PVC-U型材弹性模量测试偏差分析

在对PVC-U型材弹性模量试验中发现，同一样品的规则样条与不规则样条的弯曲弹性模量相差较大。不规则样条的负荷-挠度曲线上会出现拐点，如果不对曲线进行处理直接计算得到的弯曲弹性模量偏小。在不规则样条的负荷-挠度取拐点后直线段切线与横坐标的交点作零点修正后所测得的弯曲弹性模量比较接近真实值。通过实验可以验证处理后的方法测得的弹性模量与均匀规则样条的弯曲弹性模量相近。     

Harnessing the Melting Peculiarities of Ultra‐High Molecular Weight Polyethylene Fibers for the Processing of Compacted Fiber Composites

Summary: Compacted fiber composites offer unique properties due to their lack of an extraneous matrix. The conditions of processing ultra‐high molecular weight polyethylene (UHMWPE) fibers were simulated in a heated pressure cell. In situ X‐ray diffraction measurements were used to follow the relevant transitions and the changes in the degree of crystallinity during melting and crystallization. The results strongly support the suggestion that the hexagonal crystal phase, in which the chain conformation is extremely mobile on the segmental level, constitutes the physical basis of compaction technologies for processing UHMWPE fibers into a single‐polymer composite. This report suggests that using a pseudo‐phase diagram outlining the occurrence of different phases during slow heating and the degree of crystallinity can provide valuable insight into the technological parameters relevant for optimal processing conditions.

Degree of crystallinity as a function of pressure and temperature in a region relevant to compaction processes.     

熔铸-原位反应法生成α-Al2O3晶须的形貌及结晶方向

利用熔铸－原位反应法制备TiC/Al复合材料时，发现Ti-C-Al反应块表面存在大量的Al2O3晶须，晶须的形貌包括长而直的板状和串珠状，取决于反应进行时铝熔体的温度，当铝熔体温度低于900℃时，形成板状晶须，而当铝熔体温度高于900℃时，形成串珠状的晶须，其原因是由于较高的铝熔体温度加剧了TiC原位反应的放热，热起伏的结果致使部分α－Al2O3晶须异常长大，X射线衍射和透射电镜分析确认晶须为α－Al2O3，其形貌以直板状为主，电子衍射花样斑点显示其结晶方向为[0002]。     

重钙装置改产磷铵后氨化造粒机内部构件的配置研究

重钙装置改产磷铵后,造粒机内的物料行为发生了变化,即“料浆涂布－水分蒸发－氨化反应”这一物理化学过程。喷氨孔与水平线的夹角是影响这一过程的重要因素,本文对夹角的确定进行了理论分析。在实验基础上,对造粒机预中和料浆喷头位置、氨分布管的长度和角度进行了重新配置。生产表明,重新配置的造粒机内部构件具有很好的造粒效果。     

2,2′-oxo-1,1′-azobenzene: microbial transformation of rye (Secale cereale L.) allelochemical in field soils byAcinetobacter calcoaceticus: III

Acinetobacter calcoaceticus, a gram-negative bacterium isolated from field soil, was found to be responsible for the biotransformation of 2(3H)-benzoxazolinone (BOA) to 2,2-oxo-1,1-azobenzene (AZOB). Experiments were conducted to evaluate the transformation of BOA to AZOB by this microbe in sterile and nonsterile soil. Transformation studies with soils inoculated withA. calcoaceticus indicated that the production of AZOB increased linearly with the concentration of BOA in sterile soil and showed a quadratic trend in nonsterile soils. This also indicated that all soil types studied for the transformation experiments might containA. calcoaceticus capable of the conversion of benzoxazolinones.     

Catalytic hydrogenation of nitrile rubber using palladium and ruthenium complexes

The catalytic hydrogenation of acrylonitrile‐butadiene copolymer (nitrile rubber, NBR) using Pd(OAc)₂ or RuCl₂(PPh₃)₃ catalysts has been investigated in order to produce a totally saturated nitrile rubber. The hydrogenation of NBR is effective with both catalysts and achieved total conversion under the appropriate reaction conditions. In the case of palladium the effects of reaction parameters such as reaction temperature, pressure, time, catalyst concentration, and NBR concentration have been investigated. Even though both ruthenium‐ and palladium‐based catalysts are effective in the production of HNBR, the former requires harsh reaction conditions and has the drawback of gel formation under high conversion, motivating the migration to RuCl₂ (PPh₃)₃ as an alternative catalyst. The degree of hydrogenation was determined by IR and NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

特种工程塑料聚芳醚酮

介绍了聚芳醚酮的发展概况、分类及其物化性能;重点对PEEK的性能及应用进行详细阐述;概述了PEEK 的最新研究成果,并指出其今后发展趋势。     

软件定义网络中交换机处理时延的仿真

针对目前的网络仿真工具在对软件定义网络(SDN)的仿真过程中,未考虑交换机的处理时延的问题,提出一种处理时延的仿真方法,目的是为了使仿真结果更加真实和准确。该方法首先将交换机的转发处理过程分解为对流表的查询操作和执行不同的动作;然后,利用交换机的处理器频率和访存周期,将查询流表和执行动作转换为处理时间。实验中测量了真实环境中不同配置的交换机处理时延,并与利用该方法仿真出的处理时延进行对比。实验结果表明,利用该方法仿真出的处理时延和真实交换机的处理时延基本一致,该方法能够较准确地仿真交换机处理时延。     

Surface morphology control of immiscible polymer-blend thin films

The effects of the molecular weights (molecular weight of polystyrene, M_w,PS, varying from 2.9 to 129 k) on the surface morphologies of spin-coated and annealed polystyrene/poly (methyl methacrylate) (PS/PMMA=50/50, w/w) blend films were investigated by atomic force microscopy and X-ray photoelectron spectroscopy. For the spin-coated films, when the M_w,PS varied from 2.9 to 129 k, three different kinds of surface morphologies (a nanophase-separated morphology, a PMMA cellular or network-like morphology whose meshes filled with PS, a sea-island like morphology) were observed and their formation mechanisms are discussed, respectively. Upon annealing, two different morphology-evolution processes were observed. It is found that a upper PS-rich phase layer is formed when M_w,PS<4 k, and this behavior is mainly attributed to the low interfacial tension between PS and PMMA component. When M_w,PS>4 k, the PS-rich phase forms droplets on top of the PMMA-rich phase layer which wets the SiO_x substrate. These results indicate that the surface morphology of the polymer blend films can be controlled by the polymer molecular weight and annealing conditions.     

基于EIGamal签名的隐私保护网上交易方案

针对网上交易时的用户个人隐私安全问题,依据不经意传输理论,基于ElGamal签名的不经意签名电子信封(OSBE)模型,提出了一个可保护用户隐私的网上交易数字商品方案.首先用户匿名付费给银行,然后银行将用户订购商品的数字签名发送给用户,接着用户使用数字签名与商家进行不经意信息交互,最后用户得到且只能得到自己订购的数字商品,商家并不知道用户订购何种数字商品.正确性证明和安全性分析结果表明,可以有效地保护用户在网上交易过程中的个人隐私,同时防止商家恶意欺诈行为.该方案签名相对较短,计算量较小,密钥动态变化,安全性更强.