露天铝土矿山粉尘治理措施

介绍了露天矿山铝土生产流程、产尘源及产尘设备。针对各产尘源的治理进行了分步分析。提出了治理措施。从而有效降低了铝土露天矿山生产过程中外排及岗位粉尘浓度。     

水平管内流型转换区湿气流经多孔板的压降特性

较之于传统的单孔板,多孔板有压损系数小、整流、低噪声等多方面优点,在湿气流量测量中具有重要应用价值。以空气和水为两相工质,在水平管内湿气流型转换区对小孔分别呈圆形和矩形的2个多孔板的压降特性进行了实验。结果表明:圆孔、槽孔多孔板的湿气压降特性无明显差别;多孔板的气相压降倍率与气相、液相弗劳德数均密切相关;与实验结果相比,现有均相流模型的预报结果均偏高,现有分相流模型的预报结果均偏低;通过气相、液相弗鲁德数双参数对孔板湿气压降模型进行修正,可明显提高压降关联式的预报准确度;基于均相流模型双参数修正所得的多孔板压降关联式的预报精度最优,对圆孔多孔板、槽孔多孔板的预报偏差分别在±7%、±10%以内。     

新型水下焊接电源及送丝机构的研究

研究了一种新型的水下焊接系统。系统中孤焊电源输出阶梯型的外特性，送丝系统采用脉动送丝方式。在单片机控制下，脉动送丝波形与外特性同步调控。在停止送丝阶段，单片机夸电源输出电压为峰值，焊丝在此电压下返烧并形成熔滴。送丝脉冲到来的瞬间，电源输出电压切换为基值。熔滴依靠送丝动量向熔地方向前进，最终向熔池过渡，随着焊炬的移动而彤成一道焊缝。实验结果表明，使用这个系统进行气体保护药芯焊丝水下湿法焊接时，电压、电流波形均匀工整，短路过渡频率受控，焊接过程稳定，水下焊缝成形较为美观。     

Machining characteristics and fracture morphologies in a copper-beryllium (Cu-2Be) alloy

The technology of materials removal is improved greatly by the introduction of advanced cutting tools like cubic boron nitride, ceramics, polycrystalline diamond and the more recent whisker-reinforced materials. In this paper, the influence of cutting temperature on machinability, mechanical properties, microstructure, and fracture morphology of Cu-2Be alloy using a polycrystalline diamond cutter is investigated. The information on machining, microstructure, and fracture morphology of Cu-2Be alloy are very useful to understand their fabrication characteristics and the basic mechanisms of its deformation and fracture. The machinability (in terms of surface finish) of Cu-2Be alloy is evaluated as a function of cutting temperature, resulting from wet and dry cutting. Machining is carried out on a Hardinge Cobra 42 CNC machine (Hardinge Inc., Elmira, NY), and the machining parameters used—cutting speed, depth of cut, and feed rate—are kept constant during both wet and dry cutting. The machined surface finish on Cu-2Be alloy is measured using a surface finish analyzer (Surftest 401, series 178) technique. The machined specimens are examined for their strength and hardness properties using a standard Universal Testing Machine and Rockwell hardness tester, respectively. Wet cutting (using coolants) produced a smooth surface finish when compared with dry cutting of the Cu-2Be alloy. The machined specimens are examined for their microstructural features using a Nikon optical microscope. The specimens are etched using a suitable etchant solution for revealing such microstructure constituents as grain size, phase proportions, and the possible overheated areas (especially in dry cutting). The fractured surfaces from the tensile and impact toughness tests are investigated for their fracture morphologies (dry and wet cutting) using a microprocessor-controlled scanning electron microscope (Jeol Model JSM 5910 LV). A detailed analysis is also made to understand and interpret the basic fracture mechanisms responsible for crack initiation and crack propagation. The Cu-2Be alloy showed relatively higher mechanical properties in wet cutting in comparison to dry cutting operations. Fracture studies demonstrated intergranular and ductile fractures as dominant modes of fracture mechanisms in Cu-2Be alloy.     

2010年长江流域暴雨洪水初步分析

分析2010年长江流域暴雨洪水,有利于更全面认识长江流域暴雨洪水特性,可为今后更好开展长江流域防汛水情保障工程。从主汛期长江流域暴雨及气候特征、干支流主要洪水过程及洪水特性等方面,进行了初步的总结和分析。2010年长江主汛期洪水发生范围广、持续时间长且局部地区洪水量级大,通过与三峡水库蓄水前后几次大的历史洪水分析对比,初步认为,2010年长江流域主汛期出现的洪水为长江上中游区域性较大洪水。     

湿法相分离不对称超滤膜形成机理

本文选择了憎水的极怀非普质子性聚砜和亲水的极性质子怀聚砜酰胺两种膜材料，从铸膜液组成和凝胶过程两方面，用气相色谱和高效液相色谱研究了表征膜材料－溶剂－添加剂－水作用力的混合自由焓，平衡分配常数，及其与膜性能，不同溶剂特性粘度，雾点值和溶解度参数的关系，提出了铸膜液中有机溶剂的作用机理，及不对称超滤膜形成的一些规律。     

均匀湿颗粒材料边界滞回持水曲线的物理模型

非饱和土持水特性的滞回机理是土力学界的热点问题之一。将非饱和土看作“湿颗粒材料”并以“土-颗粒-系统”为视角更易认识其持水特性的滞回机理。以均匀湿颗粒材料为研究对象,用轴对称圆锥形孔隙内水分的充填和排出过程来模拟边界增、减湿过程,提出一种物理模型以描述其滞回特性的物理内涵,并利用已有文献中3种砂土和2种含黏砂土的持水试验结果验证了该模型在表征均匀湿颗粒材料边界滞回持水曲线时的有效性。该模型的优点在于不仅对同种均匀湿颗粒材料滞回的边界减、增湿持水曲线可采用同一组具有物理意义的参数模拟,而且可反映孔隙水内封闭气泡对持水曲线的影响。     

催化湿式氧化吡虫啉农药废水Cu/Mn催化剂稳定性

通过共沉淀法制备了用于湿式氧化吡虫啉农药废水的Cu/Mn复合氧化物催化剂,研究了焙烧温度和活性组分配比等因素对Cu/Mn复合氧化物催化剂的活性及稳定性的影响,确定了最佳制备条件,利用BET比表面积测定和XRD对催化剂进行了表征.结果表明,优化条件制备的Cu/Mn复合氧化物催化剂催化湿式氧化处理吡虫啉农药废水时,具有较高的催化活性和稳定性.Cu/Mn=2∶1,焙烧温度800℃,焙烧时间16h,COD去除率为93.12%,催化剂活性组分的流失小于0.3mg/L.对催化剂活性组分不易流失的原因进行了理论解释和计算.     

浅湿灌溉技术是水稻节水增产的最佳灌溉制度

针对牡丹江地区水资源面临短缺的问题,对林口县刁翎水利试验站进行多年试验,掌握了大量的试验数据。试验证明,浅湿灌溉在诸多节水栽培技术中有明显的优势。