真空技术在污水处理中的若干典型应用

介绍了真空技术在污水处理中的几种典型应用，真空结晶法在以分离污水中具有结晶性能的固体溶剂；真空过滤脱水用于初沉池和消化池污泥脱水，真空浮选法通过制造负压条件加速浮选过程；还有真空搅拌、真空脱气等等。这些足以说明真空技术在污水处理乃至环境保护中占有重要的一席之地。     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.     

省煤器管开裂原因分析

对省煤器开裂管进行了化学成分及宏、微观分析。分析结果表明，在高温高压条件下，在其焊缝溶合区出现粗大的魏氏组织，管材中的珠光体组织产生了不同程度的球化，而母材组织又存在严重的带状组织。在过热条件下熔合区极易出现裂纹，并由此快速扩展，造成省煤器管开裂。     

进口VPSA制氧装置的流程特点及配置

详细介绍了进口的VPSA制氧装置的流程特点、工艺参数及主要设备的配置。实际运转证明 ,该制氧装置具有运行可靠、启动时间短、部分负荷性能优越、负荷转换速度快等优点 ,能满足金隆铜业有限公司的实际生产要求。     

MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

理学SMX-10/11型X荧光光谱仪的改进

对理学SMX-10／ll型X荧光光谱仪真空系统、样品定位系统及热交换器冷却水循环路径等易发生故障部位进行改进，并在11型仪器上增加了S元素分析通道。生产应用表明，改进效果良好，简化了分析工艺。降低了分析成本，提高了仪器的稳定性。     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

Rheology in Processing of in Situ Composites of Polypropylene and Low Melting Poing Metals

The low melting point metallic tin powder or alloy of tin and lead was blended with polypropy-lene. A kind of in situ composite has been prepared. The variations of torque were studied when the composites were mixed in Haake torque rheogeniometer. By way of capillary extrusion, effects upon rheology of the in situ com-posites of the low melting point metals (LMPM) and coupling agent for their different variety and content, were investigated. From flow curves, the results indicate that in situ composites mixed with the LMPM are a kind of pseudoplastic fluid. If the LMPM were melted, the higher the content of the LMPM , the lower apparent viscosity of composites. Meanwhile, when the coupling agent is added into composites, the viscosity of composite will go up first and drop then. This shows that the LMPM have a promoter flow action on the polypropylene.     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。