The extracorporeal circuit: Materials,problems, and solutions

The extracorporeal circuit in hemodialysis and related therapies facilitates passage of blood to and from the patient and forms an integral link with the safety systems of the proportioning system. Historically, elements of the circuit were subject to problems such as spallation introduced by the blood pump and plasticizer from the tubing sets leaching into the blood. Many of these early issues have been largely resolved, although there is still potential for further improvement and innovation. The introduction of such improvements and innovations into clinical practice is critically dependent upon their cost and benefit to patient and renal unit staff.     

混凝土输送泵的常见故障及排除

介绍了混凝土输送泵的常见故障，阐述了混凝土输送泵墙管的排除方法，指出只有认真分析造成故障的各种原因，才能按照先外后内、先易后难的原则进行故障处理。     

理学SMX-10/11型X荧光光谱仪的改进

对理学SMX-10／ll型X荧光光谱仪真空系统、样品定位系统及热交换器冷却水循环路径等易发生故障部位进行改进，并在11型仪器上增加了S元素分析通道。生产应用表明，改进效果良好，简化了分析工艺。降低了分析成本，提高了仪器的稳定性。     

软启动器在深井泵电动机上的应用

论述了几种三相交流异步电动机的起动方式及其优缺点 ,介绍了新型的电子软启动方式在我厂深井泵电动机上的应用及取得的运行效果 ,为电动机软启动方式在工矿企业中的应用提供了应用经验。     

防盐抽油泵的研制及在文留油田的应用

文留油田因其独特构造和地层特点，抽油井结盐严重，文中通过对油井结盐机理及抽油泵结盐主要形式、原因的分析，有针对性地开发了防盐抽油泵，并介绍了防盐泵的结构和主要技术特点，在实际应用中配套应用相应防盐技术，取得了较好的效果，极大地减少了盐卡泵现象，抽油井检泵周期得以延长，为其它油田类似油井生产管理提供了新方法。     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

一种基于TDA16846的新型有源功率校正电路设计

介绍一种由集成电路芯片TDA16846完成的利用电荷泵(Charge Pump)实现的有源功率因数校正(APFC)技术。这种APFC电路的突出优点就是结构简单,通过对常规缓冲电路进行合理调整,可以很容易变成具有PFC功能的高性能开关电源。分析了APFC的工作原理,应用专用芯片TDA16846设计了电路图,并阐述了主要元件的功能。经实验证明,推荐电路设计合理,应用前景广阔。     

潜油电泵易损零部件失效分析方法

通过对大庆油田近5 a潜油电泵易损零部件的数据统计,应用可靠性分析理论和方法研究了易损零部件的失效规律,得出4大部件的故障率占整个机组系统的91.7%,其可靠度由小到大的次序为电机、保护器、电泵和分离器。在这4大部件中,可靠度较低的零件主要有泵轴、叶导轮、扶正轴承、胶囊和保护器轴,其中泵轴、叶导轮、扶正轴承的主要失效模式是磨损,连接螺栓的主要失效模式是断裂失效。     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

能量分析法在空气源热泵除霜中的应用

针对空气源热泵冷热水机组冬季制热运行时换热器结霜与除霜的问题，提出了一种能量分析法。从能量转换和能量传递的角度出发，分析一种常见的除霜方法——逆循环除霜。通过对除霜过程的讨论，找出了相应的减少除霜损失的方法。