复合材料的断裂应变较低，高低温时均表现为脆性断裂；而镁合金则由室温下的脆性断裂向高温下的韧性断裂过渡。     

快速凝固铝硅合金粉末加热过程中硅颗粒的粗化行为

利用差示扫描量热仪(DSC)、电子显微镜等设备对Al-12.8%Si合金粉末的原始状态及热处理后的状态进行了分析。发现其显微组织有两个连续的变化过程:在156℃时,固溶在基体Al中的过饱和Si开始析出,并在340℃发生粗化,随着加热温度的升高,粗化现象仍然存在。另外,对Si颗粒的粗化机理进行了研究,发现其粗化符合经典的LSW理论。     

连续铸轧流变行为的物理模拟及其应力-应变关系的演变

在Gleeble-1500热/力机上用专制的夹具系统对铝合金铸轧过程流变行为及其影响因素进行了系列的模拟实验研究,得到了不同变形条件下铝合金瞬态凝固连续固态流变成形过程中的形变规律.实验表明铝合金的[液-糊状-固]流变过程存在4个不同特征阶段,通过对实验数据进行多元线性回归分析,建立了适用于连续铸轧这一特定工况条件下铝合金流变本构方程.     

无损检测的质量控制技术

以控制无损检测中的误判为例,介绍了质量控制技术在无损检测质量管理工作中的应用.首先利用流程图发现出现误判问题的产生环节,即缺陷的定位或定量错误.然后利用两图一表(因果图、排列图和检查表)分析引起缺陷定量或定位错误的原因.最后制定了防止误判产生的对策表.采用质量控制技术可以实现无损检测质量的持续改进.     

镁基复合材料微区力学状态的有限元分析

弹性变形范围内,在采用三维有限元模型分析了颗粒增强Mg基复合材料(PRMMCs)中,颗粒的分布形态对材料微区力学状态的影响。结果表明,在保持颗粒长径比(2:1)和颗粒间距(d)不变的情况下,随着θ的变化,不存在颗粒断裂的危险,材料的主要失效方式为界面脱离和基体开裂。增强体相对夹角θ=15o时的结果优于其它情况,这更有利于充分发挥材料的性能。     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.     

纳米W-Cu粉末的均相沉淀法制备及其烧结性能

采用湿化学工艺--蒸氨均相沉淀法,制备了纳米CuWO4·2H2O/Cu2WO4(OH)2均相沉淀物,然后煅烧、还原,得到含Cu 30%的W-Cu复合粉.将该复合粉压坯在H2气氛中于不同温度下烧结后,对烧结体的微结构和物理、力学性能等进行了测试分析.实验结果表明:蒸氨均相沉淀法制备的W-Cu复合粉体具有纳米粒度和均匀的化学组成,其烧结活性高,在较低温度下烧结即可达很高的致密化程度.由上述W-Cu粉体所制备的烧结体具有良好的物理、力学性能.     

Development of microstructure and mechanical properties of a Ni-base single-crystal superalloy by hot-isostatic pressing

Effects of the hot-isostatic pressing (HIP) process on microstructures and mechanical properties of Ni-base single crystal superalloy CMSX-4 were investigated. In the overall heat treatment process, the HIP treatment remarkably induced the healing behavior of micropores and decreased the pore size and porosity of superalloy CMSX-4 compared with normally treated specimens. The microstructure of γ′ phase after the HIP process showed rather a coarsening tendency and could be developed by the partially solution and aging treatment. Consequently, the elimination of cast micropores using the HIP step resulted in the inhibition of crack initiation in microstructure and improved the stress-rupture lives of Ni-base single crystal superalloy by 185%.     

粉末冶金法制备SiC晶须增强MB15镁基复合材料

采用粉末冶金法制备了SiC晶须增强镁基复合材料(SiCW／MB15)试样。通过检测基体显微硬度探讨了SiCW对镁合金时效规律的影响，并借助扫描电镜(SEM)、透射电镜(TEM)和拉伸试验，研究了混粉方式对复合材料室温力学性能、SiCW分布及显微结构的影响。结果表明，MB15及其复合材料的时效硬化曲线上均存在双峰现象；SiCW的加入既提高了MB5的硬度，又加快了其时效速度：混粉方式对晶须分布及SiCW／MB15复合材料的室温力学性能影响很大。