基于改进型BP神经网络的湿重软测量

针对制浆造纸工业中湿重无法在线测量的难题，分析了湿重值与进浆流量、打浆浓度、打浆电流及原湿重值等参数的关系。提出了基于改进型BP神经网络的湿重软测量技术。成功的完成了湿重在线检测。     

In-Situ Wet Chemical Composition of Multicomponent Precursors to Blue Emitting Sr2CeO4 Phosphors

Hybrid precursors were assembled with cerium coordination polymers, polyethyl glycohol (PEG), SrCO3 and other functional components using a modified in-situ chemical polymeric gel technology. The hybrid precursors were calcinated to achieve the Sr2CeO4 phosphors, whose particle sizes were in the range of micrometer by XRD and SEM. The photoluminescence spectra indicate that the phosphors present a strong blue emission.     

Modeling the effect of pigment morphology on the dynamic compression of coating layers using DEM

In the present paper, discrete element method (DEM) was employed to investigate the effect of pigment morphology on packing dynamics and compressive behavior of paper coating layers in calendering process. Spherical, platy, and needle-like particles, representing GCC, delaminated clay, and aragonite PCC pigments, were considered in this study. For each particle shape, the compression of coating structures formed by mono-sized and poly-dispersed pigments were modeled. Stress–strain behavior of the coating layers and in-plane and out-of-plane movements of the pigment particles during the compression were computed under the same maximum compressive stress. Simulation results revealed that the in-plane movements of the pigment particles during compression in the calender nip were small in magnitude (<0.35 μm). These findings help to better understand the smoothening phenomena of coating structures during the calendering process.     

An examination of the effect of composite constituent properties on the notched-strength performance of composite materials

The effect of matrix and fiber properties on the strengths and failure processes of notched, continuous-fiber composite specimens has been investigated. Bearing, open and filled hole tension and compression tests were conducted on AS-4/3501-6, IM-8/3501-6, AS-4/APC-2 and IM-8/APC-2 specimens. Failure characteristics of tested specimens were studied by fractographic techniques. Failure progression was tracked by means of incremental loading, radiography and fractographic inspection.     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

PWR核电站蒸汽发生器停堆湿保养工况联氨的缓蚀作用

一、引言压水堆(PWR)核电站蒸汽发生器(SG)管材因二回路系统腐蚀产物积累发生应力腐蚀开裂,这是SG传热管破损的主要原因之一。维修和更换SG使PWR停运期间所需要的替用电力对发电站造成很大的财政负担,同时,二回路系统的腐蚀产物沉积在蒸汽发生器内,降低     

炼厂碱渣处理工艺及设计优化

针对催化裂化装置汽油和液态烃精制产生的含硫废弃物的碱渣处理，讨论了碱渣提酚、碱渣湿式氧化脱臭两种处理工艺的环境治理效果，并就碱渣湿式氧化脱臭工艺如何降低运行成本、减少污水排放等内容进行了探讨。     

Synthesis, characterization and catalytic application for wet oxidation of phenol of iron-containing clays

High-surface-area pillared clays (PILC) were prepared from naturally occurring montmorillonites by exchanging interlayer ions to polyoxocations containing (i) aluminum (Al₁₃-PILC), (ii) iron adsorpted onto Al₁₃-PILC, and (iii) iron and aluminum located within the same complex (Fe_0.8Al_12.2-PILC). The obtained Fe_0.8Al_12.2-PILCs were characterized by DR–UV–vis and IR spectroscopy, XRD, ESR, scanning electron microscopy and low temperature N₂ adsorption measurements. Important factors affecting catalyst activity and phenol removal efficiencies have been studied, i.e. the effect of pH, temperature, catalyst concentration and stability of the catalyst.     

Kinetics of phenol oxidation in a trickle bed reactor over active carbon catalyst

The wet air oxidation of phenol over a commercial active carbon catalyst was studied in a trickle bed reactor (TBR) in the temperature and oxygen partial pressure ranges of 120–160 °C and 0.1–0.2 MPa, respectively. The performance of the active carbon was compared in terms of phenol and COD destruction. The weight change of active carbon due to reaction was also measured. Finally, oxic phenol adsorption isotherms were assessed in batch conditions at 25, 125 and 160 °C. In order to use the conversion data obtained from the TBR for a kinetic study, special care was taken to check the kinetic control in the TBR experiments. Several kinetic models including power law or Langmuir–Hinshelwood expressions were considered to describe the catalytic oxidation of phenol over active carbon. The simple power law model with first order dependence on both phenol and oxygen concentration predicted satisfactorily the experimental data not only over the entire range of operating conditions studied, but also outside its validity range. Copyright © 2005 Society of Chemical Industry     

Radiosity with Well Distributed Ray Sets

In this paper we present a new radiosity algorithm, based on the notion of a well distributed ray set (WDRS). A WDRS is a set of rays, connecting mutually visible points and patches, that forms an approximate representation of the radiosity operator and the radiosity distribution. We propose an algorithm that constructs an optimal WDRS for a given accuracy and mesh. The construction is based on discrete importance sampling as in previously proposed stochastic radiosity algorithms, and on quasi Monte Carlo sampling. Quasi Monte Carlo sampling leads to faster convergence rates and the fact that the sampling is deterministic makes it possible to represent the well distributed ray set very efficiently in computer memory. Like previously proposed stochastic radiosity algorithms, the new algorithm is well suited for computing the radiance distribution in very complex diffuse scenes, when it is not feasible to explicitly compute and store form factors as in classical radiosity algorithms. Experiments show that the new algorithm is often more efficient than previously proposed Monte Carlo radiosity algorithms by half an order of magnitude and more.